This means that UHD was not installed correctly.
If running the following doesn't find anything then hunt down and remove
any ghost version of UHD that makes Pybombs think that it is installed and
then reinstall it using pybombs:
sudo find / -name uhd_usrp_source.xml
Mike
--
Mike Jameson M0MIK
On Wed, May 21, 2014 at 7:31 PM, Mike Jameson wrote:
> The "UHD Source" GRC block uses the file called "uhd_usrp_source.xml".
> Make sure that this is in your GRC path.
>
> To set the GRC path you need to go into the ~/.gnuradio folder and create
> a config.conf file and add the following tweaked
The "UHD Source" GRC block uses the file called "uhd_usrp_source.xml".
Make sure that this is in your GRC path.
To set the GRC path you need to go into the ~/.gnuradio folder and create a
config.conf file and add the following tweaked with your actual path to the
"UHD source" block:
[grc]
global_
On Wed, May 21, 2014 at 4:35 PM, Mike Jameson wrote:
> Have you run:
>
> ./pybombs env
>
> ...and then run:
>
> source ../target/setup_env.sh (alter file path to taste)
>
> Mike
>
Yes, this has been performed.
During gnuradio installation, I configured the prefix to /usr/local due to
a reason me
Have you run:
./pybombs env
...and then run:
source ../target/setup_env.sh (alter file path to taste)
Mike
--
Mike Jameson M0MIK BSc MIET
Ettus Research Technical Support
Email: supp...@ettus.com
Web: http://ettus.com
On Wed, May 21, 2014 at 8:38 AM, Activecat wrote:
> After installing gnu
After installing gnuradio using PyBOMBS, the USRP Sink and Source blocks
are unavailable.
Below is the message:
1). To verify uhd has been installed:
[03:25pm] activecat@rs: ~/download/gnuradio/pybombs $ ./pybombs install
uhd
Settled on prefix: /usr/local
Initializing environmental v
