On 07/17/2011 08:17 PM, ming he wrote:
> Now usrp N210 uses uhd as driver, thus provides limit capability with
> gnuradio.There are uhd source and sink blocks in gnuradio. This is part of
> the "gr-uhd" component. I want to know whether the other blocks out of
> "gr-uhd" in gnuradio can works?
>
Now usrp N210 uses uhd as driver, thus provides limit capability with
gnuradio.There are uhd source and sink blocks in gnuradio. This is part of
the "gr-uhd" component. I want to know whether the other blocks out of
"gr-uhd" in gnuradio can works?
___
Dis
if you cd to /usr/local/bin and then plug for example
./usrp_fft.py -R A -f 435e6
If the above doesnt work, then reconsider
Patrik
- Original Message -
From: "Miguel A. Vallejo, EA4EOZ"
To:
Sent: Monday, July 18, 2011 3:47
Subject: [Discuss-gnuradio] plotter_base.py problem
Hello
Hello!
I'm trying to play a bit with gnuradio and a funcube dongle pro but I'm
having problems making gnuradio work. I'm using a fresh ubuntu 11.04
install and gnuradio 3.4.0 built from sources.
Everytime a fft display is used, I get the same error. For example,
using FunCube Dongle Pro exam
On 07/17/2011 06:19 PM, Alex DEKKER wrote:
Built GNUradio from git on Debian Testing AMD64 this afternoon, and
intending to use it with a Funcube Dongle and gr-fcd. I am having some
difficulty with the ALSA sink and an ICE1712 [M-Audio 2496] sound
card. I created a very simple flow graph with a
On 07/17/2011 06:19 PM, Alex DEKKER wrote:
Built GNUradio from git on Debian Testing AMD64 this afternoon, and
intending to use it with a Funcube Dongle and gr-fcd. I am having some
difficulty with the ALSA sink and an ICE1712 [M-Audio 2496] sound
card. I created a very simple flow graph with a
On 07/17/2011 06:19 PM, Alex DEKKER wrote:
Built GNUradio from git on Debian Testing AMD64 this afternoon, and
intending to use it with a Funcube Dongle and gr-fcd. I am having some
difficulty with the ALSA sink and an ICE1712 [M-Audio 2496] sound
card. I created a very simple flow graph with a
Built GNUradio from git on Debian Testing AMD64 this afternoon, and
intending to use it with a Funcube Dongle and gr-fcd. I am having some
difficulty with the ALSA sink and an ICE1712 [M-Audio 2496] sound card.
I created a very simple flow graph with a sine wave Signal Source
straight in to an
Hi guys,
I'm trying to sweep the 2.4 - 2.5 GHz band frequency using the USRP2.
The problem is that if it takes me a long time to use time bin_statistics
(through the process of usrp2 -> s2v -> fft -> c2mag -> bin_statistics) to
tune to another frequencies. Because the process takes me a lot of ti
Currently in response to a message in a message queue, I am opening a file
sink which is connected a bit stream of about 10K/sec (one byte per bit). I
keep this file sink open until I receive another message in the queue to
stop the capture, at which time I close() it.
Ideally, the capture would
Hi Jason,
Rite then time to get soldering! :)
Thanks for your rapid response.
Cheers,
Mike
M0MIK
On 17 July 2011 17:16, Jason Abele wrote:
> On Sun, Jul 17, 2011 at 8:52 AM, Mike Jameson wrote:
> > Hi Guys,
> >
> > I have just received my shiny new TVRX2 and have been trying to get it to
>
On Sun, Jul 17, 2011 at 8:52 AM, Mike Jameson wrote:
> Hi Guys,
>
> I have just received my shiny new TVRX2 and have been trying to get it to
> work with the UHD and my USRP1 (serial < 500). My DBSRX works fine with this
> setup.
>
> The symptoms look similar to the issue I had with my WBX which I
On Thu, Jul 14, 2011 at 3:43 PM, Wes Rumble wrote:
> Hello!
> I was just wondering if anyone knew anything about an Alamouti Coding Block
> for GNURadio and/or the GRC. I've seen several references to a block that
> Tom and Matt were working on a few years ago that was supposedly on Tom's
> git
Hi Guys,
I have just received my shiny new TVRX2 and have been trying to get it to
work with the UHD and my USRP1 (serial < 500). My DBSRX works fine with this
setup.
The symptoms look similar to the issue I had with my WBX which I think
required a non-existent clock on my old USRP1. I have spur
14 matches
Mail list logo
