Hi Josh,
Thanks for your attention.
I use the wireshark to monitor the ARP interaciton.
Suppos we have node 1 (192.168.200.1) and node 2 (192.168.200.2).
When Node1 initiates the ping request to node2, the ARP request is
broadcast to query who is 192.168.200.2.
At the node2, the ARP request is r
On 04/30/2012 08:09 AM, Alex Zhang wrote:
> Hi,
>
> SBX is the daughterboard which supports full-duplex, but when I run the
> tunnel.py to do the Ping experiment over the OFDM communication link, I
> found that the transmitter can receive a lot of packets which are
> transmitted by itself. This
Is it power in dB for each frequency component of FFT?
Thanks
John
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
I am working with the uhd_burst_detector examples. I ran it for 0.5 second
(using sleep) and was able to generate files using the internal trigger. It
generates the correct number of files with the correct time stamps given the
internal trigger waveform.
I tried to read the file using the read_c
Tom,
I had not caught wind of this. Thanks for sending the link along, I
will check it out and see where I fit in.
Ben
On Mon, Apr 30, 2012 at 11:59 AM, Tom Rondeau wrote:
> Hi Ben,
>
> Thanks for letting us know about your work. This is very exciting.
>
> Have you heard about the Wireless Inn
On 04/30/2012 01:12 AM, Vanessa Quaranta wrote:
> Hi Ben!
>
> Thanks for your response.
>
> If I install OpenBTS 2.8, it will work with my USRP1? And I will be able to
> use my USRPN200 with an other software (without using OpenBTS)?
>
> I'm a little lost with these version of GNURadio (with /
Hi Ben,
Thanks for letting us know about your work. This is very exciting.
Have you heard about the Wireless Innovation Forum's call for
proposals on open LTE frameworks?
http://www.businesswire.com/news/home/20120327006941/en/
This might be a good candidate to pursue it if you are interested.
Hi,
SBX is the daughterboard which supports full-duplex, but when I run the
tunnel.py to do the Ping experiment over the OFDM communication link, I
found that the transmitter can receive a lot of packets which are
transmitted by itself. This causes failure for ARP query and the Ping
requests. I
Hi Ben!
Thanks for your response.
If I install OpenBTS 2.8, it will work with my USRP1? And I will be able to
use my USRPN200 with an other software (without using OpenBTS)?
I'm a little lost with these version of GNURadio (with / without libusrp)
Cheers,
Vanessa
2012/4/28 Ben Hilburn
> OpenB
