It also doesn't fail on bare metal. We have an arm64 porter box
available to us and I did a test build w/dpkg-buildpackage in a chroot.
No failure.
I just also tried Debian unstable's Emacs 25.1 in my PPA and it fails in
exactly the same way, so we can rule out any Ubuntu deltas, as expected.
--
Building in my PPA with -O0 for arm64 fixes the problem, and I've
uploaded 25.1+1-3ubuntu4 with this change, so hopefully that will clear
it once it's approved.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to emacs25 in Ubuntu.
https:/
** Changed in: emacs25 (Ubuntu)
Assignee: (unassigned) => Barry Warsaw (barry)
** Changed in: emacs25 (Ubuntu)
Status: Confirmed => In Progress
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to emacs25 in Ubuntu.
Here are a few more relevant comments from IRC and email:
barry: software-properties was already ported from aptdaemon to pk in
Debian, we didn't push it into zesty since I don't think anyone
checked if the driver code worked [16:51]
https://anonscm.debian.org/git/co
Bugtasks added for revdep source packages. Hopefully I got them all.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1673258
Title:
Remove aptdaemon and drop or port its rev
Status: New => In Progress
** Changed in: network-manager (Ubuntu)
Assignee: (unassigned) => Barry Warsaw (barry)
** Changed in: network-manager (Ubuntu)
Milestone: None => ubuntu-17.04
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which
Actually, I believe this is a unity7 bug since ubuntu-gnome-desktop does
the right thing.
** Also affects: unity (Ubuntu)
Importance: Undecided
Status: New
** No longer affects: gnome-desktop (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Desktop Bug
I'm moving this bug from gnome-desktop to unity because ubuntu-gnome-
desktop does not seem to exhibit the same problem. It might still be a
chromium issue though so keeping that.
** Also affects: unity (Ubuntu)
Importance: Undecided
Status: New
** No longer affects: gnome-desktop (Ubu
@cmiller: ping; any progress on this bug?
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-desktop in Ubuntu.
https://bugs.launchpad.net/bugs/1639937
Title:
Cannot set Emacs key bindings
To manage notifications about this bug
Public bug reported:
I've begun to notice this problem on a fresh Zesty install. I've seen
it with gnome-terminal, the standard switcher, and emacs25 but I suspect
other applications may have a similar problem.
Hitting an Alt+ combination seems fairly racy. Sometimes it will
do what I expect bu
** Also affects: gnome-desktop (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-desktop in Ubuntu.
https://bugs.launchpad.net/bugs/1639937
Title:
Cannot set Emacs key binding
) => Barry Warsaw (barry)
** Also affects: gedit (Ubuntu)
Importance: Undecided
Status: New
** Also affects: gnome-builder (Ubuntu)
Importance: Undecided
Status: New
** Also affects: gtranslator (Ubuntu)
Importance: Undecided
Status: New
** Also affects: life
Public bug reported:
dist-upgrade
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: systemd 228-2ubuntu1
ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
Uname: Linux 4.3.0-2-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.19.3-0ubuntu1
Architecture: amd64
Date: Thu Dec
Public bug reported:
After dist-upgrading from Wily to Xenial, gnome-terminal has a global
menu bar entry, and switcher icon of Byobu Terminal. This is regardless
of whether I start Terminal via gnome-do, unity (search or sidebar), or
Emacs shell buffer typing 'gnome-terminal'. Other than that,
Public bug reported:
Booting a freshly dist-upgraded vivid, I see the following console
messages with a red spinner hang the boot process until the first one
reaches its timeout:
(1 of 2) A start job is running for dev-mapper-cryptswap1.device (34s / no
limit)
(2 of 2) A start job is running for
On Nov 18, 2014, at 02:41 PM, Martin Pitt wrote:
>Bash's input redirection simply is way more powerful. Granted, bash
>takes a tad longer to start up, but any tee or other external program
>which you call in addition will probably hurt performance just as much.
Purely selfishly, switching back t
On Nov 14, 2014, at 11:38 PM, Gunnar Hjalmarsson wrote:
>Right now I don't know how to best deal with this issue. Any advice
>appreciated.
Probably use tee(1) to get the output both into the temp file and
~/.xsession-errors.
--
You received this bug notification because you are a member of Ubun
On Nov 14, 2014, at 09:59 PM, Gunnar Hjalmarsson wrote:
>I don't know. Syntax errors directly in e.g. ~/.profile or /etc/profile
>are logged in ~/.xsession-errors both with the latest lightdm version
>and with previous versions, but I don't know whether syntax errors in
>files which are sourced fr
On Nov 14, 2014, at 08:15 PM, Gunnar Hjalmarsson wrote:
>Being thrown back indicates a syntax error.
Are those errors logged anywhere permanently?
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.
Hi Gunnar.
On Nov 14, 2014, at 07:07 PM, Gunnar Hjalmarsson wrote:
>It has always been using Bourne shell, so "source" is not understood.
>You have obliviously been running your system without the configuration
>in those other shell files.
Sure, it's entirely possibly that my login has been sile
For now I'll keep the hold on lightdm, but if Robert or someone else
wants to debug in real-time, ping me on irc.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/678421
Title:
Error mes
pay-service crashed, leaving a core file and the following in
.xsesssion.old. Not sure if this is related.
upstart: pay-service main process (6149) killed by ABRT signal
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
Hmm, as 1.13.0-0ubuntu1 just showed up in vivid, it broke my login in
the follow way. Note that I always try devel channel updates in a VM
with a snapshotted disk so I'm able to revert and do some further
investigating. Looking at the dist-upgrade packages, I suspect the
lightdm changes are affec
apt-mark lightdm hold && apt-get dist-upgrade && reboot
Indeed, logins are fine.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/678421
Title:
Error message for a faulty ~/.profile scr
On Nov 11, 2014, at 03:43 PM, Iain Lane wrote:
>Don't think so - this version has a migration from GConf to GSettings
>for settings storage so the value may have been lost for you there. If
>so, that'd be a bug. I'll make a note to try this out.
That could be it. I'd need to set up a utopic vm t
On Nov 11, 2014, at 09:22 AM, Iain Lane wrote:
>Is Edit→Preferences→“Enable mnemonics” checked or unchecked?
It wasn't, and is now, and the menu bar underlines are back. Is this a new
option? (It wasn't anything I explicitly changed when upgrading from utopic
to vivid.)
Still one small nit: th
Public bug reported:
After upgrading to Vivid, Terminal no longer accepts any Alt menu
shortcuts.
To reproduce, start up Terminal and give it the focus. When you hit and
hold Alt, you'll see the application menu show up in the global menu
bar, but none of the menus or items have underlines, and
This seems to be the best I can manage for a traceback. Note that I had
to manually hack /usr/lib/debug/usr/bin/mono-sgen-gdb.py to be Python 3
compatible (will file a separate bug on that).
There are still some undefined symbols, but I can't suss out which
packages are missing, and apport does n
By process of elimination (i.e. bisecting apt-get installs of all the
dist-upgrade upgrading packages), I've narrowed this down to the
following binary packages: libglib2.0-0 libglib2.0-bin libglib2.0-dev
all part of the glib2.0 source package, version 2.41.2-1. In all
likelihood it's the libglib2
Public bug reported:
On a desktop machine with dual monitors, locking the screen keeps the
monitors power active forever. Previously, after some time, the
monitors would power save and turn off until a key or mouse button was
pressed. Now, the monitors never power down.
ProblemType: Bug
DistroR
Public bug reported:
The latest update broke the clock in several ways:
* No clock shows up in the menu bar.
* Open Time & Date settings. You cannot edit anything in the Clock tab.
ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: gnome-control-center 1:3.6.3-0ubuntu38
ProcVersionSignature
This bug has magically gone away. I'll mark it invalid.
** Changed in: gnome-terminal (Ubuntu)
Status: New => Invalid
** Changed in: ubuntu-meta (Ubuntu)
Status: New => Invalid
** Changed in: unity (Ubuntu)
Status: New => Invalid
--
You received this bug notification beca
** Summary changed:
- gnome-terminal eats control-space
+ Unity (?) eats control-space
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1089355
Title:
Unity (?) eats control-
Actually, I don't think this is a regression in gnome-terminal since
running jed in an xterm exhibits the same problem.
** Also affects: unity (Ubuntu)
Importance: Undecided
Status: New
** Also affects: ubuntu-meta (Ubuntu)
Importance: Undecided
Status: New
--
You received t
Public bug reported:
I've just noticed this in recent Raring updates: gnome-terminal is now
eating control-space keystrikes (C-space).
This is a pretty important keybinding when running various editors such
as emacs -nw or jed in a terminal window. I've looked through the
keyboard shortcuts and
This probably provides the best rationale for why I consider this a bug:
https://lists.debian.org/debian-python/2011/03/msg00013.html
Scott K also quotes Debian Python policy here:
https://lists.debian.org/debian-python/2011/03/msg00015.html
(which indicates that while not prohibited, D-P polic
Public bug reported:
% head -n 1 /usr/bin/invest-chart
#!/usr/bin/env python
While it's fine, preferable even for the development version of invest-
chart to use the above #! line, it is asking for trouble in the deployed
production version. When installed, invest-chart should use
#!/usr/bin/pyt
Public bug reported:
% head -n 1 /usr/bin/gdbus-codegen
#!/usr/bin/env python
While it's fine, preferable in fact for the development version of
gdbus-codegen to have #! /usr/bin/env python, it is not correct for the
deployed production version to use it. That's just asking for breakage.
Instead
Public bug reported:
% head -n 1 /usr/bin/gtk-builder-convert
#!/usr/bin/env python
While this is fine, preferable even for the development version of the
script, it is destined to break in the deployed production version of
the script. The header must use #!/usr/bin/python instead.
** Affects:
Private bug reported:
Just logged in after an apt-get update.
ProblemType: Crash
DistroRelease: Ubuntu 12.04
Package: libevolution 3.2.3-0ubuntu3
ProcVersionSignature: Ubuntu 3.2.0-20.32-generic 3.2.12
Uname: Linux 3.2.0-20-generic x86_64
ApportVersion: 1.95-0ubuntu1
Architecture: amd64
CrashCoun
On Jan 11, 2012, at 09:12 PM, Zoubidoo wrote:
>Fixed? Not for me:
>
>$ computer-janitor find
>ERROR:dbus.proxies:Introspect error on :1.368:/:
>dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied:
>Rejected send message, 1 matched rules; type="method_call", sender=":1.371"
>
After chatting with Alex on IRC, this is definitely the same bug, so
screen shots probably aren't necessary. Unfortunately, neither of us
understand how to test out the workaround in comment #9 :/ Seems like
upstream doesn't think this is a regression.
--
You received this bug notification bec
This has happened to me also in precise with Gnome Terminal. In
oneiric, I used to be able to get two 80-wide Terminals next to each
other with Ubuntu Mono 14 in a 1600x1200 screen. In precise, these
overlap now and I have to bump them down to UM 13, which isn't as
readable and also feels like th
/usr/bin/env is a perfectly good solution for *development* branches of
packages, but very definitely not for deployed production versions of
applications, for exactly the reasons described in this bug report.
Meaning: if you are developing a Python application, by all means use
/usr/bin/env in you
Yep, affects Computer Janitor:
https://bugs.launchpad.net/ubuntu/+source/computer-janitor/+bug/806574
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to pygobject in Ubuntu.
https://bugs.launchpad.net/bugs/886359
Title:
Missing featur
On Oct 04, 2011, at 02:44 AM, Sean Fitzpatrick wrote:
>I'm getting the suspend issue as well, in spite of setting things to "don't
>suspend" - surprisingly, it suspended even while playing music - I'd set a
>playlist to listen to while doing some work away from the computer, and had
>things come t
Okay, I've confirmed that gtimelog 0.7.0 (which sets gi as the default) crashes
with gir1.2-pango-1.0 1.29.3-0ubuntu3, but works fine with the ppa version,
modulo bug 849732 which is a separate issue.
I'll go ahead and release 0.7.0 and upload it so that when pango gets uploaded,
the new gtime
Thanks Martin. I'll upload gtimelog 0.6.1, so that when pango gets
unfrozen, we'll actually have a working app. :)
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to pango1.0 in Ubuntu.
https://bugs.launchpad.net/bugs/855076
Title:
gt
Public bug reported:
Hi Martin,
When you uploaded gtimelog 0.6.0, you changed its Depends to
gir1.2-pango-1.0 (>= 1.29.3+git20110916) but only 1.29.3-0ubuntu3 is in
oneiric. I have a gtimelog 0.6.1 src package (with your upstream
fixes... thanks!) ready to go, but I'm not sure what to do about t
micahg: how truly odd. bug 788514 has a task for python-debian, which
is marked fixed released, and i have a branch sitting here with the
necessary changes. i usually never manually flip the fix released
status, so i'm not sure what's going on. maybe i never uploaded the
As for python-debian, I'm inclined not to try a sync at this point in
the Oneiric cycle. 0.1.21 has some new features and API changes which
worry me a bit, and does not include the Ubuntu deltas to support lzma.
I'm going to give it a shot to just convert our package to dh_python2
and leave the syn
On Aug 30, 2011, at 01:32 AM, Bryce Harrington wrote:
>It sounds sort of like gnome-settings-daemon is not capturing the
>settings properly, so your system is defaulting to 10 minutes. I notice
>this in your dmesg which hints perhaps gsd is dying (coincidentally in
>some power module):
>
>[22483.
Hi Bryce, thanks very much for looking at this.
On Aug 30, 2011, at 01:56 AM, Bryce Harrington wrote:
>Your xorg.conf only specifies "glx", but that's loaded by default now.
>You should be able to entirely delete your xorg.conf with no impact to
>X. (In fact we ship without xorg.conf and recomme
This occurred for me after trying to start mumble.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to metacity in Ubuntu.
https://bugs.launchpad.net/bugs/804702
Title:
metacity crashed with SIGABRT in raise()
To manage notifications a
On Jul 19, 2011, at 08:17 PM, Sebastien Bacher wrote:
>you can probably use "gsettings set org.gnome.desktop.interface.gtk-key-
>theme "Emacs""
There's an extra dot in there, but yep, that works great:
$ gsettings set org.gnome.desktop.interface gtk-key-theme "Emacs"
Thanks!
--
You received t
Public bug reported:
In Ubuntu < Oneiric, I've always set my key theme to Emacs, using this
command:
gconftool-2 -s /desktop/gnome/interface/gtk_key_theme -t string Emacs
This still works on a machine I upgraded from Natty to Oneiric, but on a
fresh Oneiric install, it no longer works. Is there
*** This bug is a duplicate of bug 807107 ***
https://bugs.launchpad.net/bugs/807107
#1) I keep my Oneiric on the bleeding edge, with last update just a
couple of hours ago.
#2) I honestly don't know; it's only recently been the case that the top
menubar hasn't been completely corrupted (and
It's a regression from Natty, but I don't know if it's intentional or
not (I hope not!)
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/809588
Title:
No way to display
Actually, the Subject is still relevant.
Click on the clock applet or System Settings to bring up the Date and
Time dialog. 24-Hour Time is selected, but the top-panel clock still
shows 12-hour time. Even toggling 24-Hour Time setting on and off does
not give you a 24 hour clock.
--
You receiv
Public bug reported:
Click on the clock applet, or System Settings to bring up the Date and
Time settings. There's no way to display the Date in the top panel the
way there is in Natty. E.g. I have this in my top panel on Natty: Tue
Jul 12 17:47 but there's no way to get the same on Oneiric.
**
Public bug reported:
System settings -> Displays. Make a change, e.g. turn off mirror
displays on a dual headed machine. Click Apply. The dialog for "Keep
this configuration" grows enormously every second because the font keeps
getting bigger and bigger. Very weird and very challenging to actu
On Jul 12, 2011, at 08:27 PM, Sebastien Bacher wrote:
>thank you for your bug report, the option are in "language and country"
>(or whatever is the english wording), "layout", "option"
Thanks, I found it there. While I wouldn't say the old location was a model
of discoverability, this is really
Public bug reported:
I just installed a fresh Oneiric alpha 2. When I go to System Settings
-> Keyboard, I have no way to swap control and caps lock. This is a
regression from Natty where System Settings -> Keyboard provided many
more tabs, including Layouts where there was an Options... button
It looks like you've got some cruft left over related to Python 2.5 that
isn't getting cleaned up properly. Can you install python-reportlab
manually from the command line:
$ sudo apt-get install --reinstall python-reportlab
If that fails, try first removing it:
$ sudo apt-get remove python-rep
*** This bug is a duplicate of bug 785288 ***
https://bugs.launchpad.net/bugs/785288
** This bug has been marked a duplicate of bug 785288
package python-gmenu 2.30.0-0ubuntu4 failed to install/upgrade:
ErrorMessage: subprocess installed post-installation script returned error exit
status
*** This bug is a duplicate of bug 785288 ***
https://bugs.launchpad.net/bugs/785288
** This bug has been marked a duplicate of bug 803383
package python-gmenu 2.30.0-0ubuntu4 failed to install/upgrade: o subproceso
script post-installation instalado devolveu o estado de saída de erro 2
*
Patch verified to work for me in Natty.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to pygtk in Ubuntu.
https://bugs.launchpad.net/bugs/664920
Title:
SRU: 100% CPU usage when calling a child process from a python script
--
deskto
Oops, never mind, it *is* reproducible.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to pygtk in Ubuntu.
https://bugs.launchpad.net/bugs/664920
Title:
SRU: 100% CPU usage when calling a child process from a python script
--
deskto
@Chris: the test case in comment #7 doesn't cause 100% cpu for me, so
I'm not sure it's a proper test case for SRU. But the debdiff in
comment #8 is obviously correct on the face of it, so it seems like a
reasonable patch to apply.
--
You received this bug notification because you are a member o
I cannot verify this on Natty. I run totem in the background, and then
run coherence in a shell. I don't get the traceback, and nothing else
appears to happen (either bad or good). I do not have a coherence.conf
file so I can't run it with that option.
Is it possible that your coherence.conf fi
** Changed in: matplotlib (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to pygobject in Ubuntu.
https://bugs.launchpad.net/bugs/727649
Title:
python2.7-dbg crashed with SIGSEGV in PyDict_GetItem
** Changed in: pygobject (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to pygobject in Ubuntu.
https://bugs.launchpad.net/bugs/727649
Title:
python2.7-dbg crashed with SIGSEGV in PyDict_GetItemS
** Tags added: python27
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to pygobject in ubuntu.
https://bugs.launchpad.net/bugs/727649
Title:
python2.7-dbg crashed with SIGSEGV in PyDict_GetItemString()
--
desktop-bugs mailing list
d
On Feb 02, 2011, at 11:13 AM, Marco Biscaro wrote:
>I can not reproduce this bug anymore (even on proxy settings or keyboard
>configuration).
>
>Can someone confirm that this bug is fixed?
It's definitely fixed for C-J. I don't know if the other packages were
patched the same way, or whether som
Python 2.6 is not yet officially dropped for Natty:
https://lists.ubuntu.com/archives/ubuntu-devel/2011-February/032402.html
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to pygobject in ubuntu.
https://bugs.launchpad.net/bugs/712734
buntu)
Status: Confirmed => In Progress
** Changed in: computer-janitor (Ubuntu)
Assignee: (unassigned) => Barry Warsaw (barry)
** Changed in: computer-janitor (Ubuntu)
Milestone: None => natty-alpha-2
--
You received this bug notification because you are a member of Ubunt
Still investigating, but I suspect this is a bug in polkit since:
1) the same code for CJ works in maverick
2) this bug is affecting multiple different packages
I'm guessing that the type for start-time got erroneously changed from
uint64 to string. This page still describes start-time's time to
Bug 665740 is a different problem.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in ubuntu.
https://bugs.launchpad.net/bugs/676488
Title:
dbus.proxies:Introspect error when cleaning up prevents clean up
acti
python27 tag removed since libdesktop-agnostic was fixed.
** Tags removed: python27
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to epiphany-browser in ubuntu.
https://bugs.launchpad.net/bugs/677382
Title:
gir-repository fails to b
** Branch linked: lp:~barry/ubuntu/natty/fso-abyss/618809-ftbfs-2
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to rhythmbox in ubuntu.
https://bugs.launchpad.net/bugs/618809
Title:
libvala-dev -> libvala-0.10-dev transition
--
de
** Changed in: libgsm0710mux (Ubuntu)
Importance: Undecided => Medium
** Changed in: libgsm0710mux (Ubuntu)
Status: New => In Progress
** Changed in: libgsm0710mux (Ubuntu)
Milestone: None => natty-alpha-2
** Changed in: libgsm0710mux (Ubuntu)
Assignee: (unassigned)
** Changed in: libfso-glib (Ubuntu)
Importance: Undecided => Medium
** Changed in: libfso-glib (Ubuntu)
Status: New => In Progress
** Changed in: libfso-glib (Ubuntu)
Milestone: None => natty-alpha-2
** Changed in: libfso-glib (Ubuntu)
Assignee: (unassigned) =>
** Changed in: mdbus (Ubuntu)
Importance: Undecided => Medium
** Changed in: mdbus (Ubuntu)
Status: New => In Progress
** Changed in: mdbus (Ubuntu)
Milestone: None => natty-alpha-2
** Changed in: mdbus (Ubuntu)
Assignee: (unassigned) => Barry Warsaw (barry)
** B
nassigned) => Barry Warsaw (barry)
** Changed in: libfsotransport (Ubuntu)
Importance: Undecided => Medium
** Changed in: libfsotransport (Ubuntu)
Status: New => In Progress
** Changed in: libfsotransport (Ubuntu)
Milestone: None => natty-alpha-2
** Changed in: li
nassigned) => Barry Warsaw (barry)
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to rhythmbox in ubuntu.
https://bugs.launchpad.net/bugs/618809
Title:
libvala-dev -> libvala-0.10-dev transition
--
desktop-bugs mailing li
** Changed in: libfsobasics (Ubuntu)
Importance: Undecided => Medium
** Changed in: libfsobasics (Ubuntu)
Status: New => In Progress
** Changed in: libfsobasics (Ubuntu)
Milestone: None => natty-alpha-2
** Changed in: libfsobasics (Ubuntu)
Assignee: (unassigned)
** Changed in: fso-misc-vapi (Ubuntu)
Importance: Undecided => Medium
** Changed in: fso-misc-vapi (Ubuntu)
Status: New => In Progress
** Changed in: fso-misc-vapi (Ubuntu)
Milestone: None => natty-alpha-2
** Changed in: fso-misc-vapi (Ubuntu)
Assignee: (unassigned)
** Changed in: fso-usaged (Ubuntu)
Importance: Undecided => Medium
** Changed in: fso-usaged (Ubuntu)
Status: New => In Progress
** Changed in: fso-usaged (Ubuntu)
Milestone: None => natty-alpha-2
** Changed in: fso-usaged (Ubuntu)
Assignee: (unassigned) =>
** Changed in: fso-abyss (Ubuntu)
Importance: Undecided => Medium
** Changed in: fso-abyss (Ubuntu)
Status: New => In Progress
** Changed in: fso-abyss (Ubuntu)
Milestone: None => natty-alpha-2
** Changed in: fso-abyss (Ubuntu)
Assignee: (unassigned) => Barry W
I just proposed a merge of a branch that completes the libvala
transition for ethos and fixes the fbtfs for me. Note that the rules
file will only build the Python bindings for the default version (2.7 on
Natty), but since the original bug report is primarily related to the
libvala transition, a s
** Changed in: ethos (Ubuntu)
Status: Confirmed => In Progress
** Changed in: ethos (Ubuntu)
Assignee: (unassigned) => Barry Warsaw (barry)
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to rhythmbox in ubuntu.
Debdiff as requested by Matthias.
** Patch added: "674175.debdiff"
https://bugs.launchpad.net/ubuntu/+source/vte/+bug/674175/+attachment/1749251/+files/674175.debdiff
--
rebuild python-vte for python2.7
https://bugs.launchpad.net/bugs/674175
You received this bug notification because you are
Confirmed that this fixes the build. Thanks Michael. See attached
branch, which is ready for review and upload.
** Branch linked: lp:~barry/ubuntu/natty/vte/674175-ftbfs
--
rebuild python-vte for python2.7
https://bugs.launchpad.net/bugs/674175
You received this bug notification because you ar
bug 674175 is tracking the ftbfs in natty.
** Tags removed: python27
--
package python-vte 1:0.20.0-0ubuntu2 failed to install/upgrade: subprocess new
pre-removal script returned error exit status 1
https://bugs.launchpad.net/bugs/672041
You received this bug notification because you are a memb
Debian maintainer contacted.
--
rebuild python-vte for python2.7
https://bugs.launchpad.net/bugs/674175
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to vte in ubuntu.
--
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://li
** Attachment added: "full build failure"
https://bugs.launchpad.net/ubuntu/+source/vte/+bug/674175/+attachment/1742944/+files/vte_0.26.0-0ubuntu2_amd64.build
--
rebuild python-vte for python2.7
https://bugs.launchpad.net/bugs/674175
You received this bug notification because you are a membe
I think the problem is that when it wants to build in
debian/build/main/python, it only builds for Python 2.6 and this somehow
leaves artifacts around that break the Python 2.7 build.
--
rebuild python-vte for python2.7
https://bugs.launchpad.net/bugs/674175
You received this bug notification bec
ftbfs for Natty with Python 2.6 and 2.7. It appears as though it's
still referencing Python 2.6 when it tries to build the package for
Python 2.7. Cause is currently unknown.
** Changed in: vte (Ubuntu)
Status: Triaged => In Progress
** Changed in: vte (Ubuntu)
Milestone: None => nat
Ignore my previous message. I'm seeing a different ftbfs for vte 0.26.0
for natty, for which I will open a new bug.
As the original bug report here was against 9.04 and an older version of
vte, I'm removing the tag and setting the status to Incomplete. Does
this bug still affect Maverick or Natt
So, why is it testing for a python2.6 directory when installing python
2.7?
--
package python-vte 1:0.20.0-0ubuntu2 failed to install/upgrade: subprocess new
pre-removal script returned error exit status 1
https://bugs.launchpad.net/bugs/672041
You received this bug notification because you are
1 - 100 of 113 matches
Mail list logo
