Re: [Discuss-gnuradio] Frequency Hopping (Marcus M?ller)

Thanks Marc! Will try this. Best, *Gerome Jan M. Llames * Aspiring Technopreneur | Tech Savvy | Curious Mobile: +639271525124 Email: geromejanlla...@gmail.com "*Because the people who are crazy enough to think they can change the world, are the ones who do.*" - Steve Jobs

[Discuss-gnuradio] Frequency Hopping

Good evening community, I've already made my spectrum sensing using energy detection in GNU Radio and it's working pretty good. Thank you guys! Now, I want my system to tune to a different frequency (say every second). It's frequency hopping. I won't be transmitting any signal, I'm only going to r

[Discuss-gnuradio] UHD: USRP Source

Hi guys, What does the sampling rate in this usrp block does?i'm talking about the uhd:usrp source block. Is this the one that samples the IF from my TVRX2 daughterboard? Or is this the bandwidth that is displayed on the QT Sink? Or is this the bandwidth that needs to be sample. As far as I know,

[Discuss-gnuradio] (no subject)

Hi guys, What does the sampling rate in this usrp block does?i'm talking about the uhd:usrp source block. Is this the one that samples the IF from my TVRX2 daughterboard? Or is this the bandwidth that is displayed on the QT Sink? Or is this the bandwidth that needs to be sample. As far as I know,

[Discuss-gnuradio] Energy Detection Sensing Time Calculation?

Hello community, How do I calculate the sensing time of my Energy Detection flow graph in GRC? Any tips? Thanks. -- Best, *Gerome Jan M. Llames * Engineering Research and Development for Technology (ERDT) Scholar University of San Carlos - Technological Campus Nasipit Talamban, Cebu City, Phi

[Discuss-gnuradio] FFT plot unit

I was able to gather results, and I am really confused with it. I generated a -30 dB signal based on the fft plot shown and transmitted it using a usrp. My spectrum analyzer received a signal at -50 dBm (-80 dB) and my receiver which also uses a usrp received the signal and plotted it at -30 dB. My

[Discuss-gnuradio] File Sink and File Source

Hi guys! I've been doing experiments on GRC. I was trying to connect the Complex Max^2 block and Probe Signal block, but I get an error message. I'm guessing maybe because the output of the Complex Mag^2 is 64-bit while the required input of the Probe Signal block is 32-bit. So I've decided to use

Re: [Discuss-gnuradio] GNU Radio Installation

m:* discuss-gnuradio-bounces+alan.r.hill=gmail@gnu.org [mailto: > discuss-gnuradio-bounces+alan.r.hill=gmail@gnu.org] *On Behalf Of *Gerome > Jan L > *Sent:* Thursday, May 28, 2015 4:31 PM > *To:* discuss-gnuradio@gnu.org > *Subject:* [Discuss-gnuradio] GNU Radio Installa

[Discuss-gnuradio] GNU Radio Installation

I'm installing gnuradio again on my ubuntu 14.04 installed in VMware 11.1.0. I tried it several times, but I can't seem to pass this step: Fetching various packages (Gnu Radio, UHD, gr-osmosdr, gr-iqbal, etc) via the Internet ===> THIS MAY TAKE QUITE SOME TIME <= Fetching Gnu Radio via

Re: [Discuss-gnuradio] UHD: USRP Source (Gerome Jan L)

Hello, What I was trying to say is, how related is the sampling rate in the uhd: usrp source to the sampling rate in the adc which is 100MSPS? Thanks. -- *Gerome Jan M. Llames * Engineering Research and Development for Technology (ERDT) Scholar University of San Carlos - Technological Campus N

[Discuss-gnuradio] UHD: USRP Source

Hello, I'm trying to receive a 6 MHz TV signal. What frequency should I set my UHD: USRP Source in the GRC? Thanks. *Gerome Jan M. Llames * Engineering Research and Development for Technology (ERDT) Scholar University of San Carlos - Technological Campus Nasipit Talamban, Cebu City, Philippines,