>-Original Message-
>From: Thomas Hobiger [mailto:hobi...@nict.go.jp]
>Sent: Tuesday, November 30, 2010 01:04 AM
>To: b...@sigmatix.com
>Cc: j...@joshknows.com, discuss-gnuradio@gnu.org
>Subject: Re: [Discuss-gnuradio] GRC with two URSP2+DBSRX andUHD
>
>Hi B
Hi Bob,
This is pretty easy to do (but, I can only tell you how to do it in C++)...
set_clock_config() in UHD
Do you have some code snippet to share? Does the C++ version support
streaming data from a slave device through a host URSP2 before sending
all data via a single ethernet cab
>
> I see. But this can't be the (only) reason for my errors. When I select
> "don't sync" I don't get the warning abou the time stamps but I end up
> again with
>
If you dont select the sync option, then you wont get the warning about
the time offset. I should have it preform the time check re
Hi Josh,Hi Josh,
Thanks for the reply. I am using a MIMO cable between both URSP2s, so I
thought that they sync automatically.
I am not feeding a PPS to both devices, as I only need to run both
synchronously, but I don't need to sync them to outside references.
Aha. That feature is not im
-Bob
>-Original Message-
>From: hobi...@nict.go.jp [mailto:hobi...@nict.go.jp]
>Sent: Sunday, November 28, 2010 11:40 PM
>To: j...@joshknows.com
>Cc: discuss-gnuradio@gnu.org
>Subject: Re: [Discuss-gnuradio] GRC with two URSP2+DBSRX andUHD
>
>Hi Josh,
>
>Tha
On 11/28/2010 11:40 PM, hobi...@nict.go.jp wrote:
> Hi Josh,
>
> Thanks for the reply. I am using a MIMO cable between both URSP2s, so I
> thought that they sync automatically.
> I am not feeding a PPS to both devices, as I only need to run both
> synchronously, but I don't need to sync them t
Hi Josh,
Thanks for the reply. I am using a MIMO cable between both URSP2s, so I
thought that they sync automatically.
I am not feeding a PPS to both devices, as I only need to run both
synchronously, but I don't need to sync them to outside references.
Thomas
- Original Message -
> F
>From what I can tell, the times are not locked, samples cannot be
aligned, so there can be no output. Did you
http://www.ettus.com/uhd_docs/manual/html/usrp_nxxx.html#pps-pulse-per-second
> Warning:
> Detected time deviation between board 1 and board 0.
> Board 0 time is 490.997360 second
