Not here, I'm unfamiliar with the mirrored monitors issue other than
mentioned in the bug report.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce re
Running sparky linux with xfce. dual screen in expand mode after wake up
works until kernel 4.3. after that it wakes up mirrored. see this
thread:
https://forum.xfce.org/viewtopic.php?id=10951
hope this helps to find the cause.
--
You received this bug notification because you are a member of D
Probably had 2 dozen or more suspend/wake cycles using the patch from
comment #53 under linux v4.4.6 and it xfce4 is behaving as it should
waking the monitor. If the patch as-is is grammatically correct, etc. I
would recommended applying it to xfce4-settings.
--
You received this bug notificatio
** Bug watch added: Red Hat Bugzilla #1375171
https://bugzilla.redhat.com/show_bug.cgi?id=1375171
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce
Wow... thank heavens. I can also very that the patch from Comment #53
has solved this bug that has been driving me nuts for weeks. I would
lose my entire X session every single day as soon as the screen
blanked... quite troublesome when you're trying to make linux work as
your daily drive, haha.
I
*** Bug 12786 has been marked as a duplicate of this bug. ***
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode to NULL when power cycl
Similarly I keep losing my configured resolution of 1280x720, with the
system defaulting back to 1920x1080 every time (which looks rubbish on
my crappy monitor).
Manually running "xfsettingsd --replace" is a workaround, but not ideal.
All progress though, it's still much better than rebooting ever
I've had good luck with the patch (thank you!) but still see one
problem. After my dual monitors turn back on, they are now in mirrored
mode instead of side-by-side as they were before they went to sleep.
Running `xfsettingsd --replace` after this restores the screens to their
proper setup.
--
Yo
(In reply to jkampe68 from comment #68)
> I see one issue in the patch;
>
> When enabling the crtc it _unconditionally_ sets the output crtc (preferred)
> mode, rotation etc. properties.
> In multimonitor setups this likely leads screens to appear mirrored after
> power cycle (see comment #63 and
I just upgraded Arch (-Syu) with xfce4-settings ignored in pacman.conf, then
upgraded xfce4-settings from the aur using James'
[url]https://aur.archlinux.org/packages/xfce4-settings-blank-screen-fix/[/url]
and all is well (tested KVM switch, tested turn off monitor), thanks James!
--
You receiv
Hi - sorry to comment on an old closed bug, but has anyone ever reported
the remaining problem (monitors mirrored after wake) as Natanael Copa
suggested in #72? I searched but could not find anything.
--
You received this bug notification because you are a member of Desktop
Packages, which is sub
Haven't had any problems since installing the patch from #53. I plan to
upgrade Arch next weekend but haven't seen a new release of
xfce4-settings (4.12.0-3).
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubun
I've opened a downstream Fedora bug at
https://bugzilla.redhat.com/show_bug.cgi?id=1375171 with a bit more
information that might be useful.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.l
I see one issue in the patch;
When enabling the crtc it _unconditionally_ sets the output crtc (preferred)
mode, rotation etc. properties.
In multimonitor setups this likely leads screens to appear mirrored after power
cycle (see comment #63 and #64)
The patch should be improved by reading/rest
Thanks jkampe68! Attachment 6590 completely fixes the problem for me on
Ubuntu and Arch Linux. I've made an AUR package including your patch:
https://aur.archlinux.org/packages/xfce4-settings-blank-screen-fix/
--
You received this bug notification because you are a member of Desktop
Packages, wh
Please create a new issue if needed but refrain from posting questions
like that here. This is not a mailing list.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
I was experiencing the same issue switching my display (through a kvm)
between the Debian/Stretch machine running 4.12.0-2 and another machine.
jkampe68's patch fixed the problem. Thank you.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed t
On Linux Mint 18 xfce, I too got bitten by this bug.
After power off / power on, the monitor reports 'no signal'.
Intel Integrated Q45/Q43 Graphics (Dell Optiplex 780 USFF)
DisplayPort <--> DVI-D cable
Acer V243HL LCD Monitor (1920x1080 @60Hz)
I applied 'Enable crtc if it is disabled after power
xfce4-settings-4.12.0-5 has the patch applied in the (Arch Linux) package:
https://git.archlinux.org/svntogit/packages.git/commit/?h=packages/xfce4-settings
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu
In troubleshooing with ToZ in the forums, it seems as through this bug
is related to bug #12480 as well. The patch from comment #53 seems to
be allowing my monitor to wake from suspend under the 4.4.x series of
kernels. I will preform more tests before calling this solved, but
wanted to document t
I'm really impressed, thanks to the persistence with trying to find a
solution to this bug. As several of you have mentioned, the patch in
#53 / #54 (courtesy of jkampe68) seems to resolve the issue. I have
tested this patch myself, and while not being able to reproduce the
original issue, I have
This is affecting me on Mythbuntu 16.0.4.3 - with all updates applied as
of 10.09.2017. Machine is an Intel NUC NUC6CAYS.
Display is a Panasonic TV connected via HDMI.
As with other users above running xrandr --output 'DP-1' --mode
'1920x1080' brings the display back to life, as does restarting
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode to NULL when power cycled
Status in Mythbuntu:
Confirmed
Status in xfce4-settings:
** Tags added: xenial
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode to NULL when power cycled
Status in Mythbuntu:
Confirmed
Sta
Running Xubuntu 16.04.1 with all updates applied as of 31/01/17 this bug
affected me when using the HDMI port of a Braswell chipset Shuttle
XS36V5. When resuming my Samsung TV from standby the HDMI wouldn't wake
up and thus no picture. It was the only display device attached. Tried
various combinat
** Changed in: xfce4-settings
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode to NULL when p
Note that there is a Ubuntu package of 4.12.1 available now
http://packages.ubuntu.com/zesty/xfce4-settings which can be installed
at least without dependency issues on Ubuntu 16.04.
The upstream commit that fixes the issue is here
https://git.xfce.org/xfce/xfce4-settings/commit/?id=2233f20a7ec6d7
I tried xfce4-settings 4.12.1-11 as mentioned in #133 and indeed it "works", X
does not crash.
However, the set screen resolution is lost. When I turn on the screen again,
the desktop defaults to the highest possible screen resolution.
In my case, it means that my desktop menu bar and docky are
I downloaded xfce4-settings 4.12.1-11 as stated in comment #130 but for
my i386-based xubuntu 16.04 from
https://packages.debian.org/stretch/i386/xfce4-settings/download
This solved it for me.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed
Jonathan,
Given the latest version of xfce-settings (4.12.1) was easy to install
and fixed all of my issues (see comment #130 above), it would be
interesting to know whether this also fixed your problem.
Kind regards,
Aaron
--
You received this bug notification because you are a member of Desk
I also installed
http://ftp.uk.debian.org/debian/pool/main/x/xfce4-settings/xfce4-settings_4.12.1-1_amd64.deb
but my 2nd monitor doesn't come back on after it's entered power-save
mode when I move the mouse which does turn my primary laptop display
back on.
No combination of xrandr commands or swi
I have an ASUS Z170M-Plus Mobo with an Intel Core i3-6100T, Intel HD 530
graphics and a Samsung TV connected through HDMI, running Mythbuntu
16.04.
I had the issue that when I turned the TV off and then back on again, the TV
would say "No Signal" and I would have to run
$ sudo service lightdm re
Thanks for that!
I think I'll keep waiting for the patched version to come out for my distro
(32bit Xubuntu 16.04) as I'm really trying to avoid installing dev tool and
compiling from source... I guess I'm just too old and grumpy now and prefer to
spend time using my computers than fixing them.
Hi!
The XFCE4's maintainer claimed to have merged the patch for this bug here:
https://bugzilla.xfce.org/show_bug.cgi?id=11107#c67 on 2016-08-12.
A new version of xfce-settings (4.12.1) has been released on 2016-09-15
so we can assume that the fix is integrated in the release.
Note that the patch
Hi.
This affects me too.
I'm looking for what some other users refer to as "Alexander's patch" but I
can't find it.
Additionally, I see the post numbers jump fro #2 to #41... How can I see the
other posts? Perhaps the patch was posted there?
--
You received this bug notification because you are
As another workaround it is possible to disable the hotplug events in xorg conf.
here the steps:
switch to tty (crtl + alt + f1) and log in.
sudo service lightdm stop
sudo Xorg -configure # this creates an xorg.conf and displays where it is
stored
sudo cp /path/to/xorg.conf.new /etc/X11/xorg.con
The patch by philmanjaro works for me too by following instructions by
Alexandre ACEBEDO (aacebedo) from 2016-01-25, on a braswell system
(N3150 - Zbox CI323)
One thing though, I still have an issue if the TV is turned off when the
PC is booted initially, xrandr will give me the proper info and te
The patch in comment #53 works for me too, meaning that the desktop
remains visible after power cycling my receiver. However, the MythTV
frontend disappears (but the process is still running, according to ps).
mythfrontend.log doesn't provide any clues as to what is happening at
the time the recei
OK. This has been driving me nuts for weeks. I would lose my entire X
session every single day as soon as the screen blanked... quite
troublesome when you're trying to make linux work as your daily drive,
haha.
*Confirmed fix* w/ the patch suggested on xfce's bugzilla:
https://bugzilla.xfce.org/sh
And the title here really needs to be changed that this isn't an nVidia
bug, that probably confuses people trying to find it.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bu
I have confirmed that this patch allows my NUC derived systems to
recover the display when the monitor is switched off and then switched
on again. This for a NUC5i7RYH and a Gigabyte BRIX (GB-BXi5H-4200)
--
You received this bug notification because you are a member of Desktop
Packages, which is
Ok I have confirmed that the patch in #115 (Saved the Patch by jkampe68
(http://bug-attachment.xfce.org/attachment.cgi?id=6590) as .patch file.)
fixes the issue on NUC derived systems (Intel graphics, I've got a
NUC5i7RYH and a Gigabyte BRIX) where the screen attached to the display
port output doe
Scratch that, forgot to autogen.sh first, did it earlier but did not
repeat after resolving the last dependency. So not it compiled, on to
testing.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https:/
Trying to implement the suggestion in #115, I've got the git repo from
xfce.org and applied the patch, did the configure which ends with:
Build Configuration:
* Installation prefix: /usr
* Debug Support: full
* Xrandr support:yes
* UPower support:no
* Lib
The attachment "Patch by jkampe68" seems to be a patch. If it isn't,
please remove the "patch" flag from the attachment, remove the "patch"
tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the
team.
[This is an automated message performed by a Launchpad user owned by
~brian-murr
The patch by jkampe68 (#109) did it for me. Here is my flow chart:
Downloaded the xfce4-settings_4.12.0.orig.tar.bz2
(https://launchpad.net/ubuntu/+archive/primary/+files/xfce4-settings_4.12.0.orig.tar.bz2)
and unpacked it.
Saved the Patch by jkampe68 (http://bug-
attachment.xfce.org/attachment.c
** Patch added: "Patch by jkampe68"
https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1308105/+attachment/4664981/+files/jkampe68-xfce4-settings.patch
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers
Just a minor point: Glen pointed out in comment #86 that the curl
command to get the patch files doesn't work.
I've done some playing around. For some reason 'curl
https://bugzilla.xfce.org/attachment.cgi?id=5681' doesn't work - but
'curl -L http://bugzilla.xfce.org/attachment.cgi?id=5681', which
Reproducible on HP Pavilion SE a6655f, AMD x64, with Asus brand Geforce GT-220
(ENGT220) video card, only connected output is HDMI to surround receiver, then
HDMI to Panasonic LED TV.
Unused workaround from comment #22 (disable xfsettingfsd) and has been solid
since. I switched inputs on the TV
Any update on this issue?
Im getting it on the latest xubuntu nightly.
I can still access the console via Ctrl+Alt + F1. But cannot get back to
the xfce desktop.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in
The patch in #53 is working for me. Arch Linux 4.3.3.2-ck. Asus Radeon
R7-240 video card (using the hdmi port), Asus M5A88-M computer. I can
now switch via k-v-m to other pc's, can turn off power to monitor for
extended periods and all resumes when power is back on or k-v-m is
switched back to the
Created attachment 6590
Enable crtc if it is disabled after power cycle
Added prototype patch to enable crtc after power cycle of displayport monitor.
I hope maintainer can suggest improvements.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscrib
As suggested in comment 49
I think proper solution is enable crtc upon reconnection IF it is disabled.
Here is a prototype for patch - I'm hoping maintainer (Sean?)
can suggest "correct code" to enable crtc.
diff --git a/xfsettingsd/displays.c b/xfsettingsd/displays.c
index 095e323..af70256 100
I did a small mistake on my compiling instruction above, replace
./configure by ./autogen.sh and it should work.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
T
I have exactly the same issue on 15.10 with an intel card.
philmmanjaro on github has published a patch to solve the issue. Just applies
the patch on xfce 4.12 source code
The workaround to fix this is the following:
$> sudo apt-get install xfce4-dev-tools libexo-1-dev libgarcon-1-0-dev
libxfce4
seeing this in 16.04 daily xubuntu
didn't get anywhere with the script in the LP bug report, nor trying to
use that AND a udev rule (from xfce forum)
I am though getting success here using the one-liner (though sleeping
for 3 here instead of 10) in comment #48
--
You received this bug notificat
Hi Greg,
Trying to follow your instructions.
What do you mean by... and synaptic to lock this version
What did you do, what did you execute
Thanks
Doug
On Jan 17, 2016 1:05 PM, "Greg Fordyce" <1308...@bugs.launchpad.net> wrote:
> I also struggled with this bug when doing a f
I also struggled with this bug when doing a fresh install of Mythbuntu
14.04 this week.
I downloaded xfce4-settings 4.11.0-1 from this link.
https://launchpad.net/ubuntu/saucy/amd64/xfce4-settings/4.11.0-1ubuntu1
Then "sudo dpkg -i xfce4-settings_4.11.0-1ubuntu1_amd64.deb" to install
it and syna
I still get this in xfce4-settings.4.12.0-3 when I shut off the monitor via its
power button, or switch to another pc via a K-V-M switch. I'm unable to resume
the display when switching back to my Linux pc or turning the power back on. I
have to run 4.10.1-1. For a while I used the 4.11.3-3 fix
I have a Viewsonic VX2475Smhl-4K attached with a DisplayPort cable to a
Gigabyte GTX 970 (nvidia-358 driver, ASUS Z97-A, UEFI boot with CSM
disabled), and it requires `xrandr --auto` after being power cycled.
That's easy to set to a keyboard shortcut when logged in, but harder in
xflock4. Even les
Created attachment 6473
Patch to call xrandr --auto when a new display is connected
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode t
Adding my me too. I have a ECS Liva X with an intel graphics chip. When
I turn off my Samsung TV the screen goes away. I added the suggestion
above (killall xsettingsd) to the /etc/mythtv/session-settings and was
able to confirm that it does workaround the problem.
--
You received this bug notifi
Looking at Sean's comment of 2015-02-19, it appears that a functional
patch is still being sought. I am experiencing the problem of the
display not coming back when it is reconnected. I'm posting this in
hopes that it assists the maintainers of the code in resolving the
issue. With the 4.12 bran
On my system (Linux bono 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1
(2015-05-24) x86_64 GNU/Linux) the issue appeared only cca 2 weeks ago.
I don't know which package update (Debian Testing) caused it.
Everytime the monitor blanks it can't resume.
My workaround is to have this code running:
whil
My best solutions to the MythBuntu/XBMC/Kodi usecase:
1) Run a MythBuntu/XBMC/Kodi-session without any desktop at all! They're in
/usr/share/xsessions/
for running completely standalone.
2) Running a really minimal WM that doesn't try to manage screens at all like
Openbox. Works
well with Steam
You could probably just use 'xrandr --auto', at least that worked for
me.
I have actually now a different 'fix', by simply never having the system
notice the hdmi-link goes down. I used this wiki-page to fix that for my
Intel Haswell-cpu graphics.
https://wiki.archlinux.org/index.php/Kernel_mode_
I am currently experiencing this issue with a foxconn d180s j1800
motherboard and Xubuntu 15.04. After turning off the TV and receiver I
do not receive any video when turning them back on. Running the script
fixhdmi.sh posted above or 'xrandr -d :0 --auto' seems to fix the issue.
I just need to fi
My workaround of attaching another monitor to my desktop acting as a
HDTV MythTV client is not 100% effective.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Tit
I experienced this on an HDTV client, workaround and details
herehttps://bbs.archlinux.org/viewtopic.php?pid=1510206#p1510206
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bu
I have been having this issue on my 14.04 install for a while now (probably as
long as Mario), i have been using my rPi and a button to run a command over ssh
to fix it
DISPLAY=":0.0" xrandr --output HDMI-0 --auto
i upgraded me and my dad to xfce 4.12 and now he has the issue ga-a55m-ds2
mothe
@fkervin The bug status is still not marked as fixed. There has not
been a valid fix that doesn't cause a regression.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308
Hi all,
Some days ago appeared xfce 4.12, I've made an sudo apt-get update and
upgrade but problem is not solved.
Have I done something wrong or the problem is still not solved?
Regards
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to n
Hi Sean,
interesting. I have never tried to configure the monitor as this is my
projector display and not my laptop.
This is wierd as the bug you mentioned would suck for laptop / PC use
where you plug in and configure external displays somewhat regularly but
the bug that is the point of this bug
I would add the one-line patch, but then every monitor event triggers
the "new monitor" signal since all previously known monitors are now
forgotten.
To see this bug in action, enable the setting "Configure new displays
when connected", then manipulate the monitors with the settings dialog.
Move t
so the original bug of the display resetting to NULL has *not* been
fixed in the latest git version.
I left it for a day, came back and the display was blank when I turned
on the projector.
I have applied Alexander's 1 line patch and I'm testing that now. But
the git version has *not* fixed the p
For those trying the above commands... the curl to get the patch files is
likely not working.
I'm not motivated enough on curl to figure out the problem, but i was able to
copy/paste with a browser.
If you are unsure, look at the patch files, git diff, the output of patch,
etc...
For me the l
I've spent a good amount of hours researching and making tests,
unfortunately I can't make it work and I'm really desperate, so I'd
really thank any help.
I hope someone can lend me a hand (mainly on the procedures of patches of
alexander and sean, I can't make them work).
The script of fir
i'll test the latest git version without any additional patches early
next week when I get back home. I'll report what I find after a day or
two of testing (the bug only manifests when the display has been off for
quite some time)
Thanks,
Raj
--
You received this bug notification because you ar
@Steve
I guess that Olivier, Alexander or Sean are more suitable to tackle this than
me, all I did was to give some instructions and update the patch, so don't
expect a patch from me any sooner.
I use a 27" display and 19" in extended mode(configured via NVidia Settings)
and everything works smo
Hi Everyone,
I'm glad to have found this thread (Many thanks to ToZ in
forum.xfce.org): https://forum.xfce.org/viewtopic.php?id=9391
My problem is I read so many possible solutions that I really don't know
what to do. I have an intel onboard graphics card and if I turn off TV i
have blank screen
With the current git-master (xfce4-settings
8adbd2e2463f5cc46c7ed94c0acf264155476268) and NO patches the issue does
not occur for me. That is, neither when powering my HDMI-connected
screen off and on again nor when physically disconnecting and
reconnecting it.
However, I cannot even reproduce the
I would only suggest to prospective testers to first try out
Xfce4-Settings GIT (hence with Olivier's recent fix) with *no patch*. At
least here it fixes the issue, and maybe this addresses your concerns,
too.
--
You received this bug notification because you are a member of Desktop
Packages, whi
** Changed in: xfce4-settings
Status: Fix Released => Confirmed
** Changed in: xfce4-settings
Importance: Medium => Critical
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launch
Raj,
Thanks for clarifying. There might have been several sources of crashes
in the same report.
Could the people who commented on this report test whether
Xfce4-Settings git (hence with Olivier's recent fix) + Alexander's patch
work well for them?
Olivier, André: would you like to take ownershi
Raj,
Thanks for clarifying. There might have been several sources of crashes
in the same report.
Could the people who commented on this report test whether
Xfce4-Settings git (hence with Olivier's recent fix) + Alexander's patch
work well for them?
Olivier, André: would you like to take ownershi
Hi,
just wanted to point out that Sean's patch did *not* fix the screen
disappearing issue for me but the one liner from Alexander did.
Was a different patch apply to the main tree to fix the original reason
for this bug report? I'm willing to test the latest version, but I can
only do it next we
@Jesse
If everything goes well, this fix is going to be on Xfce 4.12, the question is
if Xubuntu is going to ship it in 15.04.
You can also build it by yourself or use a PPA, maybe
https://launchpad.net/~xubuntu-dev/+archive/ubuntu/xfce-4.12.
--
You received this bug notification because you ar
** Changed in: xfce4-settings
Status: In Progress => Fix Released
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode to NULL when
Glad to hear it's fixed for you. Looking at the two commits,
XfceOutputInfo *output was probably unitialised, causing a NULL check to
be ignored and a SEGFAULT.
Thanks for this thorough testing and debugging, Liviu. I'll close this
issue, please do open another report for your Mirror Display issue
Does anyone know how one might get this fix into Xubuntu?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode to NULL when power cycled
Here we go: Bug 11525
BTW, I wonder if this xfsettingsd crash issue was solved by addressing the
Coverity scan reports...
https://scan.coverity.com/projects/4135
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers i
As for the xfsettingsd crash, I noticed that with current master I was no
longer experiencing the crashes. So I did some GIT bisecting, and it turns out
that I can reproduce the crash with:
http://git.xfce.org/xfce/xfce4-settings/commit/?id=5a7f55a049147320adb8e2dc8495d6f868c4d6ac
But I get no
Surprisingly, not.
>git checkout master (22206)
Already on 'master'
Your branch is up-to-date with 'origin/master'.
>git checkout master (22206) returned '0'
Then:
make distclean && ./autogen.sh && make
I also removed 'xfce4-settings' from Synaptic. After `make install`, I
run `xfsettingsd --
OK: disabled `Mirror displays` option
GIT bisect points me to:
>git bisect bad (4)
835671ad8db9bcaed4ec3d53753b7f9a8b4610a7 is the first bad commit
commit 835671ad8db9bcaed4ec3d53753b7f9a8b4610a7
Author: Sean Davis
Date: Sat Jan 31 11:31:52 2015 -0500
Fix issues found with cppcheck
@Liviu: Is the "mirror" option available when installing xfce4-settings
from git master without Sean's patch?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Titl
** Changed in: xfce4-settings
Status: Incomplete => In Progress
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode to NULL when p
Hi Liviu,
Let us know in a few days if the bug is fixed with the patch, and if no
side effects were found, so we can release it in time for 4.12.
Thanks.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
Created attachment 5916
disabled `Mirror displays` option with Sean's updated patch
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1308105
Title:
Xfce resets TV mode t
As far as fixing the issue goes, it's very simple:
- if I do `/usr/bin/xfsettingsd --replace` (4.11.3), then I can easily
replicate the crash
- if I do `/usr/local/bin/xfsettingsd --replace` (GIT master with Sean's
updated patch), the I can no longer replicate the crash
I think the patch is eff
Thanks a lot André! And thanks a lot for the instructions; although I
know most of them individually, stringing them all together wasn't
immediately obvious.
I've tested Sean's updated patch and I'm happy to report that it seems
indeed to solve the `xfsettingsd` crashes. I will test it for a coupl
1 - 100 of 167 matches
Mail list logo
