2007 7:27 PM
To: Weber, Michael J. (US SSA)
Cc: gnuradio mailing list
Subject: Re: [Discuss-gnuradio] USRP 4 Questions
Weber, Michael J. (US SSA) wrote:
> Eric, I also recently received some enclosures... this is my two
> cents, YMMV, etc:
>
> If the fan is installed such that it blow
Weber, Michael J. (US SSA) wrote:
> Eric, I also recently received some enclosures... this is my two cents,
> YMMV, etc:
>
> If the fan is installed such that it blows in onto the USRP, it will
> receive the direct benefit of the airflow. However, the fan makes a lot
> of noise in this configurati
way.
Good luck,
Mike
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Eric A. Cottrell
Sent: Monday, February 12, 2007 10:56 PM
To: gnuradio mailing list
Subject: [Discuss-gnuradio] USRP 4 Questions
Hello,
I managed to blow the smd fuse on my USRP. It see
Johnathan Corgan wrote:
> Part number P13572CT-ND is an equivalent part from Panasonic-ECG:
>
> http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail?Ref=2291&Row=652434
Wrong way to link and wrong part anyway (it's a 4A, not 3A.)
P11376CT-ND is the 3A equivalent:
http://www.digikey.com/scr
Roshan Baliga wrote:
> If you're talking about F501 (next to the 6V input), the BOM lists it as
> a 3A 0603 part. Digikey part # P11359-CT-10 (though it doesn't seem to
> show up in the current digikey catalog).
It's under P11359CT-ND, but it shows out of stock right now.
Part number P13572CT-ND
Roshan Baliga wrote:
> Hello,
>
> If you're talking about F501 (next to the 6V input), the BOM lists it
> as a 3A 0603 part. Digikey part # P11359-CT-10 (though it doesn't seem
> to show up in the current digikey catalog).
Yes, it is a 3A part which was discontinued. Any 3-4A fuse would be
fine.
Hello,
If you're talking about F501 (next to the 6V input), the BOM lists it as
a 3A 0603 part. Digikey part # P11359-CT-10 (though it doesn't seem to
show up in the current digikey catalog).
-Roshan
Eric A. Cottrell wrote:
Hello,
I managed to blow the smd fuse on my USRP. It seems to be
Hello,
I managed to blow the smd fuse on my USRP. It seems to be a 1 Amp 603
fuse. Is there a certain one I need to buy? I would like to order one
from Mouser.
I got the enclosure recently. Where do I plug the fan in? Should the
fan exhaust the air from the enclosure?
73 Eric.
___
