On Thu, Jan 28, 2010 at 2:09 PM, Eric Blossom wrote:
> usrp2 is the directory for the second architectural rev of the USRP1
> (Note that when these directories were created, the USRP2 was years
> in the future.) Sorry for any confusion this may have caused.
Thanks for the clarification!
> The US
On Thu, Jan 28, 2010 at 11:33:55AM -0500, Catalin Patulea wrote:
> Under usrp/firmware/src I see a directory called "usrp2". This is the
> Cypress firmware for USRP2? (while usrp2/firmware is firmware for the
> microblaze?)
Long, long ago, there was a prototype for the USRP, and that ran code
that
Under usrp/firmware/src I see a directory called "usrp2". This is the
Cypress firmware for USRP2? (while usrp2/firmware is firmware for the
microblaze?)
Is the Cypress USRP1 firmware still kicking around anywhere?
On Wed, Jan 27, 2010 at 2:27 PM, Johnathan Corgan
wrote:
> On Wed, Jan 27, 2010 at
On Wed, Jan 27, 2010 at 11:21, Catalin Patulea wrote:
> One more question: what is the difference between the various u2_revX?
They are various hardware revisions; the current shipping hardware us
u2_rev3. The vast majority of the FPGA code shared among them.
Johnathan
__
On Wed, Jan 27, 2010 at 1:32 PM, Johnathan Corgan
wrote:
> For now, yes. We haven't yet made a formal announcement, but the FPGA
> code for both the USRP1 and USRP2 will be moved over to a repository
> managed by Ettus Research.
Okay, thanks.
One more question: what is the difference between the
On Wed, Jan 27, 2010 at 10:28, Catalin Patulea wrote:
> I have only one question at this point: is the Git repo (under the
> usrp2 directory) the main place where development happens for the
> USRP2? Any other repos I should look at/keep an eye on?
For now, yes. We haven't yet made a formal ann
Hi everyone,
I'm working with ThinkRF (www.thinkrf.com) to implement a GNU Radio
backend for their "WSA1000E Remote RF Digitizer" product
(http://www.thinkrf.com/wsa1000e.html). Their product is (internally)
very similar to the USRP devices, but it is RX only. In particular,
there is an FPGA for p
Hi everyone,
I'm working with ThinkRF (www.thinkrf.com) to implement a GNU Radio
backend for their "WSA1000E Remote RF Digitizer" product
(http://www.thinkrf.com/wsa1000e.html). Their product is (internally)
very similar to the USRP devices, but it is RX only. In particular,
there is an FPGA for p
