The rx queue must config as ceq disable, and must set msix
state disable. Otherwise when lro is enable, there will be
problems with packet aggregation because of firmware.
Fixes: 9d02f40d6503 ("net/hinic: fix LRO")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/
HINIC_MAX_JUMBO_FRAME_SIZE
to calculate eth_overhead, so mtu will be inconsistent in the driver and
firmware.
Fixes: e542ab51ab27 ("net/hinic: fix jumbo frame flag condition for MTU set")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/base/hinic_pmd_niccfg.h | 9
If the vlan id 0 is deleted for hinic, all packets without
vlan will be discarded when the vlan filter is turned on.
Fixes: 50ce3e7aec8f ("ethdev: fix VLAN offloads set if no relative
capabilities")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/hinic_pmd_et
the problem of MTU inconsistent
Guoyang Zhou (3):
net/hinic: increase the protection of the VLAN
net/hinic/base: fix the problem of LRO
net/hinic: fix the problem of MTU inconsistent
drivers/net/hinic/base/hinic_pmd_niccfg.h | 9 -
drivers/net/hinic/base/hinic_pmd_nicio.c | 4
Some apps, such as fstack, will use secondary process to access the
memory of eth_dev_ops, and they want to get the info of dev, but hinic
driver does not initialized it when in secondary process.
Fixes: 66f64dd6dc86 ("net/hinic: fix secondary process")
Cc: sta...@dpdk.org
Signed-off-b
Some apps, such as fstack, will use secondary process to access the
memory of eth_dev_ops, and they want to get the info of dev, but hinic
driver does not initialized it when in secondary process.
--
v1->v2:
- modify the patch title
v1:
- fix coredump when PMD used by fstack
Guoyang Zhou
The fstack will use secondary process to access the memory of
eth_dev_ops , and it wants to get the info of dev, but hinic
driver does not initialized it when in secondary process.
Fixes: 66f64dd6dc86 ("net/hinic: fix secondary process")
Cc: sta...@dpdk.org
Signed-off-by: Gu
Hi ferruh,
I hope that these two patches can be applied.
Because in that way, the version can be stable.
Thanks,
Guoyang zhou
在 2020/11/24 17:31, Ferruh Yigit 写道:
On 11/23/2020 4:09 PM, Ferruh Yigit wrote:
On 11/23/2020 1:12 PM, Guoyang Zhou wrote:
The maximum number of queues on the chip
.@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/base/hinic_pmd_niccfg.c | 38 ---
drivers/net/hinic/base/hinic_pmd_niccfg.h | 2 --
drivers/net/hinic/hinic_pmd_ethdev.c | 14
3 files changed, 54 deletions(-)
diff --git a/drivers/net/
org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/base/hinic_pmd_nicio.c | 5 -
1 file changed, 5 deletions(-)
diff --git a/drivers/net/hinic/base/hinic_pmd_nicio.c
b/drivers/net/hinic/base/hinic_pmd_nicio.c
index 2736305..162308b 100644
--- a/drivers/net/hinic/base/hinic_pmd_nicio.c
+++
to kernel, it will be linked failed.
--
v1->v2:
- add some necessary comments for patches
- correct fixed patch id
v1:
- remove the limitation for max queue num
- remove the operation of optical modules in the link function
Guoyang Zhou (2):
net/hinic/base: remove the limitation
In the link up and link down functions, they do not need
to operate the optical module.
Fixes: 511b7371d32b ("net/hinic: fix hugepage memory leaks")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/base/hinic_pmd_niccfg.c | 38 ---
d
The maximum number of queues on the chip can be any value
greater than 0, it does not have to be the power of two.
Fixes: 511b7371d32b ("net/hinic: fix hugepage memory leaks")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/base/hinic_pmd_nicio.c | 5 -
1 fi
Guoyang Zhou (2):
net/hinic/base: remove the limitation for max queue num
net/hinic: remove the operation of optical modules
drivers/net/hinic/base/hinic_pmd_niccfg.c | 38 ---
drivers/net/hinic/base/hinic_pmd_niccfg.h | 2 --
drivers/net/hinic/base
d queue
xstats")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
v2:
- correct the incorrect words in the comments.
---
drivers/net/hinic/base/hinic_pmd_nicio.c | 1 -
drivers/net/hinic/hinic_pmd_ethdev.c | 17 -
2 files changed, 8 insertions(+), 10 deletions(-)
diff
d queue
xstats")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/base/hinic_pmd_nicio.c | 1 -
drivers/net/hinic/hinic_pmd_ethdev.c | 17 -
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/hinic/base/hinic_pmd_nicio.c
b/drivers/ne
The nic_io memory sets to NULL before free it, this is wrong, and
the freeing of some private port resources should be moved from the
".remove(device)" function to the ".dev_close(port)" function.
--
v1:
- fix the problem of hugepage memory leaks
Guoyang Zhou (1):
net/hi
In the command channel, a message may has several fragments,
and the several fragments should have same message id. To
prevent problems, this check is added.
Fixes: 1e4593db1d58 ("net/hinic/base: fix log info for PF command channel")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
--
In the command channel, a message may has several fragments,
and the several fragments should have same message id. To
prevent problems, this check is added.
--
v1:
- add message id check for command channel
Guoyang Zhou (1):
net/hinic/base: add message check for command channel
drivers
When PF command channel is error, the variables in the log has been
cleared, which is not printed yet.
Fixes: 214164a6bf7f ("net/hinic/base: remove unused function parameters")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/base/hinic_pmd_mgmt.c | 4 +++-
1 fi
For device initialize, driver only supports four aeqs before,
and now driver can supports two or more aeqs from chip
config file.
Fixes: 611faa5f46cc ("fix various typos found by Lintian")
Cc: sta...@dpdk.org
Signed-off-by: Guoyang Zhou
---
drivers/net/hinic/base/hinic_pmd_e
This patch fixes can support two or more aeqs from chip
config file and also support four aeqs before, and fix log
info for pf command channel when something is error.
--
v1:
- support two or more aeqs for chip
- fix log info for pf command channel when something is error
Guoyang Zhou (2
22 matches
Mail list logo
