On Sat, 2009-06-06 at 21:57 -0700, Eric Blossom wrote:
> On Sat, Jun 06, 2009 at 02:30:05AM -0400, davek wrote:
> > I would like to get my usrp conneced to my TVRO satellite dish. I am
> > wondering...
> > Is the DBSRX daughter card suitable for direct connection to a satellite
> > LNB?
>
> Yes.
Hi!
I've been creating a block based on the howto create a block example.
But this time something strange happened and I can't seem to find the cause.
I already had several input parameters in the altered version of the block,
but after adding the variable "frequency" in the input I started gett
We have already implemented start_streaming_at(0) (see attached file). The
problem is that the FPGA doesn't reset the ddc on PPS so the sample marked with
'time stamp' = 0 is delayed by an unknown fractional number of samples realtive
to the output rate.
regards
Patrik and Ulrika
How are you starting the streaming samples from the two USRP2's? The
default start_rx_streaming call (and thus, the standard usrp2_source block)
just starts streaming when it receives the command from the host PC. So any
delay between when each USRP2 receives the command over the gig-E interface
m
Hi everyone!
When transmitting with the USRP2 and the RFX400 daughterboard, we get a very
significant frequency spike at the tuned center frequency. The level of the
spike is almost as high as the signal level, and it will appear even when
transmitting a 0-amplitude sine wave signal. Does anyon
And again we are back to this misspelled topic.
Thank you Matt for your reply. It turned out that we used non synchronous 1PPS
and 10 MHz signals after all, and by using a 1PPS synchronous to the 10 MHz we
got different results.
However, we still don't get the time stamped samples to be perfec
Hello
I am trying to write a GUI to do the transmissions made with the
benchmark_tx.py example. For some reason, after sending the 3rd packet, my
GUI would freeze and require force quit. I took code segments from GUI
examples and benchmark_tx.py and I am not understanding why the GUI is
freezing (
Hi
The information is on: http://gnuradio.org/trac/wiki/UsrpDBoardRFX900
Greetz
Dennis
jimmyzhang schrieb:
Dear all,
I search it for a long while ,consequently nothing useful has been
found. Is there anyone who
know it can tell me how to do it in detail? I do appreciate it very mu
Dear all,
I search it for a long while ,consequently nothing useful has been
found. Is there anyone who
know it can tell me how to do it in detail? I do appreciate it very much.
--
View this message in context:
http://www.nabble.com/How-to-remove-ISM-band-fi
