Re: [Discuss-gnuradio] Compile USRP2 FPGA project on ISE 10.1

2010-12-18 Thread Matt Ettus
On 12/14/2010 08:10 AM, Gabriel Morel wrote: Hi everyone, im a student from the ETS of Montreal, so excuse my english plz. I have to recompile the USRP2 fpga project because i will use the mictor conn to talk with another fpga. First, I tried to compile the original project, the one in the direct

Re: [Discuss-gnuradio] SSB modulation with USRP2 Sink

2010-12-18 Thread Marcus D. Leech
On 12/18/2010 04:07 PM, Steve Mcmahon wrote: Hello: How can I get SSB modulation with the USRP2? Currently I have a Signal Source producing a sine wave, and I've connected it into a USRP2 Sink. The spectrum of the output shows the upper sideband, the lower sideband, and the carrier. For examp

[Discuss-gnuradio] SSB modulation with USRP2 Sink

2010-12-18 Thread Steve Mcmahon
Hello: How can I get SSB modulation with the USRP2? Currently I have a Signal Source producing a sine wave, and I've connected it into a USRP2 Sink. The spectrum of the output shows the upper sideband, the lower sideband, and the carrier. For example, if my tone is 1 MHz and I tune the USRP2 S

Re: [Discuss-gnuradio] pmt_serial_tags

2010-12-18 Thread Josh Blum
Ok getting warmer: The in tree build runs the command and generated the file: GUILE_LOAD_PATH="/home/jblum/src/gnuradio/gruel/src/scheme" /usr/bin/guile -e main -s ./../../scheme/gnuradio/gen-serial-tags.scm ./../../scheme/gnuradio/pmt-serial-tags.scm /home/jblum/src/gnuradio/gruel/src/include/gr

Re: [Discuss-gnuradio] pmt_serial_tags

2010-12-18 Thread Tom Rondeau
On Sat, Dec 18, 2010 at 5:00 AM, Josh Blum wrote: > this command produces nothing on my computer: > >> >> $(PMT_SERIAL_TAGS_H): $(srcdir)/../../scheme/gnuradio/gen-serial-tags.scm >> $(srcdir)/../../scheme/gnuradio/pmt-serial-tags.scm >>       $(RUN_GUILE) $(srcdir)/../../scheme/gnuradio/gen-seri

Re: [Discuss-gnuradio] gnuradio volk compilation err or: error: ‘_mm_popcnt_u64’ was not declared in this sco pe

2010-12-18 Thread Tom Rondeau
On Sat, Dec 18, 2010 at 6:23 AM, Ruben Merz wrote: > Hi Tom, > > Thanks. It works > > Ruben Great, thanks! Tom > On 12/18/10 6:42 AM, Tom Rondeau wrote: >> >> On Fri, Dec 17, 2010 at 3:11 AM, Ruben Merz >>  wrote: >>> >>> Hi Tom >>> >>> >>> Thanks. Using configure --with-lv_arch="generic mmx

Re: [Discuss-gnuradio] gnuradio vol k compilation error: error: ‘_mm_popc nt_u64’ was not declared in this scope

2010-12-18 Thread Ruben Merz
Hi Tom, Thanks. It works Ruben On 12/18/10 6:42 AM, Tom Rondeau wrote: On Fri, Dec 17, 2010 at 3:11 AM, Ruben Merz wrote: Hi Tom Thanks. Using configure --with-lv_arch="generic mmx sse sse2 sse3 ssse3 sse4_a sse4_1" i.e. removing 64 and sse4_2 worked. Ruben Ok, I pushed an update to n

[Discuss-gnuradio] pmt_serial_tags

2010-12-18 Thread Josh Blum
this command produces nothing on my computer: > > $(PMT_SERIAL_TAGS_H): $(srcdir)/../../scheme/gnuradio/gen-serial-tags.scm > $(srcdir)/../../scheme/gnuradio/pmt-serial-tags.scm > $(RUN_GUILE) $(srcdir)/../../scheme/gnuradio/gen-serial-tags.scm > $(srcdir)/../../scheme/gnuradio/pmt-serial

Re: [Discuss-gnuradio] UHD: cannot find usrp2.

2010-12-18 Thread Josh Blum
> -A INPUT -m state --state NEW -m udp -p udp --sport 49152:49153 > --dport 1024:65535 -j ACCEPT > You should just need 49152 to be open. The broadcasts only occur on the control port. > Appears to allow uhd_find_devices to do its thing. Glad to hear it! > > Any protocol that does "discover

Re: [Discuss-gnuradio] xtclsh not found

2010-12-18 Thread Josh Blum
On 12/17/2010 10:55 PM, anirudh2059. wrote: > > Hi, > > When I try to make the Makefile, i get an error in the console saying that > xtclsh not found. Where can i get this file? It comes with Xilinx ISE. I usually setup by my .bashrc like this: #XILINX_ROOT=/opt/Xilinx/10.1 XILINX_ROOT=/opt/