Re: [Discuss-gnuradio] Re ceiving DBPSK side not working.

2011-04-21 Thread ish13
No I am using TVRX to receive and basic TX to transmit. I have changed the following values, Receive. Decimation=256 gain = 20 Transmitter. Interpolation= 512 Multiply Const=5000 I am now receiving my audio file and saving the data into another file. Though the data is not the just the file da

Re: [Discuss-gnuradio] Re ceiving DBPSK side not working.

2011-04-21 Thread Tom Rondeau
On Thu, Apr 21, 2011 at 2:14 PM, ish13 wrote: > > Am going to work on it today and see if I get any results from the previous > replys. Below the setting that are currently being used but I am changing > the interpolation and decimation rates. > > 4k. > Gain=20. > Freq= 100.1MHz > Board is tvrx >

Re: [Discuss-gnuradio] Re ceiving DBPSK side not working.

2011-04-21 Thread ish13
Am going to work on it today and see if I get any results from the previous replys. Below the setting that are currently being used but I am changing the interpolation and decimation rates. 4k. Gain=20. Freq= 100.1MHz Board is tvrx Version 3.3 gnuradio and 0.7 grc Ismael Tom Rondeau wrote:

Re: [Discuss-gnuradio] Re ceiving DBPSK side not working.

2011-04-21 Thread Tom Rondeau
On Tue, Apr 19, 2011 at 2:35 PM, ish13 wrote: > > Ok I had used the muliplier in a previous code using Frequency Modulation > which is why I used it again. But thanks for that. I will change it to a > smaller value. > > I also had it set up with the interpolation to 512 and the decimation to >

Re: [Discuss-gnuradio] Re ceiving DBPSK side not working.

2011-04-19 Thread ish13
Ok I had used the muliplier in a previous code using Frequency Modulation which is why I used it again. But thanks for that. I will change it to a smaller value. I also had it set up with the interpolation to 512 and the decimation to 256 but it didn't work either. Though I will set these va

Re: [Discuss-gnuradio] Re ceiving DBPSK side not working.

2011-04-19 Thread Tom Rondeau
On Tue, Apr 19, 2011 at 2:03 PM, ish13 wrote: > > I am using DBPSK, but I am not receiving anything when I transmit my > signal. > I attached the flow-graphs from the companion. Can someone look through it > and tell me if it is correct? > > Thanks > Ismael > > http://old.nabble.com/file/p314349

[Discuss-gnuradio] Re ceiving DBPSK side not working.

2011-04-19 Thread ish13
I am using DBPSK, but I am not receiving anything when I transmit my signal. I attached the flow-graphs from the companion. Can someone look through it and tell me if it is correct? Thanks Ismael http://old.nabble.com/file/p31434999/Receiver.png Receiver.png http://old.nabble.com/file/p314349