Am 27.07.2010 18:06, schrieb Matt Ettus:
On 07/27/2010 08:38 AM, Tobias Schmid wrote:
Hello,
it's me for the third time.
I decided to try working with the uhd. I followed the instructions on
http://www.ettus.com/uhd_docs/manual/html/usrp2.html ,
but when the usrp2_card_burner(_gui).py finishe
On 07/27/2010 08:38 AM, Tobias Schmid wrote:
Hello,
it's me for the third time.
I decided to try working with the uhd. I followed the instructions on
http://www.ettus.com/uhd_docs/manual/html/usrp2.html ,
but when the usrp2_card_burner(_gui).py finished it's work, I get the following
messages
me, but I didn't find anything helping
me.
So I would be very thankful getting an answer.
Tobias
-Ursprüngliche Nachricht-
Von: Tobias Schmid
Gesendet: 27.07.2010 14:54:20
An: discuss-gnuradio@gnu.org
Betreff: Re: [Discuss-gnuradio] Update the USRP2
>Hello again,
>
>that was m
Hello again,
that was my mistake. My network devices have been installed with
different names by the System. The network card I connected my USRP2 to,
was names eth1. So I had to change the default settings of the gr_usrp2
block. So my code workes fine.
But the other question remains:
Would
Hello,
I've got another short question.Up til now, I used the 3.2.2 release of
Gnuradio, but now I've updates it to the latest git version 3.3.1.
I wanted to check if my already written code still works, but I didn't even
recognize my USRP2. So my question is, do I have to update my USRP2 firmwa
Hello,
I've got another short question.Up til now, I used the 3.2.2 release of
Gnuradio, but now I've updates it to the latest git version 3.3.1.
I wanted to check if my already written code still works, but I didn't even
recognize my USRP2. So my question is, do I have to update my USRP2 firmwa
