Hi Eric. Yes it seems that the problem is that my oscilloscope just ain't
fast enough! I've spoken to some of our engineering guys here and they
concur.
However I have another related question now. As I've said, I just want to
get the IQ outputs from the FPGA onto the pins. Now I see that the USB
On Wed, Sep 27, 2006 at 04:28:08PM +0100, Andrew Borg wrote:
> Hi Eric. Thanks for your help. It all works exactly how you said. I was
> enabling the correct pins using "usrp.source_c(0, 64)" - the code I
> pasted "usrp.sink_c(0, 64)" was a blind copy-paste from Oussama's email.
> Sorry about
age -
From: "Eric Blossom" <[EMAIL PROTECTED]>
To: "Andrew Borg" <[EMAIL PROTECTED]>
Cc:
Sent: Tuesday, September 26, 2006 5:35 PM
Subject: Re: [Discuss-gnuradio] Daughter board pins
> On Tue, Sep 26, 2006 at 03:15:16PM +0100, Andrew Borg wrote:
>
>&
be greatly appreciated as I'm hitting a bit of a wall now.
Thanks a lot for the already received help.
Andrew
- Original Message -
From: "Eric Blossom" <[EMAIL PROTECTED]>
To: "Andrew Borg" <[EMAIL PROTECTED]>
Cc:
Sent: Tuesday, September 26, 2006
On Tue, Sep 26, 2006 at 03:15:16PM +0100, Andrew Borg wrote:
> Hi Oussama. I managed to get the signals I want out of my daughter
> board (BasicRX) on RxA. So thanks a lot for your help (and by proxy
> to Eric too!). However, I have one more problem. I need to get some
> other signals out from the
M
Subject: Re: [Discuss-gnuradio] Daughter
board pins
On 9/21/06, Andrew Borg <[EMAIL PROTECTED]> wrote:
Hi Oussama.
Thanks for this. It's exactly what I needed :)
Unfortunately I cannot test it out just yet. In probing with my
oscilloscope, I blew the s
Andrew Borg wrote:
Hi. I'm trying to do some FPGA development on the USRP and would like
some information if anyone has it readily available.
I'd like to capture the output from the board (same data that goes to
the USB) from a daughterboard. I understand that I can do this by
using the pins
Hi. I'm trying to do some FPGA development on the
USRP and would like some information if anyone has it readily available.
I'd like to capture the output from the board (same
data that goes to the USB) from a daughterboard. I understand that I can do
this by using the pins on the BasicRX
