于 2014年11月06日 23:27, Jesse Gross 写道:
On Wed, Nov 5, 2014 at 10:58 PM, FengYu LeiDian
wrote:
于 2014年11月06日 00:08, Jesse Gross 写道:
On Tue, Nov 4, 2014 at 11:03 PM, FengYu LeiDian
wrote:
Hi
Env: redhat 6.4, OpenvSwitch-2.1.2, using native
datapath/linux/openvswitch.ko module
VM1 on host1
于 2014年11月06日 00:08, Jesse Gross 写道:
On Tue, Nov 4, 2014 at 11:03 PM, FengYu LeiDian
wrote:
Hi
Env: redhat 6.4, OpenvSwitch-2.1.2, using native
datapath/linux/openvswitch.ko module
VM1 on host1, VM2 on host2, host1 and host2 are connected by a switch.
both VM enable virtio/vhost when
Hi
Env: redhat 6.4, OpenvSwitch-2.1.2, using native
datapath/linux/openvswitch.ko module
VM1 on host1, VM2 on host2, host1 and host2 are connected by a switch.
both VM enable virtio/vhost when launching VM
case1:
VM -> tap -> ovs-bridge -> eth1
case2:
VM -> tap -> ovs-bridge -> vxlan -> eth1
W
Hi, all
Standard openstack has a Linux bridge on top of openvswitch bridge[1]
this Linux bridge is used to setup iptables rule to allow VM access
to the outside world, for example, allow VM port 22 access, so external
host could ssh to this VM.
Can openvswitch bridge has the same mechanism to be
于 2014年10月31日 00:26, Flavio Leitner 写道:
On Thu, Oct 30, 2014 at 02:10:37PM +0800, FengYu LeiDian wrote:
Hi
ovs-vsctl add-port OVS-BR0 vxlan2 -- set Interface vxlan2 type=vxlan
options:remote_ip=192.168.1.11
[...]
status : {tunnel_egress_iface="eth0", tunnel_egress_iface_carrier=
Hi
ovs-vsctl add-port OVS-BR0 vxlan2 -- set Interface vxlan2 type=vxlan
options:remote_ip=192.168.1.11
ovs-vsctl list Interface vxlan2
_uuid : 9aa6d465-fb5c-481b-bc7f-89412a7b1f75
admin_state : up
bfd : {}
bfd_status : {}
cfm_fault : []
cfm_fault_status : []
cfm_flap_count : []
cfm_health : []
cf
