Hello people,
I'm following the discussion about the Soft-DVB, and I'm thinking about use of
the WBX0510 daughterboard (50 MHz to 1 GHz) w/ Soft-DVB - Will then be
possible to transmitt in any VHF/UHF channel?
Bye,
Rafael Diniz
Em Tuesday 11 November 2008, Vincenzo Pellegrini escreveu:
> Martin
2008 at 8:18 PM, rafael2k <[EMAIL PROTECTED]> wrote:
> > That one is nice. but the price is not that good, and the software runs
> > on Windows... (of course we could write the driver to gnuradio).
> > btw, back to our ursp/gnuradio, a friend that works w/ RF will try to
&g
That one is nice. but the price is not that good, and the software runs on
Windows... (of course we could write the driver to gnuradio).
btw, back to our ursp/gnuradio, a friend that works w/ RF will try to design a
board that conects to the LFTX w/ the stuff needed to transmit SSB and so on.
If
thats true Chris,
Thanks for the information.
but none runs gnuradio, usually PowerSDR is used.
bye,
rafael diniz
Em Monday 27 October 2008, Chris Albertson escreveu:
> On Mon, Oct 27, 2008 at 8:36 PM, rafael2k <[EMAIL PROTECTED]> wrote:
> > There are others SDR radios out there
ected to the PC soundcard as interface (at most 96kHZ and 20kHz
bandwidth), ..., ursp is much more powerfull.
bye,
Rafael Diniz
Em Monday 27 October 2008, Johnathan Corgan escreveu:
> On Sun, Oct 26, 2008 at 9:08 PM, rafael2k <[EMAIL PROTECTED]> wrote:
> > I'd like to know t
Hello people,
I'm aiming to transmitt in some amateur radio bands, especially the 40m band.
The bands that LFRX and LFTX can cover are (considering the 30MHz lowpass
filter):
1.8, 3.5, 5, 7, 10.1, 14, 21, 24.89, 28 MHz
I know gnuradio can do SSB and CW modulation :)
I'd like to know the output po
Hi Vince,
Are you transmitting DVB w/ it?
I'm in the hope to transmitt ISDB-T :)
Bye,
Rafael Diniz
Em Tuesday 05 August 2008, Vincenzo Pellegrini escreveu:
> I was planning to edit the RFX900 wiki page like this, as promised in my
> previous email requiring info RFX900 gain
> I thought to submit
Hi,
I'd like to know if there is some other source of .py (for ursp especially)
than the official svn.
Sometimes I see people discussing about some .py I don't have.
Thanks a lot,
Rafael Diniz
--
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Ciência da Comput
Hi all,
I'm using gnuradio to receive and transmit to 2 meters amateur radio, and when
I went to buy the cable, I didn't know what impedance should I use w/ the
usrp. 50 ohm or 75 ohm?
Can I connect an amplifier to the basic-tx without any problem?
thanks
rafael diniz
--
+-+-+-+-+-+-+-+-+-+-+-
Em Thursday 08 May 2008, Steve Totaro escreveu:
> On Thu, May 8, 2008 at 2:10 PM, Roshan Baliga <[EMAIL PROTECTED]> wrote:
> > Zhenghao Zhang wrote:
> > > I am new to GNU radio and I was wondering which version of Linux you
> > > use. Is it SuSE or Fedora? I just want to know which is the most
> >
two days) there will also be a video of the presentation in
> Karlsruhe (including a live Soft-DVB demonstration) here:
>
> www.legalepellegrini.it/Soft-DVB-Karlsruhe.mp4
>
> 2008/5/6 rafael2k <[EMAIL PROTECTED]>:
> > Hi all,
> > Can anyone make available t
Hi all,
Can anyone make available the OFDM / DAB implementation by Jens Elsner, which
original location was:
- http://www.1c3.de/gr-dab.tar.bz2
There is also a paper called:
- V. Pellegrini, G. Bacci, M. Luise, "Soft-DVB, a Fully Software, GNURadio
Based ETSI DVB-T Modulator", in Proc. WSR'08
if it's interesting for anyone,
We, at slack.sarava.org did SlackBuilds for gnuradio and grc for Slackware
(along w/ it's dependencies):
http://slack.sarava.org/slackbuilds/media/radio/
bye,
rafael diniz
Em Sunday 04 May 2008, Steve Totaro escreveu:
> On Sun, May 4, 2008 at 11:15 AM, Eric Bloss
13 matches
Mail list logo
