If you're not tied to Wayland, you can go back to X.org in the boot
screen (click the "cog" in the lower right hand corner).
Ron
On 8/4/21 1:09 PM, Vincenzo Mone wrote:
Hi to the list,
I have a warning in the gnuradio when I run any grc file that says:
<< Welcome to GNU Radio Companion 3.8.
Hi to the list,
I have a warning in the gnuradio when I run any grc file that says:
<< Welcome to GNU Radio Companion 3.8.2.0 >>>
Block paths:
/usr/share/gnuradio/grc/blocks
/usr/local/share/gnuradio/grc/blocks
Loading: "/media/enzo/B038BD3C38BD0280/GR
Well indeed. I accidentally plugged USB 2.0 cable instead of 3. Thanks.
I realized that "A USB 3.0 cable is required for USB 3.0 speeds"
On Wed, Oct 25, 2017 at 9:08 AM, Bastian Bloessl wrote:
> Hi,
>
> On 10/25/2017 06:13 AM, sumit kumar wrote:
>
>> *Ubuntu 16.04*
>> *GNURadio and gr-ieee-802
Hi,
On 10/25/2017 06:13 AM, sumit kumar wrote:
*Ubuntu 16.04*
*GNURadio and gr-ieee-80211 installed yesterday using pybombs *
I get this warning when I run the wifi_rx.grc
"The total sum of rates (20.00 MSps on 1 channels) exceeds the
maximum capacity of the connection"
Looks like warni
*Ubuntu 16.04*
*GNURadio and gr-ieee-80211 installed yesterday using pybombs *
I get this warning when I run the wifi_rx.grc
"The total sum of rates (20.00 MSps on 1 channels) exceeds the maximum
capacity of the connection"
And then a lot of overflows.
I was generating 802.11g using a VSG.
Hi Stack Programer,
seriously, your mail is sub-standard: Please explain your statements and
ask well-defined questions. I'll try to point out what's wrong here
On 23.05.2017 16:20, Stack Programer wrote:
>
>
> Steps to reproduce
>
> 1.I had a HackRF one TX DVB-T,and a RX-DVBT with hackRF o
Steps to reproduce
1.I had a HackRF one TX DVB-T,and a RX-DVBT with hackRF one, in receive it
sucks .
2.with rtl-sdr and vlc it can received DVB-T signalbut with hackrf
one sucks
Expected behaviour
after some research i guess that oscillator hackrf one is not accurate .it
can should b
Hi,
> Warning: Block key "blocks_ctrlport_monitor_performance" not found when
> loading category tree.
> Warning: Block key "blocks_ctrlport_monitor_performance" not found when
> loading category tree.
They're harmless and just due to the fact you don't have ctrlport
support compiled it, probably
hi all
i am getting warning message while running grc
Warning: Block key "blocks_ctrlport_monitor_performance" not found when
loading category tree.
Warning: Block key "blocks_ctrlport_monitor_performance" not found when
loading category tree.
linux; GNU C++ version 4.7.3; Boost_104900; UHD_003.0
>
>
> Patrik
> - Original Message - From: "Nick Foster"
> To:
> Cc: "Matt Ettus" ; ; <
> discuss-gnuradio@gnu.org>
> Sent: Tuesday, November 08, 2011 1:48
>
> Subject: Re: [Discuss-gnuradio] Warning! Warning!
>
>
> On Mon,
Add 4 more dinosaurs to the list who use those and trad GR ;)
Patrik
- Original Message -
From: "Nick Foster"
To:
Cc: "Matt Ettus" ; ;
Sent: Tuesday, November 08, 2011 1:48
Subject: Re: [Discuss-gnuradio] Warning! Warning!
On Mon, Nov 7, 2011 at 3:38 PM,
with DBSRX and BasicRX.
>> >
>> > Tom
>>
>> I think this is not entirely true:
>>
>> I have a TVRX that is not recognised by the uhd driver...
>>
>> Achilleas
>>
>>
>>
>>
>> ========
&g
Rondeau
> To: Mark Cetilia
> Cc: GNURadio Discussion List
> Subject: Re: [Discuss-gnuradio] Warning! Warning!
> Message-ID:
>
> Content-Type: text/plain; charset="windows-1252"
>
> On Thu, Oct 20, 2011 at 8:58 AM, Mark Cetilia wrote:
>
> > What do
011 09:46:22 -0700
From: Tom Rondeau
To: Mark Cetilia
Cc: GNURadio Discussion List
Subject: Re: [Discuss-gnuradio] Warning! Warning!
Message-ID:
Content-Type: text/plain; charset="windows-1252"
On Thu, Oct 20, 2011 at 8:58 AM, Mark Cetilia wrote:
> What does this mean in ter
Great, thanks for the clarification, Marcus (and Tom)…
Looking forward to the new developments!
Cheers,
Mark
--
mark.cetilia.org | mem1.com | reduxproject.com
On Oct 20, 2011, at 12:01 PM, Marcus D. Leech wrote:
>
> On 20/10/2011 11:58 AM, Mark Cetilia wrote:
>> What does this mean in terms of
On 20/10/2011 11:58 AM, Mark Cetilia wrote:
What does this mean in terms of using older non-UHD-native daughterboards such as
the DBSRX& BasicRX?
To be honest, I haven't checked into the UHD driver, since the daughterboards I
have been working fine without it…
Best,
Mark
UHD supports ALL o
On Thu, Oct 20, 2011 at 8:58 AM, Mark Cetilia wrote:
> What does this mean in terms of using older non-UHD-native daughterboards
> such as the DBSRX & BasicRX?
> To be honest, I haven't checked into the UHD driver, since the
> daughterboards I have been working fine without it…
>
> Best,
> Mark
What does this mean in terms of using older non-UHD-native daughterboards such
as the DBSRX & BasicRX?
To be honest, I haven't checked into the UHD driver, since the daughterboards I
have been working fine without it…
Best,
Mark
--
mark.cetilia.org | mem1.com | reduxproject.com
On Oct 19, 2011
On Thu, Oct 20, 2011 at 5:23 AM, Philip Balister wrote:
> On 10/20/2011 07:57 AM, Rafael Diniz wrote:
> > Morning people,
> > Is there any web interface where we can see the git changes?
>
> http://gnuradio.org/cgit/gnuradio.git/
>
> I find cloning the git repo and using qgit gives a much clearer
On 10/20/2011 07:57 AM, Rafael Diniz wrote:
> Morning people,
> Is there any web interface where we can see the git changes?
http://gnuradio.org/cgit/gnuradio.git/
I find cloning the git repo and using qgit gives a much clearer picture
of how the branches work though.
Philip
>
> Best regards,
Morning people,
Is there any web interface where we can see the git changes?
Best regards,
Rafael Diniz
> We are REMOVING the USRP and USRP2 components from GNU Radio!
>
> It's been mentioned in the past, but the change on the next branch
> is imminent. As of GNU Radio 3.5, we will no longer supp
We are REMOVING the USRP and USRP2 components from GNU Radio!
It's been mentioned in the past, but the change on the next branch
is imminent. As of GNU Radio 3.5, we will no longer support libusrp,
libusrp2 or the GNU Radio interfaces, gr-usrp and gr-usrp2. Everything is
moving to using UHD.
If y
On Mon, Aug 30, 2010 at 8:15 AM, Federico Battaglia
wrote:
> Hi everyone,
> in testing the USRP I came across several warnings. Can someone tell me what
> they mean and if they are irrelevant?
> Thanks in advance who will answer ...
That message usually means you either have an unrecognized
daugh
On Aug 30, 2010, at 8:15 AM, Federico Battaglia wrote:
> in testing the USRP I came across several warnings. Can someone tell me what
> they mean and if they are irrelevant?
[...]
> @ubuntu:/usr/share/gnuradio/examples/usrp$ ./usrp_benchmark_usb.py
> Testing 2MB/sec...
> Warning: Treating daught
Hi everyone,
in testing the USRP I came across several warnings. Can someone tell me what
they mean and if they are irrelevant?
Thanks in advance who will answer ...
-
Federico Battaglia
@ubuntu:/usr/share/gnuradio/examples/usrp$ ./usrp_benchmark_usb.py
Testing 2MB/sec...
Warning: Treating daug
Hi,I use file sink in GRC and Random Source,and want to see the data with
read_short_binary.m in Octave, but it appears like this:octave:10>
a1=read_short_binary('a.dat',1e5)
warning: broken pipe -- some output may be lost.
So what's wrong?
Thank you.
Brooke
__
On Thu, Dec 4, 2008 at 2:47 AM, Halil Yigit <[EMAIL PROTECTED]> wrote:
gr_fir_fff: using SSE
> warning : failed to enable realtime scheduling
Some GNU Radio applications are written to try to set the process
scheduling priority to realtime in order to obtain the best possible
performance. Ho
Hi, i run usr/local/share/gnuradio/examples/digitals$./benchmark_tx.py --freq=2.4G this give warning following: >>>gr_fir_fff: using SSEwarning : failed to enable realtime scheduling what is the problem? Regards
___
Discuss-gnuradio mailing list
Disc
Hi, i run usr/local/share/gnuradio/examples/digitals$./benchmark_tx.py --freq=2.4G this give warning following: >>>gr_fir_fff: using SSEwarning : failed to enable realtime scheduling.. what is the problem? Regards
_
In case anyone's having mail trouble, note that the gnu.org mx is
acting odd, which doesn't give me a warm fuzzy that it won't do
further odd things. Greylisting is one thing, and I can certainly
understand that, but I don't know how they think my NetBSD box running
postfix is windows. I haven't
On Sat, Jan 27, 2007 at 04:29:42PM +0100, Davide Anastasia wrote:
> Hi Gnuradio List,
> I'm compiling GNU Radio on Ubuntu 6.06. I receive this warning:
>
> ../../../../gnuradio-core/src/lib/io/gr_udp_sink.cc: In member function
> 'bool gr_udp_sink::open()':
> ../../../../gnuradio-core/src/lib/io/g
Hi Gnuradio List,
I'm compiling GNU Radio on Ubuntu 6.06. I receive this warning:
../../../../gnuradio-core/src/lib/io/gr_udp_sink.cc: In member function
'bool gr_udp_sink::open()':
../../../../gnuradio-core/src/lib/io/gr_udp_sink.cc:88: warning: NULL
used in arithmetic
../../../../gnuradio-core/s
32 matches
Mail list logo
