Thank you for updating the situation here. It has been hard to keep up
with the packaging for the PPA as it has been a fairly manual process to
this point. We are in the process of pulling packaging definitions for the
ppa into the source tree so far as it makes sense to do so to automate the
pro
Probably an installation issue. But I’m
Not sure what.
Sent from my iPhone
> On Mar 16, 2021, at 7:01 AM, COURANT Frederique - Contractor
> wrote:
>
>
> Hi Marcus,
>
> I hah install UHD and Gnuradio manually.
> This morning I have reinstall all this applications with gnuradio 3.8.
> It
connected the antenna to the good channel Rx/TxThanks, I have been checking
out your suggestions.
What i meant by "negative Tx power" is that the Tx power is giving negative
value (-30dbm)
1. I have upgraded to GNURadio >=3.8 but it is giving this warning message
after trying to import QT GUI sink
Hello GNURadio Community,
I am having trouble getting the PLL Carrier Tracking Block to work
properly. I designed the GRC with a qpsk constellation modulator at a
sample rate of 40 k Hz. I designed the PLL Carrier Track block to correct
incoming waveforms that are off centered from DC by +/-500 Hz
Ok, please forget my question.
I have found that I need to specify the Makefile generator which at
least in my case is NMake by default but I need MinGW.
Now I have to install missing software (e.g. boost).
Ralf
-30 dBm sounds correct for a gain of 45 if you are using a B200 family
USRP. They have a maximum tx power of about +10 dBm at a gain of 89.
Run uhd_usrp_probe to see the full available gain information for your USRP.
On 3/16/2021 5:11 PM, AKINYELE ITAMAKINDE wrote:
connected the antenna to the
I’ve suggested this to you before.
Start with a pure some way at your target frequency—what does your spectrum
analyzer say about power. Now
Modulate it to produce a bandwidth of 1khz—what does your spectrum analyzer say
about the power in each bin? Now what about with 10khz of modulation bandw
Hi! Any pointers to where I can start debugging this?
Maybe run gnuradio-companion in debug mode?
Do more simpler tests?
Any other suggestions?
I have a HackRF One and will try the exact same comparison there too ...
SDRAngel & grc
On Mon, Mar 15, 2021 at 7:32 PM Anish Mangal wrote:
> Hi,
>
>
