Re: 4.3.0-0pre1v1 [XSF, please read]

On Wed, Jun 18, 2003 at 03:10:31PM +0900, ISHIKAWA Mutsumi wrote: > Current status: > xcursor is already installed into sid. So it is - thanks. My p.d.o search on "xcursor" turned up nothing. > build checks are done on i386/sparc/alpha. See p/d/STATUS for info on whether the various architectu

诚信圣通－－停车场全自动收发卡机！

debian-x:您好! 北京诚信圣通科技有限责任 公司网址：http://www.spwe.com 非接触式IC卡收卡机（SPW-CFJ-01B）： 工作过程描述： 1、当车辆压上发卡机前的线圈后，司机按按扭，发卡机连续完成准备卡、 读写、计数、发出系列动作，发出一张卡。 2、支持外部刷卡：司机自带的卡（如公务卡、月票卡等）可直接在外部刷卡。 3、司机取卡后，栏杆抬起，通行灯变绿，车辆通过栏杆；栏杆上的红外检测 器识别出车辆经过，栏杆控制器控制栏杆落下，同时给出信号给入口控制器， 这时下一辆车可以取卡通行； 4、内置的控制器可以通过串口通讯口（RS232）从上位机

adding VIA driver to backported woody XFree86 4.3 - ABI minorversion problem

Hi, I have a VIA EPIA-M 1. I installed Debian Woody on it (0) Anyway, I cannot use Woody's default XFree86 package. I need to use the latest XFree, as the drivers for the S3 VIA CLE266 chipset have been included in the tree in April. See Bugzilla #154. First release using it is XFree 4.3.99.3

Re: adding VIA driver to backported woody XFree86 4.3 - ABI minor version problem

On Wed, Jun 18, 2003 at 11:02:23AM +0200, Jerome Lacoste wrote: > I've found Daniel's woody backported packages (1). But as his package > doesn't contain my driver, I thought of getting the via driver from > XFree source, compile it and add it to the > /usr/X11R6/lib/modules/drivers/ directory. Yo

Re: adding VIA driver to backported woody XFree86 4.3 - ABI minor version problem

On Wed, Jun 18, 2003 at 07:58:15PM +1000, Daniel Stone wrote: > On Wed, Jun 18, 2003 at 11:02:23AM +0200, Jerome Lacoste wrote: > > I've found Daniel's woody backported packages (1). But as his package > > doesn't contain my driver, I thought of getting the via driver from > > XFree source, compile

Re: adding VIA driver to backported woody XFree86 4.3 - ABI minorversion problem

On Wed, 2003-06-18 at 11:58, Daniel Stone wrote: > On Wed, Jun 18, 2003 at 11:02:23AM +0200, Jerome Lacoste wrote: > > I've found Daniel's woody backported packages (1). But as his package > > doesn't contain my driver, I thought of getting the via driver from > > XFree source, compile it and add i

Re: libXau in xlibs-pic?

> In <[EMAIL PROTECTED]> > Eric Dorland <[EMAIL PROTECTED]> wrote: >> I've packaged XCB , but I was in >> violation of policy because the shared libraries were not compiled >> with -fPIC. I fixed that but unfortunately the lib uses libXau which >> only comes

Re: libXau in xlibs-pic?

> In <[EMAIL PROTECTED]> > ISHIKAWA Mutsumi <[EMAIL PROTECTED]> wrote: >> > In <[EMAIL PROTECTED]> >> >Eric Dorland <[EMAIL PROTECTED]> wrote: >> >> I've packaged XCB , but I was in >> >> violation of policy because the shared libraries were

X Strike Force SVN commit: rev 209 - branches/4.3.0/sid/debian/patches

Author: ishikawa Date: 2003-06-18 09:38:15 -0500 (Wed, 18 Jun 2003) New Revision: 209 Modified: branches/4.3.0/sid/debian/patches/909_debian_piclib_support.diff Log: cosmetic fix, add missing #endif Modified: branches/4.3.0/sid/debian/patches/909_debian_piclib_support.diff ==

Bug#197918: xfonts-100dpi: Helvetica (adobe) not exported through xfs

Package: xfonts-100dpi Version: 4.2.1-6 Severity: important Hi! I'm setting up a Linux Thin-Client that uses the X client applications and fonts from this server. The applications and fonts work fine, except for the "Helvetica (adobe)" *bold* font, which is the default sans-serif font for Galeo

Processed: severity of 197918 is normal

Processing commands for [EMAIL PROTECTED]: > severity 197918 normal Bug#197918: xfonts-100dpi: Helvetica (adobe) not exported through xfs Severity set to `normal'. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (adm

Re: libXau in xlibs-pic?

On Tue, Jun 17, 2003 at 10:20:44PM -0400, Eric Dorland wrote: > I've packaged XCB , but I was in > violation of policy because the shared libraries were not compiled > with -fPIC. I fixed that but unfortunately the lib uses libXau which > only comes in a static non-pic

Re: X Strike Force SVN commit: rev 209 - branches/4.3.0/sid/debian/patches

On Wed, Jun 18, 2003 at 09:38:31AM -0500, X Strike Force SVN Admin wrote: > Author: ishikawa > Date: 2003-06-18 09:38:15 -0500 (Wed, 18 Jun 2003) > New Revision: 209 > > Modified: >branches/4.3.0/sid/debian/patches/909_debian_piclib_support.diff > Log: > cosmetic fix, add missing #endif Eh?

4.3.0 wishlist item

To all members of the X Strike Force: Please include the CVS HEAD version of the SiS driver (which compiles and works with 4.3.0) in Debian's upcoming 4.3.0 release. The driver from CVS HEAD is much improved compared to the original 4.3.0 version. This step would save me a lot of user enquiries

X Strike Force SVN commit: rev 210 - /

Author: branden Date: 2003-06-18 11:48:45 -0500 (Wed, 18 Jun 2003) New Revision: 210 Added: HACKING Log: add HACKING file including proposed policies from earlier this month Added: HACKING == --- HACKING 2003-06-1

X Strike Force SVN commit: rev 211 - /

Author: branden Date: 2003-06-18 11:51:15 -0500 (Wed, 18 Jun 2003) New Revision: 211 Added: COMMITTERS Log: add file enumerating the folks with commit access to the repo, and briefly (and whimsically) describing their responsibilities Added: COMMITTERS

X Strike Force SVN commit: rev 212 - /

Author: branden Date: 2003-06-18 12:01:26 -0500 (Wed, 18 Jun 2003) New Revision: 212 Modified: HACKING README Log: move checkout/export policy from README to HACKING, since it is only applicable to those with the power to checkout or export from the repository Modified: HACKING ===

Re: libXau in xlibs-pic?

* Branden Robinson ([EMAIL PROTECTED]) wrote: > On Tue, Jun 17, 2003 at 10:20:44PM -0400, Eric Dorland wrote: > > I've packaged XCB , but I was in > > violation of policy because the shared libraries were not compiled > > with -fPIC. I fixed that but unfortunately the l

X Strike Force SVN commit: rev 213 - /

Author: branden Date: 2003-06-18 13:10:11 -0500 (Wed, 18 Jun 2003) New Revision: 213 Modified: README Log: README: very minor cosmetic updates Modified: README == --- README 2003-06-18 17:01:26 UTC (rev 212) +++

Bug#197965: xterm: pasting is VERY slow in an utf-8 environnement

Package: xterm Version: 4.2.1-8 Severity: minor compare xterm/uxterm with LANG=$$$.UTF-8 and LANG=C , with utf8 you can actually see every character being written on the term :( -- System Information: Debian Release: testing/unstable Architecture: i386 Kernel: Linux Xzeus 2.4.21-ck1 #1 Mon Jun 1

nasty CVS directories all over 4.3.0 .orig.tar.gz

Ugh, nasty nasty. DanielS, consider yourself smacked around with a mackarel. (Never heard of "cvs export"?) I'm going to regenerate the xfree86_4.3.0.orig.tar.gz at some point to strip out those silly CVS directories. Any objections? -- G. Branden Robinson| You live a

Re: libXau in xlibs-pic?

On Wed, Jun 18, 2003 at 01:53:58PM -0400, Eric Dorland wrote: > * Branden Robinson ([EMAIL PROTECTED]) wrote: > > If you have urgent needs and if there is a 4.2.1-9 release, it should be > > feasible to get libXau into xlibs-pic. Please let us know if this is > > the case (that is, that you have u

Re: 4.3.0 wishlist item

[Thomas, are you subscribed to this list?] On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: > To all members of the X Strike Force: > > Please include the CVS HEAD version of the SiS driver (which compiles > and works with 4.3.0) in Debian's upcoming 4.3.0 release. > > The d

Re: 4.3.0 wishlist item

Branden Robinson wrote: [Thomas, are you subscribed to this list?] [Actually, no. I can hardly follow the lists I already am subscribed to, but I read the archives once or twice a week.] I heard the driver interface has changed in HEAD. Does that break binary compatibility only, or source compat

Re: nasty CVS directories all over 4.3.0 .orig.tar.gz

On Wed, Jun 18, 2003 at 04:38:22PM -0500, Branden Robinson wrote: > Ugh, nasty nasty. > > DanielS, consider yourself smacked around with a mackarel. (Never heard > of "cvs export"?) > > I'm going to regenerate the xfree86_4.3.0.orig.tar.gz at some point to > strip out those silly CVS directories

Re: 4.3.0 wishlist item

On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: > Please include the CVS HEAD version of the SiS driver (which compiles > and works with 4.3.0) in Debian's upcoming 4.3.0 release. > > The driver from CVS HEAD is much improved compared to the original 4.3.0 > version. This st

branches-4.3.0-sid-debian-2003.06.18

Has anyone else noticed that the repository snapshots for the 4.3.0-sid branch hasn't been buildable for a few days now? Using the xfree86 4.3.0 tarball there and the snapshot branches-4.3.0-sid-debian-2003.06.18.tar.gz I get an error... make[4]: Entering directory `/home/howarth/debian-xfree8

Re: 4.3.0 wishlist item

Daniel Stone wrote: On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: Please include the CVS HEAD version of the SiS driver (which compiles and works with 4.3.0) in Debian's upcoming 4.3.0 release. The driver from CVS HEAD is much improved compared to the original 4.3.0 versi

Do you know...

-d4c8msool8qc2.n83tf11vrgz5.4onb5u2jo8zvw.mpcc0b258cu- Feel younger, get rid of wrinkles, have more energy! More Info Here! Original Message [EMAIL PROTECTED] wrote: > behave!

Re: 4.3.0 wishlist item

On Thu, Jun 19, 2003 at 01:34:21AM +0200, Thomas Winischhofer wrote: > Daniel Stone wrote: > >On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: > >>Please include the CVS HEAD version of the SiS driver (which compiles > >>and works with 4.3.0) in Debian's upcoming 4.3.0 release.

Re: X Strike Force SVN commit: rev 209 - branches/4.3.0/sid/debian/patches

On Wed, Jun 18, 2003 at 07:31:54PM -0400, Jack Howarth wrote: >Has anyone else noticed that the repository snapshots for > the 4.3.0-sid branch hasn't been buildable for a few days now? > Using the xfree86 4.3.0 tarball there and the snapshot > branches-4.3.0-sid-debian-2003.06.18.tar.gz I get

i810 3d rendering bug

Hello all. I'm trying to debug a problem we're having with the i810 driver and the 2.4.20 kernel. It seems to me that since we began using the 2.4.20 kernel, 3d support for the i810 has been very broken. You can see what I mean by looking at this screen shot: http://info.lindows.com/tomw/i810bug

Re: branches-4.3.0-sid-debian-2003.06.18

> In <[EMAIL PROTECTED]> > Jack Howarth <[EMAIL PROTECTED]> wrote: >>Has anyone else noticed that the repository snapshots for >> the 4.3.0-sid branch hasn't been buildable for a few days now? >> Using the xfree86 4.3.0 tarball there and the snapshot >> branches-4.3.0-sid-debian-2003

Re: i810 3d rendering bug

Oh, I also tried the 4.3.0 i810 driver, as Michel Danzer suggested here: http://lists.debian.org/debian-x/2003/debian-x-200301/msg00344.html and the problem still occurs. -- michael cardenas | GNU/Linux software developer hyperpoem.net | lead software engineer, lindows.com peopl

Re: 4.3.0 wishlist item

On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: > > To all members of the X Strike Force: > > Please include the CVS HEAD version of the SiS driver (which compiles > and works with 4.3.0) in Debian's upcoming 4.3.0 release. > > The driver from CVS HEAD is much improved comp

Re: 4.3.0-0pre1v1 [XSF, please read]

> In <[EMAIL PROTECTED]> > Daniel Stone <[EMAIL PROTECTED]> wrote: >> Hi all, >> The following is a list of the things *I* think still need to be done >> for 4.3.0-0pre1v1. It should not be considered an official XSF document, >> or anything of the sort. If anyone has any comments, plea

Re: In woody wdm garbles list of window managers, shows only a few

TR wrote: I am using wdm to login to X, but it shows only a few of the possible window managers. However, all of them are there: Line from /etc/X11/wdm/wdm-config: DisplayManager*wdmWm: afterstep:amiwm:asclassic:blackbox:default:enlightenment:fluxbox:flwm:fvwm2:fvwm95:gnome-session:g

Re: 4.3.0-0pre1v1 [XSF, please read]

On Wed, Jun 18, 2003 at 03:10:31PM +0900, ISHIKAWA Mutsumi wrote: > Current status: > xcursor is already installed into sid. So it is - thanks. My p.d.o search on "xcursor" turned up nothing. > build checks are done on i386/sparc/alpha. See p/d/STATUS for info on whether the various architectu

诚信圣通－－停车场全自动收发卡机！

debian-x:您好! 北京诚信圣通科技有限责任 公司网址：http://www.spwe.com 非接触式IC卡收卡机（SPW-CFJ-01B）： 工作过程描述： 1、当车辆压上发卡机前的线圈后，司机按按扭，发卡机连续完成准备卡、 读写、计数、发出系列动作，发出一张卡。 2、支持外部刷卡：司机自带的卡（如公务卡、月票卡等）可直接在外部刷卡。 3、司机取卡后，栏杆抬起，通行灯变绿，车辆通过栏杆；栏杆上的红外检测 器识别出车辆经过，栏杆控制器控制栏杆落下，同时给出信号给入口控制器， 这时下一辆车可以取卡通行； 4、内置的控制器可以通过串口通讯口（RS232）从上位机

adding VIA driver to backported woody XFree86 4.3 - ABI minor version problem

Hi, I have a VIA EPIA-M 1. I installed Debian Woody on it (0) Anyway, I cannot use Woody's default XFree86 package. I need to use the latest XFree, as the drivers for the S3 VIA CLE266 chipset have been included in the tree in April. See Bugzilla #154. First release using it is XFree 4.3.99.3

Re: adding VIA driver to backported woody XFree86 4.3 - ABI minor version problem

On Wed, Jun 18, 2003 at 11:02:23AM +0200, Jerome Lacoste wrote: > I've found Daniel's woody backported packages (1). But as his package > doesn't contain my driver, I thought of getting the via driver from > XFree source, compile it and add it to the > /usr/X11R6/lib/modules/drivers/ directory. Yo

Re: adding VIA driver to backported woody XFree86 4.3 - ABI minor version problem

On Wed, Jun 18, 2003 at 07:58:15PM +1000, Daniel Stone wrote: > On Wed, Jun 18, 2003 at 11:02:23AM +0200, Jerome Lacoste wrote: > > I've found Daniel's woody backported packages (1). But as his package > > doesn't contain my driver, I thought of getting the via driver from > > XFree source, compile

Re: adding VIA driver to backported woody XFree86 4.3 - ABI minor version problem

On Wed, 2003-06-18 at 11:58, Daniel Stone wrote: > On Wed, Jun 18, 2003 at 11:02:23AM +0200, Jerome Lacoste wrote: > > I've found Daniel's woody backported packages (1). But as his package > > doesn't contain my driver, I thought of getting the via driver from > > XFree source, compile it and add i

Re: libXau in xlibs-pic?

> In <[EMAIL PROTECTED]> > Eric Dorland <[EMAIL PROTECTED]> wrote: >> I've packaged XCB , but I was in >> violation of policy because the shared libraries were not compiled >> with -fPIC. I fixed that but unfortunately the lib uses libXau which >> only comes

Re: libXau in xlibs-pic?

> In <[EMAIL PROTECTED]> > ISHIKAWA Mutsumi <[EMAIL PROTECTED]> wrote: >> > In <[EMAIL PROTECTED]> >> >Eric Dorland <[EMAIL PROTECTED]> wrote: >> >> I've packaged XCB , but I was in >> >> violation of policy because the shared libraries were

X Strike Force SVN commit: rev 209 - branches/4.3.0/sid/debian/patches

Author: ishikawa Date: 2003-06-18 09:38:15 -0500 (Wed, 18 Jun 2003) New Revision: 209 Modified: branches/4.3.0/sid/debian/patches/909_debian_piclib_support.diff Log: cosmetic fix, add missing #endif Modified: branches/4.3.0/sid/debian/patches/909_debian_piclib_support.diff ==

Bug#197918: xfonts-100dpi: Helvetica (adobe) not exported through xfs

Package: xfonts-100dpi Version: 4.2.1-6 Severity: important Hi! I'm setting up a Linux Thin-Client that uses the X client applications and fonts from this server. The applications and fonts work fine, except for the "Helvetica (adobe)" *bold* font, which is the default sans-serif font for Galeo

Processed: severity of 197918 is normal

Processing commands for [EMAIL PROTECTED]: > severity 197918 normal Bug#197918: xfonts-100dpi: Helvetica (adobe) not exported through xfs Severity set to `normal'. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (adm

Re: libXau in xlibs-pic?

On Tue, Jun 17, 2003 at 10:20:44PM -0400, Eric Dorland wrote: > I've packaged XCB , but I was in > violation of policy because the shared libraries were not compiled > with -fPIC. I fixed that but unfortunately the lib uses libXau which > only comes in a static non-pic

Re: X Strike Force SVN commit: rev 209 - branches/4.3.0/sid/debian/patches

On Wed, Jun 18, 2003 at 09:38:31AM -0500, X Strike Force SVN Admin wrote: > Author: ishikawa > Date: 2003-06-18 09:38:15 -0500 (Wed, 18 Jun 2003) > New Revision: 209 > > Modified: >branches/4.3.0/sid/debian/patches/909_debian_piclib_support.diff > Log: > cosmetic fix, add missing #endif Eh?

4.3.0 wishlist item

To all members of the X Strike Force: Please include the CVS HEAD version of the SiS driver (which compiles and works with 4.3.0) in Debian's upcoming 4.3.0 release. The driver from CVS HEAD is much improved compared to the original 4.3.0 version. This step would save me a lot of user enquir

X Strike Force SVN commit: rev 210 - /

Author: branden Date: 2003-06-18 11:48:45 -0500 (Wed, 18 Jun 2003) New Revision: 210 Added: HACKING Log: add HACKING file including proposed policies from earlier this month Added: HACKING == --- HACKING 2003-06-1

X Strike Force SVN commit: rev 211 - /

Author: branden Date: 2003-06-18 11:51:15 -0500 (Wed, 18 Jun 2003) New Revision: 211 Added: COMMITTERS Log: add file enumerating the folks with commit access to the repo, and briefly (and whimsically) describing their responsibilities Added: COMMITTERS

X Strike Force SVN commit: rev 212 - /

Author: branden Date: 2003-06-18 12:01:26 -0500 (Wed, 18 Jun 2003) New Revision: 212 Modified: HACKING README Log: move checkout/export policy from README to HACKING, since it is only applicable to those with the power to checkout or export from the repository Modified: HACKING ===

Re: libXau in xlibs-pic?

* Branden Robinson ([EMAIL PROTECTED]) wrote: > On Tue, Jun 17, 2003 at 10:20:44PM -0400, Eric Dorland wrote: > > I've packaged XCB , but I was in > > violation of policy because the shared libraries were not compiled > > with -fPIC. I fixed that but unfortunately the l

X Strike Force SVN commit: rev 213 - /

Author: branden Date: 2003-06-18 13:10:11 -0500 (Wed, 18 Jun 2003) New Revision: 213 Modified: README Log: README: very minor cosmetic updates Modified: README == --- README 2003-06-18 17:01:26 UTC (rev 212) +++

Bug#197965: xterm: pasting is VERY slow in an utf-8 environnement

Package: xterm Version: 4.2.1-8 Severity: minor compare xterm/uxterm with LANG=$$$.UTF-8 and LANG=C , with utf8 you can actually see every character being written on the term :( -- System Information: Debian Release: testing/unstable Architecture: i386 Kernel: Linux Xzeus 2.4.21-ck1 #1 Mon Jun 1

nasty CVS directories all over 4.3.0 .orig.tar.gz

Ugh, nasty nasty. DanielS, consider yourself smacked around with a mackarel. (Never heard of "cvs export"?) I'm going to regenerate the xfree86_4.3.0.orig.tar.gz at some point to strip out those silly CVS directories. Any objections? -- G. Branden Robinson| You live a

Re: libXau in xlibs-pic?

On Wed, Jun 18, 2003 at 01:53:58PM -0400, Eric Dorland wrote: > * Branden Robinson ([EMAIL PROTECTED]) wrote: > > If you have urgent needs and if there is a 4.2.1-9 release, it should be > > feasible to get libXau into xlibs-pic. Please let us know if this is > > the case (that is, that you have u

Re: 4.3.0 wishlist item

[Thomas, are you subscribed to this list?] On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: > To all members of the X Strike Force: > > Please include the CVS HEAD version of the SiS driver (which compiles > and works with 4.3.0) in Debian's upcoming 4.3.0 release. > > The d

Re: 4.3.0 wishlist item

Branden Robinson wrote: [Thomas, are you subscribed to this list?] [Actually, no. I can hardly follow the lists I already am subscribed to, but I read the archives once or twice a week.] I heard the driver interface has changed in HEAD. Does that break binary compatibility only, or source

Re: nasty CVS directories all over 4.3.0 .orig.tar.gz

On Wed, Jun 18, 2003 at 04:38:22PM -0500, Branden Robinson wrote: > Ugh, nasty nasty. > > DanielS, consider yourself smacked around with a mackarel. (Never heard > of "cvs export"?) > > I'm going to regenerate the xfree86_4.3.0.orig.tar.gz at some point to > strip out those silly CVS directories

Re: 4.3.0 wishlist item

On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: > Please include the CVS HEAD version of the SiS driver (which compiles > and works with 4.3.0) in Debian's upcoming 4.3.0 release. > > The driver from CVS HEAD is much improved compared to the original 4.3.0 > version. This st

branches-4.3.0-sid-debian-2003.06.18

Has anyone else noticed that the repository snapshots for the 4.3.0-sid branch hasn't been buildable for a few days now? Using the xfree86 4.3.0 tarball there and the snapshot branches-4.3.0-sid-debian-2003.06.18.tar.gz I get an error... make[4]: Entering directory `/home/howarth/debian-xfree8

Re: 4.3.0 wishlist item

Daniel Stone wrote: On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: Please include the CVS HEAD version of the SiS driver (which compiles and works with 4.3.0) in Debian's upcoming 4.3.0 release. The driver from CVS HEAD is much improved compared to the original 4.3.0 ve

Do you know...

-d4c8msool8qc2.n83tf11vrgz5.4onb5u2jo8zvw.mpcc0b258cu- Feel younger, get rid of wrinkles, have more energy! More Info Here! Original Message debian-x@lists.debian.org wrote: > behave!

Re: 4.3.0 wishlist item

On Thu, Jun 19, 2003 at 01:34:21AM +0200, Thomas Winischhofer wrote: > Daniel Stone wrote: > >On Wed, Jun 18, 2003 at 06:31:50PM +0200, Thomas Winischhofer wrote: > >>Please include the CVS HEAD version of the SiS driver (which compiles > >>and works with 4.3.0) in Debian's upcoming 4.3.0 release.

Re: X Strike Force SVN commit: rev 209 - branches/4.3.0/sid/debian/patches

On Wed, Jun 18, 2003 at 07:31:54PM -0400, Jack Howarth wrote: >Has anyone else noticed that the repository snapshots for > the 4.3.0-sid branch hasn't been buildable for a few days now? > Using the xfree86 4.3.0 tarball there and the snapshot > branches-4.3.0-sid-debian-2003.06.18.tar.gz I get

i810 3d rendering bug

Hello all. I'm trying to debug a problem we're having with the i810 driver and the 2.4.20 kernel. It seems to me that since we began using the 2.4.20 kernel, 3d support for the i810 has been very broken. You can see what I mean by looking at this screen shot: http://info.lindows.com/tomw/i810bug

Re: branches-4.3.0-sid-debian-2003.06.18

> In <[EMAIL PROTECTED]> > Jack Howarth <[EMAIL PROTECTED]> wrote: >>Has anyone else noticed that the repository snapshots for >> the 4.3.0-sid branch hasn't been buildable for a few days now? >> Using the xfree86 4.3.0 tarball there and the snapshot >> branches-4.3.0-sid-debian-2003

Re: i810 3d rendering bug

Oh, I also tried the 4.3.0 i810 driver, as Michel Danzer suggested here: http://lists.debian.org/debian-x/2003/debian-x-200301/msg00344.html and the problem still occurs. -- michael cardenas | GNU/Linux software developer hyperpoem.net | lead software engineer, lindows.com peopl