Hi,
Thanks for investigating the issue and proposing a fix!
On 10/10/23 04:08, liufengjiang.0426 wrote:
When the packets is sent in packed mode, and the packets data and
virtio-header are divided into two desc, set the next flag of
virtio-header desc
Fix the warning that a single line of comm
> Hi Chaoyong,
>
> some comments as below.
>
>
> 在 2023/10/8 9:50, Chaoyong He 写道:
> > From: Long Wu
> >
> > Bonding PMD does not let member ports know the bonding port's
> > information, like how many member ports the bonding port has, what
> > mode the bonding port is in and so on.
> >
> >
On 10/5/23 21:49, Nicolas Chautru wrote:
New implementation for some of the FEC features
specific to the VRB2 variant.
Signed-off-by: Nicolas Chautru
---
drivers/baseband/acc/rte_vrb_pmd.c | 370 +
1 file changed, 328 insertions(+), 42 deletions(-)
diff --git
On 10/6/23 22:08, Chautru, Nicolas wrote:
Hi Maxime,
-Original Message-
From: Maxime Coquelin
Sent: Friday, October 6, 2023 12:54 AM
To: Chautru, Nicolas ; dev@dpdk.org
Cc: hemant.agra...@nxp.com; david.march...@redhat.com; Vargas, Hernan
Subject: Re: [PATCH v5 01/12] bbdev: add FF
On 10/6/23 09:55, Maxime Coquelin wrote:
On 10/5/23 21:48, Nicolas Chautru wrote:
This allows to expose the FFT window width being introduced in
previous commit based on what is configured dynamically on the
device platform.
Signed-off-by: Nicolas Chautru
---
drivers/baseband/acc/acc_co
On Fri, Sep 29, 2023 at 12:38 PM Maxime Coquelin
wrote:
>
> Guest notifications offloading, which has been introduced
> in v23.07, aims at offloading syscalls out of the datapath.
>
> This patch optimizes the offloading by not offloading the
> guest notification for a given virtqueue if one is alr
On Mon, Oct 9, 2023 at 6:24 PM Patrick Robb wrote:
>
> Recheck-request: iol-unit-amd64-testing
>
> Failed for service_autotest on windows. I'm doing a retest to see if it's
> reproducible.
Thanks for checking.
This unit test has never been entirely reliable... I see the rerun was fine.
I'll go a
Hello Siva,
On Mon, Oct 9, 2023 at 4:06 PM Sivaprasad Tummala
wrote:
>
> mwaitx allows EPYC processors to enter a implementation dependent
> power/performance optimized state (C1 state) for a specific period
> or until a store to the monitored address range.
>
> Signed-off-by: Sivaprasad Tummala
On 10/5/23 04:18, Nicolas Chautru wrote:
Support for the FFT the processing specific to the
VRB2 variant.
Signed-off-by: Nicolas Chautru
---
drivers/baseband/acc/rte_vrb_pmd.c | 137 +++--
1 file changed, 129 insertions(+), 8 deletions(-)
Reviewed-by: Maxime Coq
Hi,
> -Original Message-
> From: Itamar Gozlan
> Sent: Monday, September 18, 2023 3:07 PM
> To: Alex Vesker ; Slava Ovsiienko
> ; NBU-Contact-Thomas Monjalon (EXTERNAL)
> ; Suanming Mou ; Matan
> Azrad ; Ori Kam
> Cc: dev@dpdk.org
> Subject: [PATCH 1/5] net/mlx5/hws: add support for matc
On Mon, Oct 9, 2023 at 4:55 PM Sivaprasad Tummala
wrote:
>
> amd-pstate introduces a new CPU frequency control mechanism for AMD
> EPYC processors using the ACPI Collaborative Performance Power Control
> feature for a finer grained frequency management.
>
> Patch to add support for amd-pstate driv
On Wed, Oct 4, 2023 at 2:06 PM Morten Brørup wrote:
>
> > From: Mattias Rönnblom [mailto:mattias.ronnb...@ericsson.com]
> > Sent: Wednesday, 4 October 2023 12.55
> random: clarify PRNG MT safety guarantees
> >
> > Clarify MT safety guarantees for unregistered non-EAL threads calling
> > PRNG funct
On Mon, Oct 9, 2023 at 4:33 PM Bruce Richardson
wrote:
>
> On Sat, Oct 07, 2023 at 03:36:34PM +0800, Jieqiang Wang wrote:
> > __mm_cmpeq_epi16 returns 0x if the corresponding 16-bit elements are
> > equal. In original SSE2 implementation for function compare_signatures,
> > it utilizes _mm_mov
On 8/8/2023 11:00 AM, Gregory Etelson wrote:
> Indirect list API defines 2 types of action update:
> • Action mutable context is always shared between all flows
> that referenced indirect actions list handle.
> Action mutable context can be changed by explicit invocation
> of indirect handle
On 9/21/2023 4:45 PM, Ferruh Yigit wrote:
> On 9/19/2023 11:05 AM, Ori Kam wrote:
>> Hi Bing
>>
>>> -Original Message-
>>> From: Bing Zhao
>>> Sent: Friday, August 11, 2023 5:07 PM
>>> Subject: [RFC PATCH] ethdev: introduce NAT64 action
>>>
>>> In order to support the communication between
PCI device ID is added for NVIDIA TU102GL [Quadro RTX 6000/8000]
GPU card.
Signed-off-by: Levend Sayar
---
drivers/gpu/cuda/cuda.c| 4
drivers/gpu/cuda/devices.h | 1 +
2 files changed, 5 insertions(+)
diff --git a/drivers/gpu/cuda/cuda.c b/drivers/gpu/cuda/cuda.c
index a552aabeb8..001
Sounds good to me
Thanks
EA
From: Levend Sayar
Sent: Tuesday, October 10, 2023 12:02
To: Elena Agostini
Cc: dev@dpdk.org ; Levend Sayar
Subject: [PATCH] gpu/cuda: add PCI device ID for NVIDIA TU102GL [Quadro RTX
6000/8000]
PCI device ID is added for NVIDIA TU
09.10.2023 15:05, Sivaprasad Tummala пишет:
mwaitx allows EPYC processors to enter a implementation dependent
power/performance optimized state (C1 state) for a specific period
or until a store to the monitored address range.
Signed-off-by: Sivaprasad Tummala
Acked-by: Anatoly Burakov
---
li
On 9/8/2023 4:49 AM, Suanming Mou wrote:
> Currently, get TCP/IP header or data length information from traffic
> is missing in the modify field IDs. This commit adds the missing
> TCP data_offset, IPv4 IHL/total_len, IPv6 payload_len to modify filed
> IDs. This allows users be able to manager more
Add alternate datapath API for security processing which would do Rx
injection (similar to loopback) after successful security processing.
With inline protocol offload, variable part of the session context
(AR windows, lifetime etc in case of IPsec), is not accessible to the
application. If packet
From: Vidya Sagar Velumuri
Add test to verify Rx inject. The test case added would push a known
vector to cryptodev which would be injected to ethdev Rx. The test
case verifies that the packet is received from ethdev Rx and is
processed successfully. It also verifies that the userdata matches wit
On 10/7/2023 11:47 AM, Qi Zhang wrote:
> Parsing command line for rte_flow_action_prog.
>
> Syntax:
>
> "prog name [arguments \
>... end]"
>
Can you please put full rte flow command in the commit log? Like what is
the 'pattern' for above command?
> Use parse_string0 to parse name strin
On 8/22/2023 2:13 AM, Zhang, Yuying wrote:
> From: Yuying Zhang
>
> Refine vxlan encap content of all protocol headers.
>
> Fixes: 1960be7d32f8 ("app/testpmd: add VXLAN encap/decap")
> Cc: sta...@dpdk.org
>
> Signed-off-by: Yuying Zhang
>
Ori, Aman, ping for review.
On 9/26/2023 12:37 PM, Ori Kam wrote:
> rte_flow supports insert by index table[1].
>
> Using the above table, the application can create rules
> that are based on hash.
> For example application can create the following logic in order
> to create load balancing:
> 1. Create insert by index table
On 10/9/2023 5:24 PM, Alexander Kozyrev wrote:
> Add RTE_FLOW_ITEM_TYPE_PTYPE to allow matching on
> L2/L3/L4 and tunnel information as defined in mbuf.
>
> To match on RTE_PTYPE_L4_TCP and RTE_PTYPE_INNER_L4_UDP:
> flow pattern_template 0 create pattern_template_id 1
> ingress template ptyp
Hi Ferruh,
> -Original Message-
> From: Ferruh Yigit
> Sent: Tuesday, October 10, 2023 2:06 PM
>
> On 9/26/2023 12:37 PM, Ori Kam wrote:
> > rte_flow supports insert by index table[1].
> >
> > Using the above table, the application can create rules
> > that are based on hash.
> > For exa
On Mon, Oct 9, 2023 at 8:22 PM Mattias Rönnblom
wrote:
> +static int
> +test_dispatcher(void)
> +{
> + return unit_test_suite_runner(&test_suite);
> +}
> +
> +REGISTER_FAST_TEST(dispatcher_autotest, false, true, test_dispatcher);
Since this test expects some lcores, wdyt of adding:
@@ -104
On 10/4/2023 11:07 AM, Selwin Sebastian wrote:
> Using root complex to identify cpu will not work for vm passthrough.
> CPUID is used to get family and modelid to identify cpu
>
> Fixes: b0db927b5eba ("net/axgbe: use PCI root complex device to distinguish
> device")
> Cc: sta...@dpdk.org
>
> Sig
On 10/4/2023 1:59 PM, Nithin Dabilpuram wrote:
> Add IPsec event subtype range for PMD specific code in order
> to accommodate wide range of errors that PMD supports.
> These IPsec event subtypes are used when an error doesn't
> match the spec defined subtypes between RTE_ETH_EVENT_IPSEC_UNKNOWN
>
On Mon, Oct 9, 2023 at 8:23 PM Mattias Rönnblom
wrote:
[snip]
> +A module may use more than one event handler, for convenience or to
> +further decouple sub-modules. However, the dispatcher may impose an
> +upper limit of the number handlers. In addition, installing a large
> +number of handlers
[AMD Official Use Only - General]
Hi Ferruh,
Thank you. Yes, once David's patch is accepted, I will make changes to use new
API.
Regards
Selwin
-Original Message-
From: Yigit, Ferruh
Sent: Tuesday, October 10, 2023 6:24 PM
To: Sebastian, Selwin ; dev@dpdk.org
Cc: sta...@dpdk.org; David
On 10/5/2023 9:52 PM, Ed Czeck wrote:
> features and function have been removed from FPGA firmware
>
I am always a little confused how you manage the deployment, if a
customer requires RQ pacing, how you manage it, at least should it be
documented in driver documentation that RQ pacing supported
Trying to call rte_event_maintain out of the eventdev library triggers
a link failure, as the tracepoint symbol associated to this inline
helper was not exported.
Fixes: 54f17843a887 ("eventdev: add port maintenance API")
Cc: sta...@dpdk.org
Signed-off-by: David Marchand
---
Caught by the CI whe
On Mon, Oct 9, 2023 at 8:22 PM Mattias Rönnblom
wrote:
>
> Add unit tests for the dispatcher.
Fyi, this patch is the first external user of rte_event_maintain and
it revealed an issue:
http://mails.dpdk.org/archives/test-report/2023-October/475671.html
I sent a fix, can you have a look?
https://
Hello,
As you probably know, the videos of the summit are online:
https://www.youtube.com/playlist?list=PLo97Rhbj4ceJf9p-crjGvGvn8pMWrJ_cV
You can find the group photo from Dublin here:
http://fast.dpdk.org/events/images/DPDK-2023-09-Ireland-group-6.jpg
and more in http://fast.dpdk.org/events/im
On 10/5/23 21:49, Nicolas Chautru wrote:
Support for the FFT the processing specific to the
VRB2 variant.
Signed-off-by: Nicolas Chautru
---
drivers/baseband/acc/rte_vrb_pmd.c | 146 +++--
1 file changed, 119 insertions(+), 27 deletions(-)
Reviewed-by: Maxime Co
rte_flow supports insert by index table[1].
Using the above table, the application can create rules
that are based on hash.
For example application can create the following logic in order
to create load balancing:
1. Create insert by index table with 2 rules, that hashes based on dmac
2. Insert to
From: John Romein
This patch reduces the time to allocate and register tens of gigabytes
of GPU memory from hours to seconds, by sorting the heap only once
instead of for each object in the mempool.
Fixes: 690b2a88c2f7 ("common/mlx5: add mempool registration facilities")
Signed-off-by: John Rom
> On 10/4/2023 1:59 PM, Nithin Dabilpuram wrote:
> > Add IPsec event subtype range for PMD specific code in order
> > to accommodate wide range of errors that PMD supports.
> > These IPsec event subtypes are used when an error doesn't
> > match the spec defined subtypes between
> RTE_ETH_EVENT_IPSE
Hi Ferruh,
>
> --
> On 10/4/2023 1:59 PM, Nithin Dabilpuram wrote:
> > Add IPsec event subtype range for PMD specific code in order to
> > accommodate wide range of errors that PMD supports.
> > These IPsec event subtypes are use
On Tue, Oct 10, 2023 at 9:51 AM Ferruh Yigit wrote:
>
> On 10/5/2023 9:52 PM, Ed Czeck wrote:
> > features and function have been removed from FPGA firmware
> >
>
> I am always a little confused how you manage the deployment, if a
> customer requires RQ pacing, how you manage it, at least should i
Add AMD EPYC SoC tuning guide as new setcion of linux getting
started guide.
Signed-off-by: Vipin Varghese
---
doc/guides/linux_gsg/amd_platform.rst | 63 +++
doc/guides/linux_gsg/index.rst| 1 +
2 files changed, 64 insertions(+)
create mode 100644 doc/guides/li
Add AMD EPYC SoC tuning guide as new setcion of linux getting
started guide.
Signed-off-by: Vipin Varghese
---
doc/guides/linux_gsg/amd_platform.rst | 63 +++
doc/guides/linux_gsg/index.rst| 1 +
2 files changed, 64 insertions(+)
create mode 100644 doc/guides/li
On Fri, 6 Oct 2023 20:09:09 +
Sam Andrew wrote:
> Add support for changing the netvsc MTU. The MTU can only be set at nvs
> initialization, therefore to change the MTU the underlying vmbus
> channel(s) are torn down and the vmbus device unmapped and remapped. The
> existing rx and tx queue(s)
features and function have been removed from FPGA firmware
Signed-off-by: Ed Czeck
---
v2:
* restore previously incorrectly deleted line
---
drivers/net/ark/ark_ethdev.c | 60 ---
drivers/net/ark/ark_global.h | 3 --
drivers/net/ark/ark_rqp.c| 70
In the contributor guide, it was said that no need to Cc maintainers
for new additions, probably for new directories not having a maintainer.
There is no harm, and it is a good habit, to always Cc maintainers.
Remove this case as it can mislead to not Cc maintainers when needed.
Signed-off-by: Th
On 10/10/2023 5:08 PM, Ed Czeck wrote:
> features and function have been removed from FPGA firmware
>
> Signed-off-by: Ed Czeck
> ---
> v2:
> * restore previously incorrectly deleted line
>
Can you please send v2 of whole set, this helps on CI checks and back
tracing via patchwork etc...
> -Original Message-
> From: Anoob Joseph
> Sent: Tuesday, October 10, 2023 4:02 PM
> To: Akhil Goyal ; Jerin Jacob Kollanukkaran
> ; Konstantin Ananyev
> Cc: Hemant Agrawal ; dev@dpdk.org; Vidya Sagar
> Velumuri ; david.co...@intel.com; kai...@intel.com;
> kevin.osulli...@intel.com; C
Upstreaming SDK workaround for ACC100 and updating documentation for new SDK
release.
Hernan Vargas (2):
baseband/acc: support ACC100 deRM corner case SDK
doc: update FlexRAN SDK links
doc/guides/bbdevs/turbo_sw.rst| 53 +---
drivers/baseband/acc/meson.build
Implement de-ratematch pre-processing for ACC100 SW corner cases.
Some specific 5GUL FEC corner cases may cause unintended back pressure
and in some cases a potential stability issue on the ACC100.
The PMD can detect such code block configuration and issue an info
message to the user.
Signed-off-b
Update FlexRAN SDK module link to use FEC_SDK_23.07.
Update compiler links to use ICX.
Update build SDK build instructions.
Signed-off-by: Hernan Vargas
---
doc/guides/bbdevs/turbo_sw.rst | 53 +++---
1 file changed, 30 insertions(+), 23 deletions(-)
diff --git a/doc
Add support for changing the netvsc MTU. The MTU can only be set at nvs
initialization, therefore to change the MTU the underlying vmbus
channel(s) are torn down and the vmbus device unmapped and remapped. The
existing rx and tx queue(s) are reconnected to the new vmbus channel(s).
Signed-off-by:
> Subject: [PATCH v3] net/netvsc: add support for mtu_set
>
> Add support for changing the netvsc MTU. The MTU can only be set at nvs
> initialization, therefore to change the MTU the underlying vmbus
> channel(s) are torn down and the vmbus device unmapped and remapped. The
> existing rx and tx q
26/09/2023 07:58, Tejasree Kondoj:
> From: Anoob Joseph
>
> Add crypto RAW API support in cnxk PMD
> Enable the flag to allow execution of raw test suite.
>
> Signed-off-by: Vidya Sagar Velumuri
> Signed-off-by: Anoob Joseph
> ---
> doc/guides/cryptodevs/features/cn10k.ini | 1 +
> drivers
v6: removed one empty line typo.
Thanks
v5: missed a line in v4 patch 2/12.
change to 9/12 with suggested refactor.
v4: updates based on Maxime's suggestions:
- FFT windowing exposure tweaked to show number of windows
as well in capacity to be more generic and future-proof.
- few code ref
This exposes the width of each windowing shape being configured on
the device. This allows to distinguish different version of the
flexible pointwise windowing applied to the FFT and expose
this platform configuration to the application.
This also add the total number of windows supported in the ca
This allows to expose the FFT window width being introduced in
previous commit based on what is configured dynamically on the
device platform.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/acc_common.h | 5
drivers/baseband/acc/rte_vrb_pmd.c | 41 ++
This removes the specific capability and support of LTE Decoder
Soft Output option on the VRB1 PMD.
This is triggered as a vendor decision to defeature the related optional
capability so that to avoid theoretical risk of race conditions
impacting the device reliability. That optional APP LLR outpu
This allows more flexibility to the FCW size for the
unified driver. No actual functional change.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/acc_common.h | 4 +++-
drivers/baseband/acc/rte_vrb_pmd.c | 25 -
2 files changed, 27
There is no functionality related to the MLD operation
but allows the unified PMD to support the operation
being added moving forward.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/acc_common.h | 1 +
drivers/baseband/acc/rte_vrb_pmd.c | 39 +
Adding a few functions and common code prior to
extending the VRB driver.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/acc_common.h | 175 ++---
drivers/baseband/acc/rte_vrb_pmd.c | 58 +-
2 files changed, 190 insertions(
No functionality exposed only device enumeration and
configuration.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
doc/guides/bbdevs/features/vrb2.ini| 14 ++
doc/guides/bbdevs/index.rst| 1 +
doc/guides/bbdevs/vrb2.rst | 206 +
New implementation for some of the FEC features
specific to the VRB2 variant.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/rte_vrb_pmd.c | 370 +
1 file changed, 328 insertions(+), 42 deletions(-)
diff --git a/drivers/baseband
Support for the FFT the processing specific to the
VRB2 variant.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/rte_vrb_pmd.c | 146 +++--
1 file changed, 119 insertions(+), 27 deletions(-)
diff --git a/drivers/baseband/acc/rte_vrb_
Adding the capability for the MLD-TS processing specific to
the VRB2 variant.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/rte_vrb_pmd.c | 374 +
1 file changed, 374 insertions(+)
diff --git a/drivers/baseband/acc/rte_vrb_pmd.
Adding missing incremental functionality for the VRB2
variant. Notably detection of engine error during the
dequeue. Minor cosmetic edits.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/rte_vrb_pmd.c | 19 ---
drivers/baseband/acc/vrb1_pf_e
This allows to configure the VRB2 device using a
companion configuration function within the DPDK
bbdev-test environment.
Signed-off-by: Nicolas Chautru
Reviewed-by: Maxime Coquelin
---
drivers/baseband/acc/acc100_pmd.h | 2 +
drivers/baseband/acc/rte_acc100_pmd.c | 6 +-
drivers/baseba
Adding more information in bbdev documentation related to the
bbdev device discovery from info_get which was not very verbose so far.
Notably for FEC and FFT operations which have extra parameters to
manage different implementation variants.
Also use code snippet to refer to info structure and kee
Adding more context and information related the data exposed
through device discovery notably for FEC and FFT operations.
Signed-off-by: Nicolas Chautru
---
doc/guides/prog_guide/bbdev.rst | 60 -
lib/bbdev/rte_bbdev.h | 6
2 files changed, 57 inse
Support the creation of multiple ports from one ark device via
the use of ark pmd extension. I.e., one device with q queue can
seen a p ports each with q/p queues.
Add unique dev_private data for each port to manage queue assignment.
This patch repairs a latent issue uncovered during testing.
Fi
features and function have been removed from FPGA firmware
Signed-off-by: Ed Czeck
---
v2:
* restore previously incorrectly deleted line
---
drivers/net/ark/ark_ethdev.c | 60 ---
drivers/net/ark/ark_global.h | 3 --
drivers/net/ark/ark_rqp.c| 70
Allow for non-standard dataroom sizes for upstream data
motion when using a custom mbuf pool.
- New firmware version for UDM (Upstream Data Mover)
- New layout on ark_rx_meta data
Signed-off-by: Ed Czeck
---
doc/guides/nics/ark.rst | 1 +
drivers/net/ark/ark_ethdev_rx.c | 8
dr
IBM POWER systems support more than one type of memory management unit
(MMU). The Power ISA 3.0 specification, which applies to P9 and later
CPUs, defined a new Radix MMU which, among other things, allows an
anonymous memory page mapping to be converted into a hugepage mapping
at a specific addres
Hi,
> -Original Message-
> From: Ferruh Yigit
> Sent: Tuesday, October 10, 2023 6:24 PM
> To: Suanming Mou ; Ori Kam ;
> Aman Singh ; Yuying Zhang
> ; NBU-Contact-Thomas Monjalon (EXTERNAL)
> ; Andrew Rybchenko
>
> Cc: dev@dpdk.org
> Subject: Re: [PATCH v2] ethdev: add TCP/IP modify fiel
This series adds new fastpath routines for cn10k & cn9k endpoint
devices and supports 32B Tx desciptor format which improves the
performance.
Shijith Thotton (1):
net/octeon_ep: support 32B IQ descriptor size
Vamsi Attunuru (2):
net/octeon_ep: clean up receive routine
net/octeon_ep: add new
From: Shijith Thotton
Update input queue setup to consider descriptor size in driver conf.
The default instruction size for otx2 and cnxk devices has been updated
to 32 bytes.
Signed-off-by: Shijith Thotton
---
drivers/net/octeon_ep/cnxk_ep_vf.c| 10 +-
drivers/net/octeon_ep/otx2_e
Patch improves Rx routine and pkt count update routines,
packet count update routines need to drain inflight ISM
memory updates while decrementing the packet count register.
Signed-off-by: Vamsi Attunuru
---
drivers/net/octeon_ep/otx_ep_rxtx.c | 162
1 file changed,
Adds new fastpath routines for cn10k & cn9k endpoint
devices and assigns the fastpath routines based on
the offload flags.
Patch also adds misc changes to improve performance
and code-readability.
Signed-off-by: Vamsi Attunuru
---
drivers/net/octeon_ep/cnxk_ep_rx.c| 309
Acked-by: Chengwen Feng
On 2023/10/11 0:26, Thomas Monjalon wrote:
> In the contributor guide, it was said that no need to Cc maintainers
> for new additions, probably for new directories not having a maintainer.
> There is no harm, and it is a good habit, to always Cc maintainers.
>
> Remove th
Hi,
On 2023/10/10 19:05, Ferruh Yigit wrote:
> On 9/26/2023 12:37 PM, Ori Kam wrote:
>> rte_flow supports insert by index table[1].
>>
>> Using the above table, the application can create rules
>> that are based on hash.
>> For example application can create the following logic in order
>> to crea
> -Original Message-
> From: Ferruh Yigit
> Sent: Tuesday, October 10, 2023 6:49 PM
> To: Zhang, Qi Z ; Singh, Aman Deep
> ; Zhang, Yuying
> Cc: dev@dpdk.org; Dumitrescu, Cristian ;
> or...@nvidia.com
> Subject: Re: [PATCH v4] app/testpmd: enable cli for programmable action
>
> On 10/7/
From: Beilei Xing
Update the cpchnl2 function type according to the definition in
MEV 1.0 release.
Signed-off-by: Beilei Xing
---
drivers/net/cpfl/cpfl_cpchnl.h | 19 ++-
drivers/net/cpfl/cpfl_ethdev.h | 2 +-
drivers/net/cpfl/cpfl_representor.c | 20 ++--
Parsing command line for rte_flow_action_prog.
Syntax:
"prog name [arguments \
... end]"
Use parse_string0 to parse name string.
Use parse_hex to parse hex string.
Use struct action_prog_data to store parsed result.
Example:
Action with 2 arguments:
"prog name action0 arguments field0 0
Parsing command line for rte_flow_action_prog.
Syntax:
"prog name [arguments \
... end]"
Use parse_string0 to parse name string.
Use parse_hex to parse hex string.
Use struct action_prog_data to store parsed result.
Example:
Action with 2 arguments:
"prog name action0 arguments field0 0
From: Beilei Xing
Update recommended matching list for idpf PMD and cpfl PMD.
Signed-off-by: Beilei Xing
---
doc/guides/nics/cpfl.rst | 2 ++
doc/guides/nics/idpf.rst | 2 ++
2 files changed, 4 insertions(+)
diff --git a/doc/guides/nics/cpfl.rst b/doc/guides/nics/cpfl.rst
index ae5487f2f6..54
On 2023-10-10 13:56, David Marchand wrote:
On Mon, Oct 9, 2023 at 8:22 PM Mattias Rönnblom
wrote:
+static int
+test_dispatcher(void)
+{
+ return unit_test_suite_runner(&test_suite);
+}
+
+REGISTER_FAST_TEST(dispatcher_autotest, false, true, test_dispatcher);
Since this test expects some
This patch uses the temp variable to check the current action type,
to avoid overlap the sample action following the decap.
Fixes: 7356aec64c48 ("net/mlx5: fix mirror flow split with L3 encapsulation")
Cc: sta...@dpdk.org
Signed-off-by: Jiawei Wang
Acked-by: Suanming Mou
---
drivers/net/mlx5/
On 2023-10-10 15:31, David Marchand wrote:
On Mon, Oct 9, 2023 at 8:23 PM Mattias Rönnblom
wrote:
[snip]
+A module may use more than one event handler, for convenience or to
+further decouple sub-modules. However, the dispatcher may impose an
+upper limit of the number handlers. In addition,
From: Xueming Li
In BlueField, a new firmware configuration option NUM_OF_PF=0 disables
PF on the x86 host side, no HPF on the ARM side, and the only RDMA port
on the ARM side is the bonding device(PF0). A device probe with devargs
of representor=pf[0-1]vf[...] will probe PF0 and PF1 one by one,
The port action and jump to flow table action are not supported
in the mirror flows (RTE_FLOW_ACTION_TYPE_SAMPLE with sample ratio=1)
in E-Switch domain (transfer attribute set) without presented encap
action.
The encap action is supported for uplink port only. So, if flow with
mirroring contains
On 2023-10-10 16:02, David Marchand wrote:
On Mon, Oct 9, 2023 at 8:22 PM Mattias Rönnblom
wrote:
Add unit tests for the dispatcher.
Fyi, this patch is the first external user of rte_event_maintain and
it revealed an issue:
http://mails.dpdk.org/archives/test-report/2023-October/475671.html
On 2023-10-10 16:00, David Marchand wrote:
Trying to call rte_event_maintain out of the eventdev library triggers
a link failure, as the tracepoint symbol associated to this inline
helper was not exported.
Fixes: 54f17843a887 ("eventdev: add port maintenance API")
Cc: sta...@dpdk.org
Signed-off
On Tue, Oct 10, 2023 at 7:30 PM David Marchand
wrote:
>
> Trying to call rte_event_maintain out of the eventdev library triggers
> a link failure, as the tracepoint symbol associated to this inline
> helper was not exported.
>
> Fixes: 54f17843a887 ("eventdev: add port maintenance API")
> Cc: sta.
93 matches
Mail list logo
