On Wed, Aug 04, 2010 at 02:05:18PM +0200, Moeller wrote:
>
> Btw, the current git sources of gnuradio are defective too
> with the current gcc 4.5.0 compiler. I had to change the sources.
> I will provide a patch for that later.
>
> Moeller
Looking forward to your patch. Basing it on the maint
On 03.08.2010 23:39, Marc Epard wrote:
>> did anybody manage to get this combination working together?
> Yes, after updating the EEPROM (using the USRP2 firmware) and moving the
> resister, this combination is working fine for us.
>
> OS: Ubuntu 10.04
> GNU Radio: 3.0.3
> FPGA: u2_rev3-2010060
On Aug 3, 2010, at 4:15 PM, Moeller wrote:
> did anybody manage to get this combination working together?
Yes, after updating the EEPROM (using the USRP2 firmware) and moving the
resister, this combination is working fine for us.
OS: Ubuntu 10.04
GNU Radio: 3.0.3
FPGA: u2_rev3-20100603.bin
F
Hi,
did anybody manage to get this combination working together?
Some say on this list, you need an USRP1 for programming the DBSRX
and that programming on the USRP2 would not work.
The instructions on the website tell us, the USRP2 needs the special
burning firmware to make this upgrade. Really
I burned DBSRX usrp2 firmware image (burn_dbsrx_eeprom.bin) as suggested,
but then only F LED turned on and find_usrps command says: No USRP2 found
which was not the case initially.
Then I burned UHD firmware and UHD fpga image from (
http://code.ettus.com/redmine/ettus/projects/public/wiki/U2bina
I am running DBSRX on USRP2.
I have followed the wiki -- Remove R193 and put it on 194.
But I have not burned the firmware `burn_dbsrx_eeprom.bin' as I cannot find
from where. I did find: (root / usrp2 / firmware / apps /
burn_dbsrx_eeprom.c)but when I try to compile it, I get error. Can someo
Hi,
On Jul 14, 2010, at 12:57 PM, Amee Shah wrote:
> But I have not burned the firmware `burn_dbsrx_eeprom.bin' as I cannot find
> from where. I did find:
> (root / usrp2 / firmware / apps / burn_dbsrx_eeprom.c)
>
You can find some firmware images here:
http://code.ettus.com/redmine/ettus/proj
Hi all,
I am running DBSRX on USRP2.
I have followed the wiki -- Remove R193 and put it on 194.
But I have not burned the firmware `burn_dbsrx_eeprom.bin' as I cannot find
from where. I did find: (root / usrp2 / firmware / apps /
burn_dbsrx_eeprom.c)but when I try to compile it, I get error. Can
Thanks for the fast reply
Gabriele
Jason Abele wrote:
>
> On Mon, May 24, 2010 at 6:09 AM, gabriele pirazzi
> wrote:
>>
>> Anyone can clarify this issue:
>> to correct configure the DBSRX for USRP2 is requested the USRP1 or
>> following
>> the instruction in
>> http://gnuradio.org/redmine/wik
On Mon, May 24, 2010 at 6:09 AM, gabriele pirazzi
wrote:
>
> Anyone can clarify this issue:
> to correct configure the DBSRX for USRP2 is requested the USRP1 or following
> the instruction in
> http://gnuradio.org/redmine/wiki/gnuradio/USRP2DBSRXModification in
> sufficient?
yes, if you want to u
Hi,
i think this is very important.
Anyone can clarify this issue:
to correct configure the DBSRX for USRP2 is requested the USRP1 or following
the instruction in
http://gnuradio.org/redmine/wiki/gnuradio/USRP2DBSRXModification in
sufficient?
Thanks
Gabriele
--
View this message in context:
Ahmad Zaki Yaacob schrieb:
Hi all,
I am running DBSRX on USRP2. My laptop is Dell Vostro 1510, Intel
Core2 Duo 2.4GHz, 2GB Ram. Ubuntu 9.10 version 2.6.31-20. My installed
Gnuradio is version 3.2.2-1. Previously I have been able to use
BasicRX and able to listen to FM radio.
Currently I'm worki
Hi all,
I am running DBSRX on USRP2. My laptop is Dell Vostro 1510, Intel
Core2 Duo 2.4GHz, 2GB Ram. Ubuntu 9.10 version 2.6.31-20. My installed
Gnuradio is version 3.2.2-1. Previously I have been able to use
BasicRX and able to listen to FM radio.
Currently I'm working on DBSRX. I have followed
On Tue, Jul 28, 2009 at 11:49, Kelley, Clifford
W wrote:
> burn-db-eeprom -A --force -t dbsrx2
I think it is 'dbsrx_clkmod', not 'dbsrx2':
http://gnuradio.org/trac/browser/gnuradio/trunk/usrp/host/apps/burn-db-eeprom
Johnathan
___
Discuss-gnu
Matt,
I saw your message about modifying the DBSRX to work with the USRP2 and
just wanted to confirm and ask a couple of other questions.
The two steps are:
1. Put the DBSRX into a USRP1 on Side A, connect to a computer and run:
burn-db-eeprom -A --force -t dbsrx2
2. Remove R193 (on t
15 matches
Mail list logo
