Hi,
Thank you. Tx/Rx on the old Flex2400 using the usrp2 is now working.
On 01/09/2010 21:41, Jason Abele wrote:
On Wed, Sep 01, 2010 at 03:08:53PM -0400, Marcus D. Leech wrote:
On 09/01/2010 12:51 PM, Jason Abele wrote:
I'll need to do some re-soldering and burn-db-eeprom with USR
iki/1/USRPClockingNotes
On 01/09/2010 03:20, Marcus D. Leech wrote:
On 08/31/2010 01:48 PM, Joseph Wamicha wrote:
Hi Leech,
Thank you for your response. I'm using 2.4 GHz characterized
antennas. No I'm not feeding the signal directly into the USRP2. I
have a 2.4GHz resonant monopole
The RFX2400 is dated 2/6/2006.
On 01/09/2010 02:37, Joseph Wamicha wrote:
Hi,
- I'm now using the uhd firmware and fpga code (txrx_uhd_20100706.bin
and u2_rev3_uhd_20100706.bin images).
- I get some interesting results; when running the examples, it
appears that the daughterboard ca
5 Msps...
Actual TX Rate: 6.25 Msps...
Setting TX Freq: 0.00 Mhz...
Actual TX Freq: 0.00 Mhz...
Setting TX Gain: 0.00 dB...
Actual TX Gain: 0.00 dB...
Done!
There's a machine in the lab with an ISE license so I'm not sure if this is
On 31/08/2010 19:48, Jose
Hi,
We are currently experiencing Transmit and possibly Receive problems
with the USRP2-Flex2400 boards.
- The USRP2 is detected:
# find_usrps -e eth0
00:50:c2:85:32:73 hw_rev = 0x0400
- The latest firmware and Raw Ethernet FPGA images have been written
onto the SDRAM: u2_rev3-20100603.bin,
