On 06/25/2020 12:44 PM, Cameron Matson wrote:
I moved my setup from e312s to n310s so that I could run the
flowgraphs with the gui blocks to help with debugging. It looks like
the phase is off at the RX as the constellation gui from the USRP (the
one before the Packet Rx block) is rotating. I
I moved my setup from e312s to n310s so that I could run the flowgraphs
with the gui blocks to help with debugging. It looks like the phase is off
at the RX as the constellation gui from the USRP (the one before the Packet
Rx block) is rotating. I'm able to adjust the magnitude of the IQ data by
Marcus,
Thanks for that information, maybe I'll look more into the FPGA.
As for the other problem I agree, it's probably setup. The radios are
"connected" via antennae. Both USRPs have VERT900 antennae to the TRX
terminals.
I've run other experiments successfully transmitting data from one to t
On 06/23/2020 01:17 PM, Cameron Matson wrote:
I've tried from 125K to 16M (which if I request anything higher is
what the device seems to cap it at). The lower sample rates on the RX
side actually do solve the O problem, which I guess makes sense, but
the tG and U are still there on the TX sid
I've tried from 125K to 16M (which if I request anything higher is what the
device seems to cap it at). The lower sample rates on the RX side actually
do solve the O problem, which I guess makes sense, but the tG and U are
still there on the TX side, and no packets seem to be decoded.
Cameron
On
What sample rate ranges have you tried?
Sent from my iPhone
> On Jun 23, 2020, at 12:57 PM, Cameron Matson wrote:
>
>
> Hello all,
>
> I'm new to gnuradio and SDR so I hope there isn't something obvious I'm
> missing. I'm trying to get a packet based system set up. I'm using gnuradio
> 3
