SRP until you get exactly the same
> value found in step-b
>
>
> 3) I appolagize about my previous post so many spelling errors!.
>
>
> Regards to all,
>
> Firas
>
>
> --- On Thu, 7/24/08, kaleem ahmad <[EMAIL PROTECTED]> wrote:
> From: kaleem ahm
AIL PROTECTED]> wrote:
From: kaleem ahmad <[EMAIL PROTECTED]>
Subject: Re: [Discuss-gnuradio] FSK with RFX2400
To: Discuss-gnuradio@gnu.org
Date: Thursday, July 24, 2008, 5:07 PM
Hi,
Can some one explain in a little bit detail about where is the clock or
oscillator (on daughter board
rors is still there, then you have to search for another reason.
>
> Regards,
>
> Firas
>
>
>
> --- On Wed, 7/23/08, kaleem ahmad <[EMAIL PROTECTED]> wrote:
> From: kaleem ahmad <[EMAIL PROTECTED]>
> Subject: Re: [Discuss-gnuradio] FSK with RFX2400
> To: Dis
h for another reason.
Regards,
Firas
--- On Wed, 7/23/08, kaleem ahmad <[EMAIL PROTECTED]> wrote:
From: kaleem ahmad <[EMAIL PROTECTED]>
Subject: Re: [Discuss-gnuradio] FSK with RFX2400
To: Discuss-gnuradio@gnu.org
Date: Wednesday, July 23, 2008, 5:23 PM
I have just provided the informa
I have just provided the information which can be helpful for you, and the
code is also attached with it and a sample received file is also there along
with actual sent file.
Please just scroll up and you will find my message with all this
information. Additionally OS is 'openSUSI' a favour of Li
Hi,
You can find attached the code for transmit and receive sides, and the file
which I am sending (send.txt) and one which I am receiving (rcv.txt). You
can see that nearly 80%-90% received data is corrupt. I am receiving around
50dBm at receiver antenna, and I have tried with both stations at l
Quoting kaleem ahmad <[EMAIL PROTECTED]>:
>
> Dear All,
>
> Can anyone also address the first part of my question aslo, I mean how to
> improve the quality of received data. I mean is it normal with GNU
> Radio/USRP that we receive so currupt data or I am doing something wrong.
> Any suggestion pl
Dear All,
Can anyone also address the first part of my question aslo, I mean how to
improve the quality of received data. I mean is it normal with GNU
Radio/USRP that we receive so currupt data or I am doing something wrong.
Any suggestion please...
Thanks
Matt Ettus wrote:
Jonathan Friedman wrote:
Secondally how can I remove the ISM bandpass filter which is by default
there with RFX2400.
You have to de-solder it. Optionally (in case you don't want to remove
the part, since it will be difficult to reinstall it), you could
install a jumper (zero-ohm resistor)
> Secondally how can I remove the ISM bandpass filter which is by default
> there with RFX2400.
You have to de-solder it. Optionally (in case you don't want to remove
the part, since it will be difficult to reinstall it), you could
install a jumper (zero-ohm resistor) or (better) a small 10pF
capa
Hi everyone,
I am trying to implement simple FSK system with USRP and I am using two
USRP's each with one RFX2400 daughter card. I have tried fsx_tx.py and
fsk_rx.py which are available in gnuradio_examples folder. after using tune
to set the proper ferquency I was able to run transmitter and rec
11 matches
Mail list logo
