> -Original Message-
> From: discuss-gnuradio-bounces+r.wierse=brunel...@gnu.org
> [mailto:discuss-gnuradio-bounces+r.wierse=brunel...@gnu.org]
> On Behalf Of Josh Blum
> Sent: Thursday, June 23, 2011 5:35 PM
> To: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio] E100 - No devic
Dear GNU Radio community,
I and my group had this tutorial/code walkthrough to share. we found out
that it is quite hard for beginner to start with GNU Radio, hopefully this
walkthrough explanation can help a bit.
this is the 1st version. please help us to improve by giving comment on any
mista
I've tried that using the following commands:
*
sudo apt-get purge gnuradio gnuradio-companion
sudo apt-get autoremove
sudo rm -rf /usr/share/gnuradio *#this also removes the library tarball*
*
Then I reboot and run my shell script to install GNU Radio and its tarball
again. Is there something m
On Mon, Jun 27, 2011 at 09:17:22AM -0400, Randy Westlund wrote:
> I've tried that using the following commands:
>
> sudo apt-get purge gnuradio gnuradio-companion
> sudo apt-get autoremove
> sudo rm -rf /usr/share/gnuradio #this also removes the library tarball
>
> Then I reboot and run my shel
Hi Marcus its more than 48 hours now and still the same message :(
Continuing with script
Installing pre-prequisites...Checking for package libfontconfig1-dev
Checking for package libxrender-dev
Checking for package libpulse-dev
Checking for package swig
Checking for package g++
Checking for pack
On 06/27/2011 06:36 AM, Martin Braun wrote:
> On Mon, Jun 27, 2011 at 09:17:22AM -0400, Randy Westlund wrote:
>> I've tried that using the following commands:
>>
>> sudo apt-get purge gnuradio gnuradio-companion
>> sudo apt-get autoremove
>> sudo rm -rf /usr/share/gnuradio #this also removes th
Dear Adib,
Very good initiative! If you need some help, fell free to ask for.
Regards,
Ronaldo
On Mon, Jun 27, 2011 at 9:43 AM, adib_sairi wrote:
>
> Dear GNU Radio community,
>
> I and my group had this tutorial/code walkthrough to share. we found out
> that it is quite hard for beginner to
I found the files you indicated and wiped those with my last reinstall, but
I still get the same error. Any other ideas?
Randy
On Mon, Jun 27, 2011 at 9:36 AM, Martin Braun wrote:
> On Mon, Jun 27, 2011 at 09:17:22AM -0400, Randy Westlund wrote:
> > I've tried that using the following commands
On 27/06/2011 11:08 AM, sumitstop wrote:
Hi Marcus its more than 48 hours now and still the same message :(
Continuing with script
Installing pre-prequisites...Checking for package libfontconfig1-dev
Checking for package libxrender-dev
Checking for package libpulse-dev
Checking for package swig
> we don't manage wih the E100 FPGA5 bitstream.
> It is placed in the images directory and we use a new branch but we
> don't really think the FPGA5 is used.
What do you mean?
> And we still have the same problem with parallel UHD devices (sink/source).
>
Another guy confirmed it was working
I have a really simple question that I can't seem to find the answer to online
(and pardon my limited signal processing background). I'm trying to help a
fellow colleague figure out a processing problem.
An external code modulates a real-valued signal that is eventually fed into
GRC. For now t
Moin,
my notebook, that run with Linux, have only a mono input channel. I'm looking
for a external (USB 1.1 or 2.0) soundcard with a stereo input, that run fine
with linux.
Any hint?
Thanks
--
|Michael Renner E-mail: michael.ren...@gmx.de |
|D-81541 Munich GermanyICQ: #11228
On Mon, Jun 27, 2011 at 11:02 AM, Tom Hendrick wrote:
> I have a really simple question that I can't seem to find the answer to
> online (and pardon my limited signal processing background). I'm trying to
> help a fellow colleague figure out a processing problem.
>
> An external code modulates a
Hi Sumit,
There are two links that we can use to access the current version of the
GNU Radio source: git://gnuradio.org/gnuradio and
http://gnuradio.org/git/gnuradio.git .
As of now, the second link does not work for me, but the first one does.
You might be able to fix your problem by findi
Hi
I am new to python and I need to know about adding new blocks.
I modified the benchmark_tx and rx.py files, so that the receiver will
get the file from sender and store it in a txt file which is passed as
an arguement. I also added few lines of code so that the receiver
calculates the number of
On 27/06/2011 3:29 PM, Christopher Dean wrote:
Hi Sumit,
There are two links that we can use to access the current version of
the GNU Radio source: git://gnuradio.org/gnuradio and
http://gnuradio.org/git/gnuradio.git .
As of now, the second link does not work for me, but the first one
does
OOPS and it worked .. thanks a lot :)
Christopher Dean-3 wrote:
>
> Hi Sumit,
>
> There are two links that we can use to access the current version of the
> GNU Radio source: git://gnuradio.org/gnuradio and
> http://gnuradio.org/git/gnuradio.git .
>
> As of now, the second link does n
Hi Marcus you were right.I just came to know that git protocol was not
working for some reasons in my institute.
Replacing with the link told by Chris worked finally :)
Marcus D. Leech wrote:
>
> On 27/06/2011 3:29 PM, Christopher Dean wrote:
>> Hi Sumit,
>>
>> There are two links that we can
Hi Burak
You can find sample for AM recorded through USRP here
http://www.csun.edu/~skatz/katzpage/sdr_project/sdr/am_usrp710.dat.zip
Burak TUYSUZ wrote:
>
> Hi,
>
> I was wondering if there is a sample received signals for Analog TV,
> Digital
> TV, GPS, FM etc. that are captured by USRP.
>
And a new error came
Fetching Gnu Radio via GIT...Done
Fetching UHD via GIT...Done
Building UHD...Done building/installing UHD
Fetching and installing FPGA/Firmware images via wget...
...Installing from:
tar: Old option `f' requires an argument.
Try `tar --help' or `tar --usage' for more informat
Hello,
I programmed a module into the FPGA that is able to process separately two
independent signals at the same time with the LFRX. Using and external
oscilloscope and the LFTX I checked that it works properly.
Now, I tried to check the output on the PC side using tools like *fft_sink_c
* or *s
On Mon, Jun 27, 2011 at 2:12 AM, Abhishek wrote:
> Hi all,
>
> I want to access comedi drivers using gnuradio. comedi provides drivers for
> 600+
> DAQ cards.
>
> Is there any documentation available for same.
>
>
> Thanks,
> Abhishek.
>
I don't think that we have any in the code, and I'm not sur
_ronaldo wrote:
>
> Dear Adib,
>
> Very good initiative! If you need some help, fell free to ask for.
>
> Regards,
>
> Ronaldo
>
> On Mon, Jun 27, 2011 at 9:43 AM, adib_sairi wrote:
>
> ___
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.
Hello,
I modified "benchmark_tx.py and benchmark_rx.py" by replacing the
usrp_source/sink with gr.udp_source/sink and gr.file_source/sink, to see if the
generated IQ data from tx side can be correctly captured and processed at rx
side via UDP socket or trace file instead of USRP. If it does, t
24 matches
Mail list logo
