Hi OvS-Team:
Does ovs-2.5 support NAT functionality? From the release notes I only see
description related to CT.
If NAT support exists, is it dependent on Linux kernel versions or any
kernel patches?
Regards,
Prathap
___
discuss mailing list
discu
Hi,Joe:
Sorry for late reply. i create a bridge 'br0', and add port 'eth0' to it,
set port br0 vlan tag=50
for network driver reason, i must use VLAN splinter, and so i use the cmd
below
ovs-vsctl set interface eth0 other_config:enable-vlan-splinters=true
i give br0 an ip addresss 1.1.1.1/24,
> On Apr 26, 2016, at 8:16 PM, Maurice Qureshi
> wrote:
>
> Have following questions on OVN
>
> 1. Tried to use the ovs sandbox as described in
> http://benpfaff.org/~blp/ovn-lbnl.pdf. Got following message, but the
> commands like ovn-nbctl are failing. Both OVN daemons (ovn-northd an
Have following questions on OVN
1. Tried to use the ovs sandbox as described in
http://benpfaff.org/~blp/ovn-lbnl.pdf. Got following message, but the commands
like ovn-nbctl are failing. Both OVN daemons (ovn-northd and ovn-controller)
are running in addition to ovn-controller-vtep. I am
2016-04-26 9:08 GMT-07:00 Traynor, Kevin :
> > -Original Message-
> > From: discuss [mailto:discuss-boun...@openvswitch.org] On Behalf Of
> > Kochba, Alon
> > Sent: Tuesday, April 26, 2016 4:38 PM
> > To: Ben Pfaff ; Yi Ba
> > Cc: b...@openvswitch.org
> > Subject: Re: [ovs-discuss] ovs ge
Hi,
We have an application that we need to be able to restart quickly. It listens
on a multicast address, so a restart causes IGMPv3 leave packets to be sent and
join packets soon after. OVS250 receives the leave packet and removes the entry
from the mdb, but ignores the join and the entry does
hello everyone,
im using OvS and i want to send packets directly to the kernel, i've made
some researches i found that OFPP_NORMAL action will handle this problem
but the packet are either sent to controller neither to the kernel
could you help me please on this issue ?
thanks
__
> -Original Message-
> From: discuss [mailto:discuss-boun...@openvswitch.org] On Behalf Of
> Kochba, Alon
> Sent: Tuesday, April 26, 2016 4:38 PM
> To: Ben Pfaff ; Yi Ba
> Cc: b...@openvswitch.org
> Subject: Re: [ovs-discuss] ovs get stuck when running traffic from VM
> to VM on same compu
OVS doesn't support that.
On Tue, Apr 26, 2016 at 03:53:44PM +, Evgeny Sandler wrote:
> Hi Ben,
>
> Yes I know, but I didn't try to configure QinQ functionality, only adding
> additional .1q tag, this is slightly different and can be done by standard
> Ethernet switch.
>
> Evgeny
>
> On
Hi Ben,
Yes I know, but I didn't try to configure QinQ functionality, only adding
additional .1q tag, this is slightly different and can be done by standard
Ethernet switch.
Evgeny
On 26 ? 2016, at 18:17, Ben Pfaff mailto:b...@ovn.org>> wrote:
On Tue, Apr 26, 2016 at 02:55:51PM +, Ev
Daniele, can you help Alon out? I believe that you were tracking this
problem.
On Tue, Apr 26, 2016 at 03:37:59PM +, Kochba, Alon wrote:
> Hi Ben,
>
> Could you point us to the commit that fixed this issue?
> We already tried patching with this commit which seemed relevant, but the
> issue
Hi Ben,
Could you point us to the commit that fixed this issue?
We already tried patching with this commit which seemed relevant, but the issue
still recreated -
https://github.com/openvswitch/ovs/commit/f519a72d9a3708fbc5f796f176e7c8bd3dcfb738
We will retry with your suggestion of using the 2.
Hi Petr,
below my replies inline.
Regards,
Antonio
From: discuss [mailto:discuss-boun...@openvswitch.org] On Behalf Of Petr Horacek
Sent: Tuesday, April 26, 2016 1:10 PM
To: discuss@openvswitch.org ML
Cc: Edward Haas ; Dan Kenigsberg
Subject: [ovs-discuss] IP on bridge / internal iface
Hello,
On Tue, Apr 26, 2016 at 02:55:51PM +, Evgeny Sandler wrote:
> I'm using OVS-2.1.3 and I'm trying to push additional .1q VLAN tag to
> Ethernet frame which already has one VLAN tag by using ovs-ofctl
> command as follows:
OVS doesn't support QinQ.
___
the directory /var/run/openvswitch has already exist.
This is what make me not understand.
-- 原始邮件 --
发件人: "Ben Pfaff" ;
发送时间: 2016年4月26日(星期二) 22:55
收件人: "307419...@qq.com" <307419...@qq.com>;
抄送: "discuss" ;
主题: Re: [ovs-discuss] ovs service cannot start when rebo
On Tue, Apr 26, 2016 at 01:46:26PM +0900, Borasy Kong wrote:
> Can someone help show me how the flow stats is generated. For example,
> where does the ovs-ofctl dump-flows get the data like n_packet, n_bytes
> from each time this command is issued. Is there any particular spot in the
> OVS source c
On Tue, Apr 26, 2016 at 07:09:39PM +0800, 307419...@qq.com wrote:
> Apr 26 03:51:17 ppmaster ovsdb-server[711]:
> ovs|2|stream_unix|ERR|/var/run/openvswitch/db.sock: binding failed: No
> such file or directory
/var/run/openvswitch doesn't exist. You'll have to create it.
(The scripts that
Hi,
I'm using OVS-2.1.3 and I'm trying to push additional .1q VLAN tag to Ethernet
frame which already has one VLAN tag by using ovs-ofctl command as follows:
ovs-ofctl add-flow br-int -O OpenFlow12
priority=3,in_port=5,actions=push_vlan=0x8100,mod_vlan_vid:3, output:8
But OVS overwrites
On Tue, Apr 26, 2016 at 02:10:20PM +0200, Petr Horacek wrote:
> is there any difference between setting an IP on OVS bridge and setting in
> on its internal iface?
>
> ovs-vsctl add-br br0
> ip addr add 192.168.1.10 dev br0
>
> vs.
>
> ovs-vsctl add-br br0 -- add-port br0 mgmt0 -- set Interface
On Tue, Apr 26, 2016 at 01:56:58PM +0200, Joel Frank wrote:
> I got some questions regarding ovs and flow entry monitoring. I found
> several patches back in Jun 2014 implementing Flow Monitors
> (http://openvswitch.org/pipermail/dev/2014-June/041673.html). However I
> can't get them to work with c
Hello,
is there any difference between setting an IP on OVS bridge and setting in
on its internal iface?
ovs-vsctl add-br br0
ip addr add 192.168.1.10 dev br0
vs.
ovs-vsctl add-br br0 -- add-port br0 mgmt0 -- set Interface mgmt0
type=internal
ip addr add 192.168.1.10 dev mgmt0
Thanks,
Petr
___
HI everyone,
I got some questions regarding ovs and flow entry monitoring. I found
several patches back in Jun 2014 implementing Flow Monitors
(http://openvswitch.org/pipermail/dev/2014-June/041673.html). However I
can't get them to work with current Ryu 4.1 and ovs 2.4.0. However ovs
rejects flow
Dear Ben, all,
thanks a lot for the reply.
Restarting the vswitchd helps, but it is in my opinion too heavyweight a
solution
for a simple mirror deletion and re-creation. Could you please check whether
there
is sth in the related ovs code that prevents the correct “clearing” of the
mirrored tr
hi
I write a simple script,cp it to the /etc/init.d/,then chkconfig it on.
the name of the script is "script-tst".
#!/bin/sh
### BEGIN INIT INFO
# Provides: ovs-hugepage
# Required-Start:
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
#chkconfig 2345 99 99
# Shor
Regards
_Sugesh
From: SANKET RAUT [mailto:ssr8...@g.rit.edu]
Sent: Monday, April 25, 2016 2:50 PM
To: Chandran, Sugesh
Cc: b...@openvswitch.org
Subject: Re: [ovs-discuss] GRE ipsec tunnels over open vswitch
Hello,
Thanks for your reply.
Could you please tell me that open vswitch package name,
25 matches
Mail list logo