A bit late here, but the X300 can now (at least on master) also do all the
other clock rates in between 184.32 and 200 Msps.
On Tue, Aug 6, 2019 at 11:56 AM Derek Kozel wrote:
> Hi Paul,
>
> What rate do you want to adjust it to and for what purpose? The X300
> supports a master clock rate of 20
> Engineering Technician IV
>> paul.mitch...@testllc.com
>> 256.716.9056 (Work)
>> 256.289.3581 (Cell)
>>
>> From: Marcus Müller
>> Sent: Wednesday, August 7, 2019 9:27 AM
>> To: Mitchell, Paul; Derek Kozel; discuss-gnuradio@gnu.org
>> Cc: usrp-use
n IV
> paul.mitch...@testllc.com
> 256.716.9056 (Work)
> 256.289.3581 (Cell)
>
> From: Marcus Müller
> Sent: Wednesday, August 7, 2019 9:27 AM
> To: Mitchell, Paul; Derek Kozel; discuss-gnuradio@gnu.org
> Cc: usrp-users
> Subject: Re: [Discuss-gnuradio] Clock rate change on x30
IV
> paul.mitch...@testllc.com
> 256.716.9056 (Work)
> 256.289.3581 (Cell)
>
> From: Derek Kozel
> Sent: Tuesday, August 6, 2019 1:56 PM
> To: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio] Clock rate change on x300
>
> Hi Paul,
>
> What rate do you want t
gt; 256.289.3581 (Cell)
>
> From: Derek Kozel
> Sent: Tuesday, August 6, 2019 1:56 PM
> To: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio] Clock rate change on x300
>
> Hi Paul,
>
> What rate do you want to adjust it to and for what purpose? The X300
> sup
...@testllc.com<mailto:paul.mitch...@testllc.com>
256.716.9056 (Work)
256.289.3581 (Cell)
From: Derek Kozel<mailto:de...@bitstovolts.com>
Sent: Tuesday, August 6, 2019 1:56 PM
To: discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org>
Subject: Re: [Discuss-gnuradio] Clock r
Hi Paul,
What rate do you want to adjust it to and for what purpose? The X300
supports a master clock rate of 200 MS/s and 184.32 MS/s. The built in
DSP can convert to an integer divisor sample rate of one of those two.
Adding support for another rate would require either a lot of software
work or
I need to adjust the clock rate on a USRP x300. Is there a simple way to do
this or do I need to use Vivado to access the FPGA image somehow? I am using
Linux for everything.
Paul Mitchell
Engineering Technician IV
paul.mitch...@testllc.com
256.716.9056 (Work)
256.289.3581 (Cell)
__
