Hi,
Thank you. Tx/Rx on the old Flex2400 using the usrp2 is now working.
On 01/09/2010 21:41, Jason Abele wrote:
On Wed, Sep 01, 2010 at 03:08:53PM -0400, Marcus D. Leech wrote:
On 09/01/2010 12:51 PM, Jason Abele wrote:
I'll need to do some re-soldering and burn-db-eeprom with USR
On Wed, Sep 01, 2010 at 03:08:53PM -0400, Marcus D. Leech wrote:
> On 09/01/2010 12:51 PM, Jason Abele wrote:
> >>I'll need to do some re-soldering and burn-db-eeprom with USRP1 and
> >>hopefully this
> >>should fix the problem:
> >>http://gnuradio.org/redmine/wiki/1/USRPClockingNotes
> >Also, sin
On 09/01/2010 12:51 PM, Jason Abele wrote:
I'll need to do some re-soldering and burn-db-eeprom with USRP1 and hopefully
this
should fix the problem:
http://gnuradio.org/redmine/wiki/1/USRPClockingNotes
Also, since you use UHD, you can change the daughterboard ID of a
daughterboard on a U
> I'll need to do some re-soldering and burn-db-eeprom with USRP1 and hopefully
> this
> should fix the problem:
> http://gnuradio.org/redmine/wiki/1/USRPClockingNotes
Also, since you use UHD, you can change the daughterboard ID of a
daughterboard on a USRP2 from your host PC using:
/share/uhd/u
You are using a very old RFX2400 which is configured with its own
onboard oscillators instead of using the master oscillator from the
motherboard. You can reconfigure it to work with USRP2 by following the
directions under "Synchronizing all daughterboard LOs" here:
http://gnuradio.org/redm
Hi Marcus,
I get exactly the same behaviour. I have finally traced the problem to
an old Flex2400 using an internal clock rather than the usrp2 clock.
I'll need to do some re-soldering and burn-db-eeprom with USRP1 and
hopefully this should fix the problem:
http://gnuradio.org/redmine/wiki/1/
On 08/31/2010 01:48 PM, Joseph Wamicha wrote:
Hi Leech,
Thank you for your response. I'm using 2.4 GHz characterized antennas.
No I'm not feeding the signal directly into the USRP2. I have a 2.4GHz
resonant monopole antenna on the signal generator and another 2,
2.4GHz resonant antennas on bo
The RFX2400 is dated 2/6/2006.
On 01/09/2010 02:37, Joseph Wamicha wrote:
Hi,
- I'm now using the uhd firmware and fpga code (txrx_uhd_20100706.bin
and u2_rev3_uhd_20100706.bin images).
- I get some interesting results; when running the examples, it
appears that the daughterboard can not be
Hi,
- I'm now using the uhd firmware and fpga code (txrx_uhd_20100706.bin
and u2_rev3_uhd_20100706.bin images).
- I get some interesting results; when running the examples, it appears
that the daughterboard can not be recognized and is unknown.
- I'm not sure if this in any way will affect
Hi,
We are currently experiencing Transmit and possibly Receive problems
with the USRP2-Flex2400 boards.
- The USRP2 is detected:
# find_usrps -e eth0
00:50:c2:85:32:73 hw_rev = 0x0400
- The latest firmware and Raw Ethernet FPGA images have been written
onto the SDRAM: u2_rev3-20100603.bin,
10 matches
Mail list logo
