No missing expected images.
Compose FAILS proposed Rawhide gating check!
2 of 43 required tests failed
openQA tests matching unsatisfied gating requirements shown with **GATING**
below
Failed openQA tests: 13/199 (x86_64), 14/134 (aarch64)
New failures (same test not failed in Fedora-Rawhide-20
On Wed, 31 Mar 2021, Petr Menšík wrote:
strongswan and NetworkManager-strongswan packages were passed to me from
previous maintainer. I admit I have little experience with them and do
not run any service based on them. Because IPSsec is quite complex
technology, I am looking for help with its ma
On Thu, Jun 17, 2021 at 9:46 AM Jerry James wrote:
> Okay, that's good to know. It looks like the gnomeui bindings in
> ocaml-lablgtk are optional. I'll have to check whether anything
> sitting on top of ocaml-lablgtk uses those bindings.
As far as I can tell, no Fedora package uses the gnomeui
On Thu, Jun 17, 2021 at 9:39 AM Jerry James wrote:
> I have worked out the issues I was having with Macaulay2 and sagemath,
> so I am going to start doing these builds. The list of packages to be
> built has changed slightly since the first email I sent. If you need
> to build any of the package
On 6/18/21 1:14 PM, Robert-André Mauchin wrote:
I've started some but more help to review them all would be appreciated.
I am in your debt, Robert-André. Thanks so much!
--
Major Hayden
OpenPGP_0x737051E0C1011FB1.asc
Description: OpenPGP public key
OpenPGP_signature
Description: OpenPGP di
On 6/15/21 10:15 PM, Major Hayden wrote:
On 6/14/21 7:40 AM, Major Hayden wrote:
3) How should I go about getting these smaller packages reviewed?
The majority of them are almost identical.
All of the Azure SDK components are up for review[0].
It's a lot to review (about 83 packages)
On 6/17/21 12:50 AM, Casey Rodarmor wrote:
Hi there,
I maintain a command runner, written in Rust:
https://github.com/casey/just
It's very much like make, except a lot nicer, and doesn't have a build
system, so it's just for saving and running commands. It's reasonably
popular, and I wanted to
https://fedoraproject.org/wiki/Changes/RemoveAuthselectCompatPackage
== Summary ==
Authselect replaced authconfig tool in Fedora 28. To enable some level
of backwards compatibility, it ships the authconfig command as a
wrapper around authselect calls in package "authselect-compat".
Authselect is
On Fri, 2021-06-18 at 17:05 +0200, Vít Ondruch wrote:
> Hi,
>
> coffee-script package was recently retired due to being orphaned and
> FTBFS for some while. Since there are some other packages depending on
> it, I have decided to unretire it [1]. I have working package ready (at
> least to the p
Hi everybody,
rpmautospec[1] is now deployed on the Koji builders. It took a little
longer than expected, but went smoothly otherwise—at most, you should
have noticed any currently running builds of yours being restarted
when we restarted the kojid processes.
We invite you to use automatic releas
On Fri, 2021-06-18 at 16:27 +0200, Simon Pichugin wrote:
> Hi folks,
> my name is Simon Pichugin and I am a maintainer for OpenLDAP.
>
> Recently, OpenLDAP has released 2.5 version.
> It has quite a big amount of changes -
> https://www.openldap.org/software/release/announce.html
> And it includes
Hi,
coffee-script package was recently retired due to being orphaned and
FTBFS for some while. Since there are some other packages depending on
it, I have decided to unretire it [1]. I have working package ready (at
least to the point it builds and I have fixed the test suite broken
since F29
Hi folks,
my name is Simon Pichugin and I am a maintainer for OpenLDAP.
Recently, OpenLDAP has released 2.5 version.
It has quite a big amount of changes -
https://www.openldap.org/software/release/announce.html
And it includes a pretty important "Upgrading from 2.4.x" section -
https://www.openld
* Tom Stellard:
> Instead of doing two scratch builds, I just added:
> %global __brp_check_rpaths time /usr/lib/rpm/check-rpaths to the spec file
> and did a scratch build[1].
>
> The results on x86_64 were:
>
> real 13m51.517s
> user 8m53.216s
> sys 7m34.105s
>
> Overall build time for the sc
On Fri, Jun 18 2021 at 08:02:05 AM +1000, Peter Hutterer
wrote:
Right now pipewire gets around this by hardcoding
pipewire-media-session and
starting it directly (instead of the systemd service) but that makes
it hard
to replace.
Anyway, sounds like I'd need to get the FESCo approval for both
On Thu, Jun 10, 2021 at 4:27 PM Ben Cotton wrote:
>
> I adopted sphinx[1] a while back. At the time it was relevant to some
> work I was doing. It is not anymore. Since I've basically ignored it
> for a while, I figure it's time to turn it over. Neither of the
> co-maintainers indicated an interes
On Fri, 18 Jun 2021 at 01:51, Gerd Hoffmann wrote:
>
> Hi,
>
> > The problems with this is that we are taking a fairly fuzzy data set
> > and making it much easier to track individual users in ways seen as
> > problematic by various laws and regulations.
>
> Well, depends on how you store the da
Ok, I think I got it now. So first of all, the 'Open location' option in
GIMP expects a valid URI address - path to some local/network file (which
the data:image/svg... string is not).
>From my point of view, it's ok, if the GIMP ends with an error message
explaining something like - No such file.
> I've tried to download and open...
When I use RMB -> "Save image as" in Firefox, and then open the downloaded .svg
in GIMP, everything works fine.
The crash only happens when I take the "data:image/svg..." string and use "Open
location" in GIMP.
> What version/type of GIMP are you using? (rpm
Thanks for the information.
I've tried to download and open the OpenFinance company logo in GIMP on F34
(GNOME, XOrg) and all works as expected. The GIMP opens the import window
and proceeds normally.
What version/type of GIMP are you using? (rpm -q gimp)
Best regards
Josef Ridky
Senior Softwar
> Well, it would be great to get even terminal output from GIMP...
Terminal output under MATE (where GIMP crashes):
--- start
(gimp:7907): Gdk-WARNING **: 13:23:36.694: Native Windows wider or taller than
32767 pixels are not supported
(gimp:7907): Gdk-ERROR **: 13:23:36.817: The program 'g
Well, it would be great to get even terminal output from GIMP, if possible
(save it and then use 'gimp --verbose file-name').
Based on the txt file, it looks like it should be originally SVG file, in
that case, GIMP is able to open SVG file, but it make raster out of it, so
could be handy to see,
Recently I tried to edit some image from the internet in GIMP. Pressing "open
image in new tab" in Firefox yielded a "data:image/svg+xml;base64..." link.
Being a lazy person, instead of saving the image to disk, I selected "open
location" in GIMP and pasted the link there. Next thing I know, the
No missing expected images.
Failed openQA tests: 8/8 (x86_64)
Old failures (same test failed in Fedora-Cloud-34-20210617.0):
ID: 911339 Test: x86_64 Cloud_Base-qcow2-qcow2 base_reboot_unmount
URL: https://openqa.fedoraproject.org/tests/911339
ID: 911340 Test: x86_64 Cloud_Base-qcow2-qc
Thanks for your work, Björn!
On Thu, Jun 17, 2021 at 11:13 AM Björn 'besser82' Esser <
besse...@fedoraproject.org> wrote:
> Am Donnerstag, dem 17.06.2021 um 08:55 +0200 schrieb Björn 'besser82'
> Esser:
> > Am Mittwoch, dem 16.06.2021 um 21:18 +0200 schrieb Björn 'besser82'
> > Esser:
> > > Am Mi
Thanks Alex for the hard (and often thankless) work in maintaining
those packages for so much time!
Cheers,
Mario
On Thu, Jun 17, 2021 at 5:46 PM Alex Macdonald wrote:
>
> Hi everyone,
>
> I am writing to let everyone know that JDK Mission Control (JMC) and
> it’s dependencies will be orphaned i
I always use `fedpkg import` and this command has `--offline` option,
which populates the `sources` file without uploading the archives to the
look-a-side cache.
Vít
Dne 17. 06. 21 v 18:04 Ken Dreyer napsal(a):
On Thu, Jun 17, 2021 at 8:33 AM Richard Shaw wrote:
On Thu, Jun 17, 2021 at 7:
No missing expected images.
Soft failed openQA tests: 1/8 (x86_64), 1/8 (aarch64)
(Tests completed, but using a workaround for a known bug)
Old soft failures (same test soft failed in Fedora-Cloud-33-20210617.0):
ID: 911221 Test: x86_64 Cloud_Base-qcow2-qcow2 cloud_autocloud
URL: https://op
28 matches
Mail list logo
