[dpdk-dev] rte_eth_dev_configure fails on VM with e1000 drivers #PERSONAL#

:07PM cc: B Gopikrishna , dev Subject: Re: [dpdk-dev] rte_eth_dev_configure fails on VM with e1000 drivers Hi Gopi I recently run into the same problem when using 82576 with igb_uio on VM. The problem is not e1000 or igb. The problem is with the other network device managed by virtio-pci d

[dpdk-dev] rte_eth_dev_configure fails on VM with e1000 drivers

PM cc: B Gopikrishna , dev Subject: Re: [dpdk-dev] rte_eth_dev_configure fails on VM with e1000 drivers Hi Gopi I recently run into the same problem when using 82576 with igb_uio on VM. The problem is not e1000 or igb. The problem is with the other network device managed by virtio-pci driver N

[dpdk-dev] test setup for l3fwd application running on VM

100.10.0.2101.0.0.1 101.0.0.2 (port: 6000) (port: 5000) Regards Gopi Krishna B -B Gopikrishna/HYD/TCS wrote: - To: dev at dpdk.org From: B Gopikrishna/HYD/TCS Date: 04

[dpdk-dev] test setup for l3fwd application running on VM

Hi I have the below setup and would like to check the l3fwd application running on VM VM1 VM2(DPDK-L3fwd) VM3 vnic1 --bridge1 vnic1 vnic2--bridge2vnic1 On VM1 -TCP client and, on VM3 -TCP serv

[dpdk-dev] rte_eth_dev_configure fails on VM with e1000 drivers

Hi when I run the l3fwd application with the below command line, I am observing the error "Cannot configure device: err=-22, port=0". The complete log is posted below. ./build/l3fwd -c 0x03 -n 2 -- -p 0x03 --config="(0,0,0),(1,1,1)" Setup: a) Virtual machine booted with Fedora20 with 2 virtual