Hi,
I have created a new SD Card with the latest trunk image of the FPGA and
the s/w for the WBX and the situation is exactly the same as before.
The host is an IBM T61p Thinkpad running Debian testing. I normally run
Network Manager but have stopped it and brought the eth0 port up via the
comman
Steve,
If you have GNUradio trunk installed, did you update your SD card with
a firmware from:
http://gnuradio.org/releases/usrp2-bin/trunk/
You'll need txrx_wbx.bin
Jason
On Fri, Apr 23, 2010 at 10:56 PM, Steve Glass wrote:
> Hi,
>
> I've just received my USRP2 and WBX. Using the Ettus SD Ca
Here is a simple open source project that gives control to parallel ports in
python, and it is platform independent.
http://pyserial.sourceforge.net/pyparallel.html
I used its sister project pyserial in conjunction with GNURadio with great
results. The one problem is that there is no GRC block f
On Fri, 2010-04-23 at 14:58 -0400, Marcus D. Leech wrote:
> Anyone know of any reasonably-priced network analysers, up to 2 or
> 3GHz? Basic S21 and S11
> measurements would be a good start.
I've been contemplating trying such a thing using using a WBX
daughterboard. It hasn't got past the "ta
On 04/24/2010 02:47 PM, Eric Schneider wrote:
> On Fri, 2010-04-23 at 14:58 -0400, Marcus D. Leech wrote:
>
>> Anyone know of any reasonably-priced network analysers, up to 2 or
>> 3GHz? Basic S21 and S11
>> measurements would be a good start.
>>
> I've been contemplating trying such a t
Also note that with the WBX you'll need to reflash the firmware on the SD card
with txrx_wbx.bin. But this isn't the cause of your problem. You could also
try just giving your interface a private ip, ifconfig eth0 192.168.1.1 and see
if that works.
Tim
-Original Message-
From: "christ
Hi Steve !
Perhaps you'd need to run this before running find_srps :
$ sudo ethtool -A eth0 rx on
I don't know any longer if you have to run it sudo, and so with find_usrps
Chris
Message d'origine
De: discuss-gnuradio-bounces+christophe.paring=etsmtl...@gnu.org de la part de
S
I have solved it and updated to the newest version. Hope it will solve usrp2
overrun problem.
Thank you Don and Johnathan .
Andy
--
View this message in context:
http://old.nabble.com/fix-for-usrp2-overruns-when-stopping-and-restarting-rx-streaming-tp28314794p28349271.html
Sent from the GnuRad
