On Thu, 4 Feb 2016 00:41:00 +
"Zhang, Helin" wrote:
> > -Original Message-
> > From: Julien Meunier [mailto:julien.meunier at 6wind.com]
> > Sent: Wednesday, February 3, 2016 7:32 PM
> > To: Zhang, Helin
> > Cc: dev at dpdk.org
> > Subject: Re: [PATCH v2] i40e: fix vlan filtering
> >
2016-02-04 00:41, Zhang, Helin:
> From: Julien Meunier [mailto:julien.meunier at 6wind.com]
> > INFO log level is used in order to keep code homogeneity:
> > i40e_vsi_config_vlan_stripping or i40e_dev_init_vlan use this log level
> > during
> > failure for example.
> >
> > Tell me if ERR log leve
> -Original Message-
> From: Julien Meunier [mailto:julien.meunier at 6wind.com]
> Sent: Wednesday, February 3, 2016 7:32 PM
> To: Zhang, Helin
> Cc: dev at dpdk.org
> Subject: Re: [PATCH v2] i40e: fix vlan filtering
>
> Hello,
>
> INFO log level is used in order to keep code homogenei
Hello,
INFO log level is used in order to keep code homogeneity:
i40e_vsi_config_vlan_stripping or i40e_dev_init_vlan use this log level
during failure for example.
Tell me if ERR log level for VLAN filtering issue must be set.
On 02/03/2016 02:15 AM, Zhang, Helin wrote:
>
>> -Original Mes
> -Original Message-
> From: Julien Meunier [mailto:julien.meunier at 6wind.com]
> Sent: Tuesday, February 2, 2016 9:51 PM
> To: Zhang, Helin
> Cc: dev at dpdk.org
> Subject: [PATCH v2] i40e: fix vlan filtering
>
> VLAN filtering was always performed, even if hw_vlan_filter was disabled
VLAN filtering was always performed, even if hw_vlan_filter was
disabled. During device initialization, default filter
RTE_MACVLAN_PERFECT_MATCH was applied. In this situation, all incoming
VLAN frames were dropped by the card (increase of the register RUPP - Rx
Unsupported Protocol).
In order to
6 matches
Mail list logo
