This library provides interfaces such as
real-time clock initialization
to get time and setting time.
Signed-off-by: xianglai li
---
.../LsRealTimeClockLib/LsRealTimeClock.h | 41 +++
.../LsRealTimeClockLib/LsRealTimeClockLib.c | 343 ++
.../LsRealTimeClockLib/LsRealTimeC
Serial Port library for LoongarchQemuPkg
Signed-off-by: xianglai li
---
.../LoongArchQemuPkg/Include/Library/Cpu.h| 344 ++
.../Include/LoongArchQemuPlatform.h | 103 +++
.../Library/SerialPortLib/SerialPortLib.c | 612 ++
.../Library/SerialPortLib/Seria
The driver produces EFI_CPU_ARCH_PROTOCOL,
Initialize the exception entry address.
Signed-off-by: xianglai li
---
.../LoongArchQemuPkg/Drivers/CpuDxe/CpuDxe.c | 382 ++
.../LoongArchQemuPkg/Drivers/CpuDxe/CpuDxe.h | 153 +++
.../Drivers/CpuDxe/CpuDxe.inf |
Add SEC Code And Readme.md for LoongArchQemu
Signed-off-by: xianglai li
Signed-off-by: xianglai li
---
Maintainers.txt | 4 +
.../Include/LoongArchAsmMacro.h | 23 +
.../Loongson/LoongArchQemuPkg/Loongson.dec| 38 ++
.../Loongson/LoongArchQem
QemuFwCfgLib for PEI phase.
This library obtains the QemuFWCfg base address by
directly parsing the fdt, and reads and writes the data
in the QemuFWCfg by operating on the QemuFWCfg base address.
Signed-off-by: xianglai li
---
.../Include/IndustryStandard/QemuFwCfg.h | 95
.../Include
Added the function of saving non-volatile variables.
Signed-off-by: xianglai li
---
Platform/Loongson/LoongArchQemuPkg/Loongson.dec| 6 ++
Platform/Loongson/LoongArchQemuPkg/Loongson.dsc| 2 +-
Platform/Loongson/LoongArchQemuPkg/Loongson.fdf| 14 ++
.../Loongson/Loo
Add PCI CpuIo protocol.there is no fix translation
offset between I/O port accesses and MMIO accesses.
Add PciCpuIo2Dxe driver to implement EFI_CPU_IO2_PROTOCOL
to add the translation for IO access.
Signed-off-by: xianglai li
---
.../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c | 548 ++
The uploaded code generates firmware to support Linux launching on the
LoongArch platform under qemu,
So it will run in a virtual machine.
LoongArch is the general processor architecture of Loongson.
You can get the latest LoongArch documents or LoongArch tools at
https://github.com/loongson/.
Support Dxe for LoogArch.
Signed-off-by: xianglai li
---
.../Loongson/LoongArchQemuPkg/Loongson.dec| 14 +-
.../Loongson/LoongArchQemuPkg/Loongson.dsc| 420 +-
.../Loongson/LoongArchQemuPkg/Loongson.fdf| 243 ++
.../LoongArchQemuPkg/Loongson.fdf.inc |
Read the memory map information through the QemuFwCfg interface,
then build the page table through the memory map information,
and finally enable Mmu.
Signed-off-by: xianglai li
---
.../LoongArchQemuPkg/Include/Library/Cpu.h| 29 +
.../LoongArchQemuPkg/Include/Library/MmuLib.h | 85 ++
...
This library provides flash read and write functionality
and supports writing variables to flash.
Signed-off-by: xianglai li
---
.../QemuFlashFvbServicesRuntimeDxe/FvbInfo.c | 115 ++
.../FvbServicesRuntimeDxe.inf | 76 ++
.../FvbServicesSmm.inf| 70
Platform PEI module for LoongArch platform initialization.
Signed-off-by: xianglai li
---
.../Loongson/LoongArchQemuPkg/Loongson.dec| 22 ++
.../Loongson/LoongArchQemuPkg/Loongson.dsc| 66 -
.../Loongson/LoongArchQemuPkg/Loongson.fdf| 51
.../LoongArchQemuPkg/PlatformPei/
This library provides a delay interface and a timing interface.
Signed-off-by: xianglai li
---
.../Include/Library/StableTimer.h | 42 +++
.../Library/StableTimerLib/Count.S| 26 ++
.../Library/StableTimerLib/TimerLib.c | 262 ++
.../Library/Stab
This library provides interfaces related to restart and shutdown.
Signed-off-by: xianglai li
---
.../BaseResetSystemAcpiGed.c | 155 ++
.../BaseResetSystemAcpiGedLib.inf | 42 +++
.../DxeResetSystemAcpiGed.c | 270 ++
.../Dx
The Library provides Boot Manager interfaces.
Signed-off-by: xianglai li
---
.../PlatformBootManagerLib/PlatformBm.c | 760 ++
.../PlatformBootManagerLib/PlatformBm.h | 112 +++
.../PlatformBootManagerLib.inf| 78 ++
.../PlatformBootManagerLib/QemuKer
This driver produces Timer Architectural Protocol,
Registers a timer interrupt and initializes the timer.
Signed-off-by: xianglai li
---
.../Drivers/StableTimerDxe/Timer.c| 405 ++
.../Drivers/StableTimerDxe/Timer.h| 166 +++
.../Drivers/StableTimerDxe
Use a register to save PeiServicesTable pointer,
This lib Provides PeiServicesTable pointer saving
and retrieval services.
Signed-off-by: xianglai li
---
.../PeiServicesTablePointer.c | 78 +++
.../PeiServicesTablePointerLib.inf| 32
2 files c
Hello,
I am exploring a proposal to use GitHub PR for code review. Specifically
the last option listed in the following discussion:
https://github.com/tianocore/edk2/discussions/3017
I am using the edk2-codereview repository to try different ideas out
and to get feedback from the community
Thanks Mike and reviewers - 3171 is merged
On 9/8/2022 9:29 PM, Michael D Kinney wrote:
Michael,
You have all the reviews and commit messages are updated and you are a
maintainer.
So you are welcome to add push label.
Thanks,
Mike
-Original Message-
From: Michael Kubacki
Sent: Th
Reviewed-by: Michael D Kinney
> -Original Message-
> From: Michael Kubacki
> Sent: Tuesday, September 6, 2022 8:27 PM
> To: devel@edk2.groups.io
> Cc: Leif Lindholm ; Ard Biesheuvel
> ; Abner Chang ;
> Daniel Schaefer ; Sean Brogan
> ; Barkelew, Bret
> ; Kinney, Michael D
> ; Gao, Lim
Reviewed-by: Michael D Kinney
> -Original Message-
> From: mikub...@linux.microsoft.com
> Sent: Tuesday, September 6, 2022 10:06 PM
> To: devel@edk2.groups.io
> Cc: Sean Brogan ; Barkelew, Bret
> ; Kinney, Michael D
> ; Gao, Liming ; Wang,
> Jian J
> Subject: [PATCH v1 2/2] .azurepipe
Reviewed-by: Michael D Kinney
> -Original Message-
> From: devel@edk2.groups.io On Behalf Of Michael Kubacki
> Sent: Tuesday, September 6, 2022 8:19 PM
> To: devel@edk2.groups.io
> Cc: Barkelew, Bret ; Chiu, Chasel
> ; Gao, Liming
> ; Kinney, Michael D ;
> Desimone, Nathaniel L
> ; Sea
Michael,
You have all the reviews and commit messages are updated and you are a
maintainer.
So you are welcome to add push label.
Thanks,
Mike
> -Original Message-
> From: Michael Kubacki
> Sent: Thursday, September 8, 2022 6:03 PM
> To: devel@edk2.groups.io; Kinney, Michael D
> Cc:
The series has been pushed as 5f9e175~.. 4b2a5f4
-Original Message-
From: devel@edk2.groups.io On Behalf Of Nate DeSimone
Sent: Thursday, September 8, 2022 6:07 PM
To: devel@edk2.groups.io
Cc: Chiu, Chasel ; Chaganty, Rangasai V
; Oram, Isaac W ; Dong,
Eric ; Gao, Liming ; Benjamin
Dor
This library detects the type of PCH present on
the system to the granualarity level needed to
determine which GMBUS pins to use to access the
HDMI DDC I2C bus.
Cc: Chasel Chiu
Cc: Sai Chaganty
Cc: Isaac Oram
Cc: Benjamin Doron
Cc: Michael Kubacki
Cc: Jeremy Soller
Signed-off-by: Nate DeSimo
This library initializes any GPIOs necessary for
the HDMI DDC bus to operate. This can be called
very early (SEC phase) to enable closed chassis
debug through the HDMI DDC I2C bus.
Cc: Chasel Chiu
Cc: Sai Chaganty
Cc: Isaac Oram
Cc: Benjamin Doron
Cc: Michael Kubacki
Cc: Jeremy Soller
Signed
- Sets the terminal type GUID for ConIn, ConOut, and ConErr to the terminal
type indicated by PcdDefaultTerminalType.
- Some improvements to the comments in SerialPortTerminalLib
Cc: Chasel Chiu
Cc: Sai Chaganty
Cc: Isaac Oram
Cc: Eric Dong
Cc: Liming Gao
Cc: Benjamin Doron
Cc: Michael
Add new SerialPortLib implementation that routes log
messages over the I2C bus included in the integrated
graphics HDMI port. Normally this I2C bus is used to
read the EDID data from the monitor. An unintended
but useful property of this interface is that is does
not require DMA to perform I/O. Thi
Adds a board-specific implementation of SecBoardInitLib.
This implementation will invoke the GPIO initialization
routine for the HDMI DDC Bus if the HDMI DDC Bus is being
used for debug log output. Adds PCDs for enable/disable
of using HDMI DDC I2C Bus as a Serial Port.
Cc: Chasel Chiu
Cc: Sai Ch
Enables usage of the HDMI DDC I2C Bus SerialPortLib implementation
on the GalagoPro3 board.
Cc: Chasel Chiu
Cc: Sai Chaganty
Cc: Isaac Oram
Cc: Benjamin Doron
Cc: Michael Kubacki
Cc: Jeremy Soller
Signed-off-by: Nate DeSimone
---
.../GalagoPro3/OpenBoardPkg.dsc | 74 +
Changes in V3:
- Added new HdmiDebugPchDetectionLib to eliminate
duplicated code between I2cHdmiDebugSerialPortLib
and HdmiDebugGpioInitLib.
- Removed duplicated register definitions
- Removed commented out code
- Removed TODOs
Changes in V2:
- Use SerialPortTerminalLib from MinPlatform
The patch series has now received a R-b tag for each package. No content
changes were requested in v3.
I rebased the branch to edk2/master, added all v3 review tags, updated
Nickle's email address, and pushed the changes to update the PR -
https://github.com/tianocore/edk2/pull/3171.
The PR
For the series: Reviewed-by: Isaac Oram
-Original Message-
From: Desimone, Nathaniel L
Sent: Tuesday, September 6, 2022 11:28 PM
To: devel@edk2.groups.io
Cc: Chiu, Chasel ; Chaganty, Rangasai V
; Oram, Isaac W ; Dong,
Eric ; Gao, Liming ; Benjamin
Doron ; Kubacki, Michael
; Soller,
Reviewed-by: Michael D Kinney
Mike
> -Original Message-
> From: devel@edk2.groups.io On Behalf Of Michael Kubacki
> Sent: Thursday, September 8, 2022 9:28 AM
> To: Ni, Ray ; devel@edk2.groups.io
> Subject: Re: [edk2-devel] [PATCH v3 2/8] FatPkg/FatPei: Remove extraneous
> debug message
Still need this review.
Patch has been on list for over a month and changes one line of code.
On 9/6/2022 11:05 PM, Michael Kubacki wrote:
Hello Ray,
Can you please review this patch?
FatPkg is the only package missing a review on the series.
Thanks,
Michael
On 9/2/2022 6:22 PM, Michael Kub
On Thu, 8 Sept 2022 at 18:17, Michael D Kinney
wrote:
>
> Hi Ard,
>
> I saw this message from Mergify for the first time yesterday in a different
> sandbox.
>
> I will try closing the old PR and request Mergify to refresh the new one.
>
Ah right, I should have closed the old one - that makes sen
Hi Ard,
I saw this message from Mergify for the first time yesterday in a different
sandbox.
I will try closing the old PR and request Mergify to refresh the new one.
Mike
> -Original Message-
> From: Ard Biesheuvel
> Sent: Thursday, September 8, 2022 9:14 AM
> To: Kinney, Michael D
On Thu, 8 Sept 2022 at 18:00, Kinney, Michael D
wrote:
>
> If you look at timestamps, it shows that it failed to install cspell after 2
> hours.
>
> Can you resubmit and see if it happens again?
>
That gives me
⚠️ The sha of the head commit of this PR conflicts with #3315. Mergify
cannot evalua
If you look at timestamps, it shows that it failed to install cspell after 2
hours.
Can you resubmit and see if it happens again?
Mike
> -Original Message-
> From: Ard Biesheuvel
> Sent: Thursday, September 8, 2022 8:53 AM
> To: edk2-devel-groups-io ; Kinney, Michael D
> ; Michael Kub
On Thu, 8 Sept 2022 at 17:39, Jeff Brasen wrote:
>
>
>
> > -Original Message-
> > From: Ard Biesheuvel
> > Sent: Monday, August 15, 2022 8:42 AM
> > To: devel@edk2.groups.io; Jeff Brasen
> > Cc: hao.a...@intel.com; ray...@intel.com; quic_llind...@quicinc.com;
> > ardb+tianoc...@kernel.or
Could someone please take a look at
https://dev.azure.com/tianocore/edk2-ci/_build/results?buildId=61124&view=results
and see what's going wrong?
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#93528): https://edk2.groups.io/g/devel/mess
> -Original Message-
> From: Ard Biesheuvel
> Sent: Monday, August 15, 2022 8:42 AM
> To: devel@edk2.groups.io; Jeff Brasen
> Cc: hao.a...@intel.com; ray...@intel.com; quic_llind...@quicinc.com;
> ardb+tianoc...@kernel.org
> Subject: Re: [edk2-devel] [PATCH v2]
> MdeModulePkg/NonDiscove
From: Pierre Gondois
>From ACPI 5.1, s19.5.28 DefinitionBlock (Declare Definition Block):
Note: For compatibility with ACPI versions before
ACPI 2.0, the bit width of Integer objects is
dependent on the ComplianceRevision of the DSDT.
If the ComplianceRevision is less than 2, all
intege
Chao:
This is a big feature for UEFI 2.10. Is there one feature request in
https://bugzilla.tianocore.org/?
Thanks
Liming
发件人: lic...@loongson.cn
发送时间: 2022年9月8日 17:34
收件人: Chao Li ; devel
抄送: Ray Ni ; Liming Gao ; Michael D
Kinney ; Guomin Jiang ;
Wei6 Xu ; Maciej Rabeda ;
Jiaxin Wu
[AMD Official Use Only - General]
> -Original Message-
> From: Sunil V L
> Sent: Thursday, September 8, 2022 6:53 PM
> To: Chang, Abner
> Cc: devel@edk2.groups.io; Jian J Wang ; Liming Gao
> ; Eric Dong ; Ray Ni
> ; Rahul Kumar ; Debkumar De
> ; Catharine West ;
> Daniel Schaefer ; Lei
On 09/07/22 07:46, Gerd Hoffmann wrote:
> On Tue, Sep 06, 2022 at 01:59:23PM +0200, Ard Biesheuvel wrote:
>> Add some generic plumbing and wire it up for the QEMU based Ovmf
>> platform so that IPv4 and/or IPv6 networking can be turned off from the
>> QEMU command line.
>>
>> This is a follow-up to
On Wed, Sep 07, 2022 at 12:46:59PM +, Chang, Abner wrote:
> [AMD Official Use Only - General]
>
>
>
> > -Original Message-
> > From: Sunil V L
> > Sent: Wednesday, September 7, 2022 7:22 PM
> > To: Chang, Abner
> > Cc: devel@edk2.groups.io; Jian J Wang ; Liming Gao
> > ; Eric Dong
Hi All,The LoongArch code repo is in GitHub, REF: https://github.com/loongson/edk2/tree/LoongArch, there is a PR, URL: https://github.com/loongson/edk2/pull/1. Thanks,Chao--原始邮件发件人: lichao收件人: devel抄送: Ray Ni,Liming Gao,Michael D Kinney,Guomin
On Thu, Sep 08, 2022 at 12:48:05AM +, Xu, Min M wrote:
> On September 7, 2022 1:42 PM, Gerd Hoffmann wrote:
> > Hi,
> >
> > > + //
> > > + // This memory region is split into 2 parts. The left part is
> > > accepted.
> > > + //
> > > + PhysicalEnd= Ma
Hi Ard,
Thank you for this patch.
Reviewed-by: Sami Mujawar
Regards,
Sami Mujawar
On 07/09/2022, 16:28, "devel@edk2.groups.io on behalf of Ard Biesheuvel via
groups.io" wrote:
Don't allow spelling errors to break the CI build and inadvertently
reject pull requests - spelling is im
50 matches
Mail list logo
