Hi everyone,
I recently jumped back into working on the FDCAN driver for the STM32H7
and have something working which I would like to test further. In doing
so, I was hoping to easily debug with GDB through OpenOCD, but am having
some issues with the necessary setup. So far I have compiled and
Hi John,
you can follow the guide from Sony's wiki page and use OpenOCD master
branch from upstream repository.
Then you just need to configure OpenOCD to enable thread awareness by
adding the following line to you config file:
"stm32h7x.cpu0 configure -rtos nuttx"
Please, find attached an examp
Hi John,
On 8/27/20, John Rippetoe wrote:
> Hi everyone,
>
> I recently jumped back into working on the FDCAN driver for the STM32H7
> and have something working which I would like to test further. In doing
> so, I was hoping to easily debug with GDB through OpenOCD, but am having
> some issues w
It would be cool to add a guide for this in the documentation (could be under
"guides" in principle).
Best,
Matias
On Thu, Aug 27, 2020, at 18:29, Alan Carvalho de Assis wrote:
> Hi John,
>
> On 8/27/20, John Rippetoe wrote:
> > Hi everyone,
> >
> > I recently jumped back into working on the F
Gustavo,
Adding that line to my config appears to have done the trick! The info
for the work queue threads still appear a little garbled, but maybe that
is normal? Here is the output
(gdb) info threads
Id Target Id Frame
* 2 Thread 603982356 "" (Name: Idle Task, pid:0, RUNNING)
Alan,
Thanks for sending this! Gustavo's suggestion of adding the '-rtos
nuttx' flag to my config did the trick, so maybe this process isn't
needed anymore?
- John
On 8/27/20 5:29 PM, Alan Carvalho de Assis wrote:
Hi John,
On 8/27/20, John Rippetoe wrote:
Hi everyone,
I recently jumped
Hi John,
If the tcb_s values returned are the same from openocd header, then
you don't need to do anything. If they are different you need to
update, otherwise it will not work reliably.
BR,
Alan
On 8/27/20, John Rippetoe wrote:
> Alan,
>
> Thanks for sending this! Gustavo's suggestion of addi
Hi Alan and all,
Alan's comment is right.
Because openocd-nuttx needs to know about tcb_s members in NuttX to access
them.
and both values must be the same. Otherwise, openocd-nuttx does not work
correctly.
However, this procedure is sometimes annoying (even for me) if we are
debugging
multiple
Hi Secretary,
Here is the signed SGA for donating the source files owned by Xiaomi of
Apache NuttX[1].
Please see the attached file.
You may find out that the copyright of these files is 'Pinecone Inc.'.
'Pinecone Inc.' is a wholly-owned subsidiary of Xiaomi so there is no
problem.
Best regards
