On Mon, Aug 25, 2008 at 11:36 PM, Murtuza <[EMAIL PROTECTED]> wrote:
> By the way can you say what that warning means.
It looks like one of the system supplied M4 macros is missing a pair
of brackets ("[ ]"). It's probably harmless in our case, but can
result in incorrect operation depending on
The GNU Radio Companion ("GRC") is graphical tool that allows rapid
experimentation with and code generation of GNU Radio flow graphs.
Developed by Josh Blum and previously available as a separate
application, it has now been integrated into GNU Radio proper. By
installing the trunk version of GNU
Sorry that was a wrong email. I apologize for it. Please ignore it. I didn't
mean to send the mail. It was only a draft that I meant to discard but
instead hit the send.
By the way can you say what that warning means.
Thanks again
Ali
On Tue, Aug 26, 2008 at 1:26 AM, Johnathan Corgan <
[EMAIL P
Murtuza wrote:
> I tried installing the latest svn gnuradio installation on an Ubuntu
> Fiesty system. This is the error i get after the bootstrap is run. I do
> not understand what it means. It never happened to me earlier.
>
> [EMAIL PROTECTED]:/opt/gnuradio$ sudo ./bootstrap
> /usr/share/acloc
Hi
I tried installing the latest svn gnuradio installation on an Ubuntu Fiesty
system. This is the error i get after the bootstrap is run. I do not
understand what it means. It never happened to me earlier.
[EMAIL PROTECTED]:/opt/gnuradio$ sudo ./bootstrap
/usr/share/aclocal/lf_x11.m4:33: warning
Eric Blossom wrote:
A new Cell product by Sony was announced this week
at SIGGRAPH:
www.sony.com/zego
Looks like a 1U cell. Not sure if they're going to give Linux access
to the RSX or not.
And then put this in the one PCI-Express slot:
http://fusionio.com/PDFs/FusionSpecSheet.pdf
(sorr
Is it possible to simultaneously transmit through 'TX/RX' and receive
on 'RX2' of a single RFX board?
All I get out of the RX chain is low power noise and I'm trying to
track down the problem but I want to rule out the obvious things (I've
spent way too much time on this lately).
___
To me, all of this says that the board came to me with the phase
clocks of the two transmitters aligned for MIMO, is that assumption
correct?
Yes.
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinf
On Mon, Aug 25, 2008 at 03:46:45PM -0400, Gregory Maxwell wrote:
> On Mon, Aug 25, 2008 at 2:17 PM, Johnathan Corgan
> <[EMAIL PROTECTED]> wrote:
> > On Sun, Aug 24, 2008 at 11:58 PM, Ulf Lindgren A
> > <[EMAIL PROTECTED]> wrote:
> >
> >> I have been trying the tx_voice.py and rx_voice.py, and I h
On Mon, Aug 25, 2008 at 2:17 PM, Johnathan Corgan
<[EMAIL PROTECTED]> wrote:
> On Sun, Aug 24, 2008 at 11:58 PM, Ulf Lindgren A
> <[EMAIL PROTECTED]> wrote:
>
>> I have been trying the tx_voice.py and rx_voice.py, and I have had some
>> problems with the rx_voice.py failing. However, I think there
On Sun, Aug 24, 2008 at 11:58 PM, Ulf Lindgren A
<[EMAIL PROTECTED]> wrote:
> I have been trying the tx_voice.py and rx_voice.py, and I have had some
> problems with the rx_voice.py failing. However, I think there is a bug in
> the rx_voice.py file, at least everything works when I change it.
Go
On Mon, Aug 25, 2008 at 10:43 AM, Dan Halperin
<[EMAIL PROTECTED]> wrote:
> On this note, but slightly tangential, there are a bunch of third party
> gnuradio plugins that are not being kept up to date and even no longer work
> with gnuradio without significant changes. (E.g., top block vs flow gr
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Aug 25, 2008, at 10:37 AM, Johnathan Corgan wrote:
On Fri, Aug 22, 2008 at 2:00 AM, Ulf Lindgren A
<[EMAIL PROTECTED]> wrote:
I have made a fix for the change in comedilib.
Thanks for the update.
We'll have to figure out a way to conditional
On Mon, Aug 25, 2008 at 10:13 AM, Don Ward <[EMAIL PROTECTED]> wrote:
> I am pleased to report that release 3.1.3 installs on Cygwin with no patches
> and no need to run bootstrap (see
> http://www.gnuradio.org/trac/wiki/CygwinInstallMain).
Great!
> The only remaining
> issue is that libtool 2.2
On Fri, Aug 22, 2008 at 2:00 AM, Ulf Lindgren A
<[EMAIL PROTECTED]> wrote:
> I have made a fix for the change in comedilib.
Thanks for the update.
We'll have to figure out a way to conditionalize the code between the
two libcomedi versions so the component works for either one. Since
you are th
On Mon, Aug 25, 2008 at 4:35 AM, Naoufel Amri <[EMAIL PROTECTED]> wrote:
> ./usrp_radar_mono.py -T A -R B -f 2.41e09 --ton=300e-09
> --tlook=12e-06 --prf=1 -v -F /home/naoufel/data.bin -w 16e6
The value on Ton is rather low for your chirp width. You are trying
to sweep 16 MHz over 20 USRP cl
Johnathan Corgan wrote:
The 3.1.3 release tarballs were bootstrapped with libtool 2.2. Please
let me know if this fixes your issue on Cygwin.
I am pleased to report that release 3.1.3 installs on Cygwin with no patches
and no need to run bootstrap (see
http://www.gnuradio.org/trac/wiki/Cygw
Hi all again,
at the end, it's enough by following the "src1 = usrp.source_c(which=0)"
approach as prescribed. It seems to be working: one USRP acting as Tx in one USB
plug and the other USRP acting as Rx into another USB plug: just modifying less
than 20 lines of code -always on top of the usrp
Hi,
I have some questions about my rfx2400 board. I was having trouble
with some MIMO stuff, so I got pointed in the direction of this note:
http://www.gnuradio.org/trac/wiki/USRPClockingNotes and went off to
check to see if my board has had the modifications or not.
After looking at the board
thank you for your replying and your answers, so as i said before i
work with the software: ./usrp_radar.py and i use a USRP Card to
realise a dualstatic radar.
the Command is:./usrp_radar_mono.py -T A -R B -f 2.41e09 --ton=300e-09
> --tlook=12e-06 --prf=1 -v -F /home/naoufel/data.bin -w 16e6
Yes Ulf,
some changes are going on in the building blocks of GnuRadio. For some
guidance, have a look at
http://lists.gnu.org/archive/html/discuss-gnuradio/2008-08/msg00222.html
We are going to create a Wiki page about the required changes to old
code when things slow down a bit...
On Mon, Aug 2
21 matches
Mail list logo
