ah...@hotmail.com<mailto:ayazmah...@hotmail.com>;
mle...@ripnet.com<mailto:mle...@ripnet.com>
Subject: Re: [Discuss-gnuradio] Enable/Disable TX ports in B210 in 2x2 setup
The Selector block comes from the "deprecated" category, and that for good
reason: Don't use it, it ca
>
> Ayaz
>
>
> From: Ayaz Mahmud
>
> Sent: Tuesday, July 17, 2018 4:39 PM
>
> To: Marcus D. Leech;
> "Müller, Marcus (CEL)"; discuss-gnuradio@gnu.org
>
> Subject: Re: [Discuss-gnuradio] Enable/Disable TX ports in B210 in 2x2 setup
>
>
Marcus D. Leech<mailto:mle...@ripnet.com>; "Müller, Marcus
(CEL)"<mailto:muel...@kit.edu>;
discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org>
Subject: Re: [Discuss-gnuradio] Enable/Disable TX ports in B210 in 2x2 setup
Hi Marcus,
The situation still is same
PM
To: Ayaz Mahmud<mailto:ayazmah...@hotmail.com>; "Müller, Marcus
(CEL)"<mailto:muel...@kit.edu>;
discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org>
Subject: Re: [Discuss-gnuradio] Enable/Disable TX ports in B210 in 2x2 setup
On 07/16/2018 02:05 PM, Ayaz Mahm
uly 14, 2018 8:15 PM
*To: *Ayaz Mahmud <mailto:ayazmah...@hotmail.com>; "Müller, Marcus
(CEL)" <mailto:muel...@kit.edu>; discuss-gnuradio@gnu.org
<mailto:discuss-gnuradio@gnu.org>
*Subject: *Re: [Discuss-gnuradio] Enable/Disable TX ports in B210 in
2x2 setup
On 07/1
PM
To: Ayaz Mahmud<mailto:ayazmah...@hotmail.com>; "Müller, Marcus
(CEL)"<mailto:muel...@kit.edu>;
discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org>
Subject: Re: [Discuss-gnuradio] Enable/Disable TX ports in B210 in 2x2 setup
On 07/14/2018 06:40 PM, Ayaz Mahmud
On 07/14/2018 06:40 PM, Ayaz Mahmud wrote:
Hi Muller / Marcus,
I got the testing right now, but unfortunately it doesn’t work while I
put it in my original file.
Here is the attached .grc where I have used vector source as input and
multiply a period with 1 and then with zeros on one radio
nu.org>;
mle...@ripnet.com<mailto:mle...@ripnet.com>;
ayazmah...@hotmail.com<mailto:ayazmah...@hotmail.com>
Subject: Re: [Discuss-gnuradio] Enable/Disable TX ports in B210 in 2x2 setup
Hey Marcus,
yep, good catch: 64 kHz is far too low a sampling rate; Ayaz, start
with something like
Hey Marcus,
yep, good catch: 64 kHz is far too low a sampling rate; Ayaz, start
with something like 1 MS/s. (also, what kind of CSI will you be getting
when observing a 64 kHz wide channel?
Are you looking for reflections that have a path length difference
larger than (sandy gears turning in my he
On 07/13/2018 01:08 PM, Ayaz Mahmud wrote:
Hi Marcus,
Here the .grc file. You might have to change the File Source (tx) &
destination folder(rx)
Ayaz
I get that you want to alternate "active" antennae, and there are
On 07/13/2018 12:35 PM, Ayaz Mahmud wrote:
Hi All,
So my ultimate goal is to get the CSI (Channel State Information)
between 2 Tx antenna (1^st B210) and 2 Rx antenna(2^nd B210). So that
each antenna at Rx will have 2 CSI measurement.
Attached is my picture of the flowgraph.
To build this
11 matches
Mail list logo
