Hi all,
I was recently told that ALSA doesn't normally allow sharing a soundcard
with two applications, but there are two ALSA plugins, dsnoop and dmix
to share capture and playback respectively. I spent some time in
searching the web for possible info on how to install or how to check if
tho
On 11/21/21 9:33 PM, Georgi Naplatanov wrote:
On 11/21/21 20:57, Miroslav Skoric wrote:
Hi all,
I was recently told that ALSA doesn't normally allow sharing a soundcard
with two applications, but there are two ALSA plugins, dsnoop and dmix
to share capture and playback respectively. I
On 11/22/21 1:04 AM, Dan Ritter wrote:
The dmix plugin is installed by default.
$ aplay -L|grep dmix
dmix:CARD=HDMI,DEV=3
dmix:CARD=Generic,DEV=0
The dsnoop plugin is installed by default:
$ arecord -L|grep dsnoop
dsnoop:CARD=Generic,DEV=0
dsnoop:CARD=Generic,DEV=2
You configure them either
Hi all,
After the recent upgrade of Firefox (and Thunderbird) in oldoldstable
(Mate desktop), Firefox always asks me to be default browser, even
though I have set it as default in Mate's default applications, and
respond to that asking by click on 'dont ask me again'.
Furthermore, Thunderbir
Hi all,
After the recent upgrade of Firefox and Thunderbird in oldoldstable
(Mate desktop), about a month ago or so, when the versions changed from
60-something to 90-something, Firefox annoyingly keeps asking me to be
the default browser, even though I always respond to that asking by
click
Hi all,
Yesterday I attempted to upgrade Compaq Presario CQ56 laptop to buster.
I followed instructions in 'Chapter 4. Upgrades from Debian 9
(stretch)', so all went well with a minimal upgrade (apt-get upgrade).
When it finished, I went to the main part of the upgrade (apt
full-upgrade). It
On 7/3/22 1:17 PM, Andrew M.A. Cater wrote:
Ctrl-Alt-F2 brings tty2 from where I can log in, then sudo etc. df -h shows
that filesystem /dev/mapper/localhost-root (mounted on /) is 99% used, and
/dev/mapper/localhost-usr (mounted on /usr) is 100% used.
Apt tends to store files in /var - it's
On 7/3/22 4:28 PM, Miroslav Skoric wrote:
Haven't tried that, but something else already helped: While it was
idling with fsck in tty1, I went to tty2 and entered: apt --fix-broken
install ... and it did/resumed full upgrade. (Interestingly, this time
it did not complain about no spa
On 7/3/22 7:51 PM, David Christensen wrote:
On 7/3/22 02:31, Miroslav Skoric wrote:
Hi all,
Yesterday I attempted to upgrade Compaq Presario CQ56 laptop to
buster. I followed instructions in 'Chapter 4. Upgrades from Debian 9
(stretch)', so all went well with a minimal upgrad
On 7/5/22 9:37 AM, Tom Dial wrote:
Post the output from
# fdisk -l (or $ sudo fdisk -l)
# vgdisplay -v (or $ sudo vgdisplay -v)
Here it is:
# fdisk -l
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Disk model: Hitachi HTS54323
Units: sectors of 1 * 512 = 512 bytes
Sector si
I have an old comp (CPU Pentium II Celeron 400 MHz, 224 MB RAM) running
ham radio server in Debian 8. It works well in CLI, but very slow after
starting GUI. I wonder whether it would be worth to try (if possible at
all) to upgrade it to Debian 9. Any experience with such old boxes?
Misko YT7M
On 11/11/20 7:09 PM, Linux-Fan wrote:
Pentium II is old indeed. Whenever using old processors, it is important
to test if the new kernel will still support them.
So maybe I shall try some newer kernel only?
On 11/11/20 7:42 PM, Felix Miata wrote:
I have an old comp (CPU Pentium II Celeron 400 MHz, 224 MB RAM) running
ham radio server in Debian 8. It works well in CLI, but very slow after
starting GUI. I wonder whether it would be worth to try (if possible at
all) to upgrade it to Debian 9. Any ex
On 11/11/20 9:43 PM, Charles Curley wrote:
I have an old comp (CPU Pentium II Celeron 400 MHz, 224 MB RAM)
running ham radio server in Debian 8. It works well in CLI, but very
slow after starting GUI. I wonder whether it would be worth to try
(if possible at all) to upgrade it to Debian 9. Any
On 11/11/20 7:09 PM, Greg Wooledge wrote:
Upgrading to a newer release is not likely to make it faster. If anything,
it'll be slower (due to increased memory demands of newer software).
That's something I have already experienced with previous upgrades. But
it was always in full GUI (eithe
On 11/13/20 2:36 AM, Doug McGarrett wrote:
I have been only cursorily following here, since I don't use debian, but
I wonder if you might
consider upgrading your mother board to a new one the same size and
shape, with
a faster processor and probably more ram. Then the latest version of deb
wou
On 11/11/20 10:24 PM, Felix Miata wrote:
...PS: Pentium II and Celeron are two processors.
Celeron is a budget family of Intel processors, based upon Pentium II, III, 4
and
newer Pentium processors. Pentium II Celeron means a Celeron based upon the
Pentium II family, the oldest family of Ce
On 11/13/20 12:12 AM, Linux-Fan wrote:
Miroslav Skoric writes:
On 11/11/20 7:09 PM, Linux-Fan wrote:
Pentium II is old indeed. Whenever using old processors, it is
important to
test if the new kernel will still support them.
So maybe I shall try some newer kernel only?
If you have an
On 11/12/20 9:53 AM, Michael Lange wrote:
A really good option in this field is IceWM. It has everything a typical
user needs out-of-the-box and is extremely lightweight (and themeable).
From my own experience I agree about that.
Still, the tricky part will be to choose other gui programs
On 11/13/20 3:52 PM, Andrei POPESCU wrote:
Beware that LTS support for jessie ended in June 2020.
https://www.debian.org/releases/jessie/
That system should be upgraded to some release with security support as
soon as possible, especially since it's dealing with e-mail as far as I
understand
On 11/13/20 9:29 PM, David Wright wrote:
I would have thought that Debian has made kernel testing just about as
easy as they can since:
jessie installs with 3.16 but 4.9 is also available,
stretch installs with 4.9 but 4.19 is also available,
buster installs with 4.19
so there's full overla
Hello,
After upgrading the old laptop from jessie to strech, it worked well for
few days (although more slowly than it was with jessie). But after last
proper shutdown, it does not boot anymore. In fact, it starts to boot
until it comes to a point where it says:
"You are in emergency mode. A
On 8/31/19 3:26 PM, Reco wrote:
Boot with init=/bin/bash kernel commandline parameter, remount root
filesystem read-write, fix your /etc/fstab (systemd is picky about
filesystems it's not able to mount, and no, "noauto" won't fix it),
reboot once more.
Reco
Hi,
Sorry for my ignorance, but
On 8/31/19 3:26 PM, Étienne Mollier wrote:
Perhaps you can attempt a boot in "Recovery Mode", see the
"Advanced Boot Options" at the Grub menu stage of the boot.
It could have a positive effect if a faulty kernel module is
loaded and causes this loop in the boot sequence. Maybe a check
of the
On 8/31/19 3:26 PM, Étienne Mollier wrote:
Maybe a check
of the memory and SMART data, if those options are available
from your BIOS, could be welcome, especially SMART since some
messages were mentioning checking the disk.
I checked the system memory and hard disk self test (quick test and
On 8/31/19 3:48 PM, Reco wrote:
On Sat, Aug 31, 2019 at 03:41:12PM +0200, Miroslav Skoric wrote:
On 8/31/19 3:26 PM, Reco wrote:
Boot with init=/bin/bash kernel commandline parameter, remount root
filesystem read-write, fix your /etc/fstab (systemd is picky about
filesystems it's not
On 9/1/19 1:20 PM, Étienne Mollier wrote:
Hi Miroslav,
Pascal is probably right. If you manage to have access to the
command "dumpe2fs" in your rescue environment, what is the
output of:
# dumpe2fs /dev/mapper/localhost-home | grep '^Filesystem features:'
Actual Ext3 should probably
On 9/1/19 5:33 PM, Reco wrote:
So, let's do something easy and non-destructive first (I assume that
/tmp does not contain anything useful):
tune2fs -l /dev/localhost/tmp
fsck.ext3 -f -n /dev/localhost/tmp
fsck.ext4 -f -n /dev/localhost/tmp
fsck.ext3 -b 8193 -f -n /dev/localhost/tmp
fsck.ex
On 9/1/19 8:40 PM, Pascal Hambourg wrote:
Le 01/09/2019 à 17:01, Miroslav Skoric a écrit :
EXT3-fs (dm-6): error: couldn't mount because of unsupported optional
features (8000)
This is not the same as the previous error message you showed while
using the Debian Jessie 8.11 install
On 9/2/19 12:26 AM, Pascal Hambourg wrote:
Le 01/09/2019 à 22:59, Miroslav Skoric a écrit :
root@(none):/# uname -a
Linux (none) 3.2.0-4-486 #1 Debian 3.2.96-2 i686 GNU/Linux
So you upgraded from Jessie to Stretch but still ran the old kernel from
Wheezy all this time ? Wow.
Sure. I
On 9/1/19 7:52 PM, Étienne Mollier wrote:
The output of the above command (version dumpe2fs 1.43.4
31-Jan-2017) is the same as yours, with *one addition*:
inline_data
Good news, this is consistent with Reco's observation in the
other thread. Follows his recommendations and see what happens.
On 9/2/19 5:39 PM, Reco wrote:
Hi.
On Mon, Sep 02, 2019 at 04:44:18PM +0200, Miroslav Skoric wrote:
On 9/2/19 10:28 AM, Reco wrote:
Judging from the pictures, it's the ext4 filesystem.
So, let's proceed to the destructive steps:
fsck.ext4 -f /dev/localhost/tmp
mount -t
On 9/2/19 1:19 AM, Pascal Hambourg wrote:
Sure. I upgraded Jessie to Stretch last week. And it worked well for
me until Friday eve. (And before that I upgraded Wheezy to Jessie cca
year ago. It worked well for me too.)
Until is doesn't work any more. You cannot run a new system with an old
On 9/3/19 7:55 AM, Reco wrote:
However, I wonder whether the other partitions (/, /usr, /var) shall
remain ext3 in fstab, or they shall be changed to ext4 too.
blkid has an answer for that. If it says that your /, /usr and /var are
ext3 - leave them as that.
Reco
Exactly, blkid said ju
Hello,
After upgrading the old laptop from Jessie to Stretch, I noticed that
the screensaver in Mate environment does not work for me as before. For
example, when the screen goes black after some time of inactivity, for
returning back it is not enough just to touch the touchpad or press any
k
On 9/10/19 8:11 PM, Christopher David Howie wrote:
On 9/10/19 4:30 AM, Miroslav Skoric wrote:
After upgrading the old laptop from Jessie to Stretch, I noticed that
the screensaver in Mate environment does not work for me as before. For
example, when the screen goes black after some time of
On 9/11/19 12:12 AM, Ben Caradoc-Davies wrote:
I saw the same problem when I tried lightlocker after upgrading to XFCE
4.14, so I went back to good old xscreensaver. Ugly bitmaps fonts and no
theming, but secure and reliable. There is a new locker in XFCE, but
there have been reports of segf
After a recent Thunderbird upgrade in Buster (from version 91-something
to 101-something, or like), it stopped handling newsgroups properly
(where the source is News Server (NNTP) on the same machine, and there
nothing was changed/upgraded).
To be precise, Thunderbird now seems downloading new
On 10/6/22 1:05 AM, Ralph Katz wrote:
On 10/5/22 07:08, Miroslav Skoric wrote:
After a recent Thunderbird upgrade in Buster (from version
91-something to 101-something, or like), it stopped handling
newsgroups properly (where the source is News Server (NNTP) on the
same machine, and there
Is there a good software for Debian 7.7 as well as for Debian 6.10 that
is capable to produce a multi DVD/CD image of a working system, in a way
that such image can be used later as a DVD/CD installation media for
'cloning' on the other comps (or on itself, in case of an irreparable
failure of
Is there a good software for Debian 7.7 as well as for Debian 6.10
that is capable to produce a multi DVD/CD image of a working system,
in a way that such image can be used later as a DVD/CD installation
media for 'cloning' on the other comps (or on itself, in case of an
irreparable failure of a w
On 06/22/2014 03:29 PM, Pascal Hambourg wrote:
Miroslav Skoric a écrit :
1. What would you do if you need more space in /tmp and you know you
have some spare space in /home or else, but do not want to reinstall?
If you are in such a situation, then you missed one of the goals of LVM.
You
Is there a good replacement for Sony's PMB software? I mean, something
that can import both photos and videos from a camera, and store & play
them in the order of date/time of recording.
M.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trou
On 03/19/2014 01:42 AM, Scott Ferguson wrote:
After all, the clock keeps ticking and Debian squeeze is going to reach
its End of Life in less than two months otherwise."
Whatever happens, I'd keep 'Squeeze LTS' for at least a couple of years
more, if for nothing else but for keeping the ol
Hi,
I have encrypted LVM on one of my Wheezy machines, and recently noticed
that /tmp space was too low for one application (In fact it was about
350 MB and I wanted it to be around 2.5 GB). So I tried to make /tmp
space bigger while I was mounted and online, but vgdisplay reported no
free sp
On 06/01/2014 11:03 PM, emmanuel segura wrote:
i think the correct steps are:
resize2fs /dev/mapper/localhost-home -2G
lvresize --size -2G /dev/mapper/localhost-home
Thank you. I tried with the first command but it did not work (it
returned an error).
However later I managed to resize t
On 06/01/2014 11:36 PM, Jochen Spieker wrote:
If you don't have a
backup you can try to resize the LV again to its original size and hope
for the best.
BTW, I found it to be good practice to initially use less than 100% of
available space on my PVs for the LVs. That way I can grow filesystems
On 06/05/2014 11:29 AM, Jochen Spieker wrote:
Miroslav Skoric:
On 06/01/2014 11:36 PM, Jochen Spieker wrote:
If you don't have a
backup you can try to resize the LV again to its original size and hope
for the best.
Thanks for suggestions. Yep, I managed to return back to the
original
On 06/05/2014 11:04 AM, Bob Proulx wrote:
Richard Hector wrote:
I prefer not to get in the situation where I have to shrink a filesystem
though - xfs doesn't support it anyway.
Agreed. Even better is to avoid it. Small ext{3,4} file systems
shrink acceptably well. But larger ext{3,4} file
On 06/05/2014 08:42 AM, Richard Hector wrote:
If I have to shrink a filesystem, I tend to shrink it to something
smaller than my eventual goal, then shrink the LV to the goal, then
resize2fs again without specifying the size, so it grows to fit.
I prefer not to get in the situation where I ha
On 06/15/2014 10:52 PM, Reco wrote:
No, it seems to belong to main archive.
$ apt-cache search apt on cd | grep ^apt
apt - commandline package manager
aptdaemon - transaction based package management service
aptoncd - Installation disc creator for packages downloaded via APT
Yep, aptoncd wa
I upgraded the other day, and noticed some differences between my
desktop appearance (Gnome) and what is described in the Help. According
to Help, there should be some Activities menu or something like that in
the upper left corner, but only I see is Applications and Places in that
screen area.
On 01/08/2018 04:57 PM, Roberto C. Sánchez wrote:
Hi all,
This is semi-OT but I am curious to know what temperature/humidity/flood
sensors everyone out there has experience with.
I am looking for something to use at home, but I would like to stay away
from WiFi and smart home devices. Basical
On 05/21/2018 03:55 PM, David Wright wrote:
As for appendix C in the Installation Manual, well that looks like
a bit of a joke: who's running linux in 256MB memory, let alone 16MB?
One of my older machines still runs Wheezy LTS in 224 MB RAM. And soon I
am going to try an upgrade to Jessie.
After upgrading from Wheezy LTS to Jessie, one of my machines having 512
MB RAM, does not power off when it reached target shutdown. It seems
some old issue/bug with systemd or else. In fact, everything closes down
properly except it does not unmount the following:
/run/user/1000
/run/user/106
On 05/31/2018 04:18 PM, Curt wrote:
On 2018-05-31, Miroslav Skoric wrote:
After upgrading from Wheezy LTS to Jessie, one of my machines having 512
MB RAM, does not power off when it reached target shutdown. It seems
some old issue/bug with systemd or else. In fact, everything closes down
On 05/31/2018 08:01 AM, Miroslav Skoric wrote:
After upgrading from Wheezy LTS to Jessie, one of my machines having 512
MB RAM, does not power off when it reached target shutdown. It seems
some old issue/bug with systemd or else. In fact, everything closes down
properly except it does not
On 06/04/2018 03:12 PM, Curt wrote:
I'm really too ignorant to be answering questions and should be asking some.
However I can't think of any.
Except: any clues in the logs?
Look here:
/usr/share/doc/systemd/README.Debian.gz
under
Debugging boot/shutdown problems
===
On 06/10/2018 06:33 PM, The Wanderer wrote:
On 2018-05-31 at 02:01, Miroslav Skoric wrote:
After upgrading from Wheezy LTS to Jessie, one of my machines having 512
MB RAM, does not power off when it reached target shutdown. It seems
some old issue/bug with systemd or else. In fact, everything
Hello all,
Intro: I have been using LILO for ages. Now running Wheezy 7.11 LTS. As
usual and for test purposes on older machines I have two kernel
flavours: 486 and 686-rt. In LILO boot menu they appear as Linux486 and
Linux686 (before renaming they were Linux and LinuxOLD). Both work nice
on
On 01/14/2017 05:38 PM, Stephen Powell wrote:
On Sat, Jan 14, 2017, at 10:05, Richard Owlett wrote:
On 1/14/2017 8:45 AM, Miroslav Skoric wrote:
Hello all,
Intro: I have been using LILO for ages. Now running Wheezy 7.11
LTS. As usual and for test purposes on older machines I have two
kernel
Hi,
After the last kernel update and restart, a wheezy-based machine (laptop
running 7.9) boots to some point, however it freezes just before opening
GUI. Access to CLI (Ctrl-Alt-F1 etc) is also not possible. What to do to
recover?
Regards,
M.
On 10/07/2015 08:56 AM, Riley Baird wrote:
After the last kernel update and restart, a wheezy-based machine (laptop
running 7.9) boots to some point, however it freezes just before opening
GUI. Access to CLI (Ctrl-Alt-F1 etc) is also not possible. What to do to
recover?
Debian saves your old k
On 10/08/2015 10:58 AM, Riley Baird wrote:
rescue CLI?
If dpkg is available during the rescue CLI, you can install the .deb file
using the command
$ dpkg -i /path/to/packagename.deb
Riley, that was the solution I looked for and dpkg did the job. I
reinstalled the previous kernel and remov
On 10/08/2015 12:37 AM, Brad Rogers wrote:
Thanks. Well I do not have GRUB here but LILO, and there are no saved
old kernels as long as I know.
There should be; Debian doesn't delete old kernels as part of the
upgrade process. Even LILO should have an option to boot older
kernels. Older ker
On 10/09/2015 06:09 PM, Brad Rogers wrote:
If that's true, that's a *serious* bug. LILO (or Grub, come to that)
should never delete kernels. I know Grub doesn't but, as I said before,
I've not used LILO for some years. Even so, I'd be surprised if it could
actually _delete_ kernels like that
On 10/09/2015 05:19 PM, Chris Bannister wrote:
In fact, (and in my case) LILO does delete old kernels during the upgrade,
Wow! I really think that is a bug *if* it does. What makes you think
that is the case?
Ok, let me say it this way: That laptop has 2 different flavours of
kernel, the
On 10/09/2015 08:45 PM, Piyavkin wrote:
I have exactly the same issue with the same kernel-packages. See here:
https://lists.debian.org/debian-user/2015/10/msg00231.html
Yes, my symptom was identical to what you have described there.
Interestingly you use GRUB and not LILO, but even your GR
On 10/10/2015 09:33 PM, Piyavkin wrote:
Miroslav, by the way, what version of BIOS your laptop has?
Insyde F15
On 10/10/2015 09:33 PM, Piyavkin wrote:
Yeah, but if the issue becomes permanent in all the future versions
starting from 3.2.71-2? It's kind of scary.
Good news: After some time waiting, there came version 3.2.73-2 and I
tested it both with 686-rt and 486 flavors. Both work good. No proble
On 12/09/2014 11:11 PM, Andrei POPESCU wrote:
You should probably provide more details about the installation to be
cloned and hardware where the clone will be used.
Kind regards,
Andrei
Here it is:
'Source 1' hardware: Desktop CPU Celeron 400 MHz, RAM 224 MB, HDD 21 GB
(a half of a 41 GB
Hi,
I am not sure now, but probably somewhere during the system upgrade from
squeeze to wheezy, one of my machines somehow 'lost' the ability of the
status line in Gnome GUI to show active programs, normal or [minimized].
What to do to recover that ability?
Regards,
M.
Hi,
I am not sure now how that has happened, but probably somewhere during
the system upgrade from squeeze to wheezy (the upgrade done from within
GUI), one of my machines somehow lost the ability of the status line in
Gnome GUI to show icons of active program windows, either normal or
[minim
I have a dual-boot Win$/Debian box having two cards, an older one 3Com
(3C905TX in Win$, 3c59x in Deb) and a newer one TP Link (TF-3200 in
Win$, sundance in Deb). Both cards are wired to the other two machines
in the LAN, the older card links to an older box, the newer card links
to a newer box
On 02/15/2012 07:25 PM, Christofer C. Bell wrote:
On Wed, Feb 15, 2012 at 11:57 AM, Miroslav Skoric wrote:
I wonder what is the best way to reconfigure the NIC's so the old card (now
eth0) boots as eth1, and the new card (now eth1) boots as eth0?
This is done using the file /etc
On 1/22/24 4:17 PM, Alain D D Williams wrote:
On Mon, Jan 22, 2024 at 03:32:30PM +0100, sko...@uns.ac.rs wrote:
I am getting the following message at any boot:
"The volume "Filesystem root" has only 221.1 MB disk space remaining."
df -h says:
Filesystem Size Used Avail Use
On 1/22/24 4:40 PM, Alain D D Williams wrote:
On Mon, Jan 22, 2024 at 10:29:55AM -0500, Stefan Monnier wrote:
lvextend --size +1G --resizefs /dev/mapper/localhost-home
Ie get lvextend to do the maths & work it out for me.
Those who are cleverer than me might be able to tell you how to get it r
On 1/22/24 6:59 PM, to...@tuxteam.de wrote:
On Mon, Jan 22, 2024 at 03:40:06PM +, Alain D D Williams wrote:
On Mon, Jan 22, 2024 at 10:29:55AM -0500, Stefan Monnier wrote:
lvextend --size +1G --resizefs /dev/mapper/localhost-home
Ie get lvextend to do the maths & work it out for me.
Those
On 1/22/24 5:02 PM, Greg Wooledge wrote:
On Mon, Jan 22, 2024 at 03:17:36PM +, Alain D D Williams wrote:
The shrinking of /home is the hard part. You MUST first unmount /home, then
resize the file system, then resize the logical volume.
Before doing any of that, one should check the volume
On 1/22/24 7:01 PM, to...@tuxteam.de wrote:
Ah, forgot to say: "pvdisplay -m" will give you a "physical" map of
your physical volume. So you get an idea what is where and where
you find gaps.
"pvdisplay -m" provided some idea that there was some free space but (if
I am not wrong) not how mu
On 1/22/24 11:21 PM, Greg Wooledge wrote:
On Mon, Jan 22, 2024 at 10:41:57PM +0100, Miroslav Skoric wrote:
As I need to extend & resize more than one LV in the file system (/, /usr,
and /var), should they all need to be unmounted before the operation? As I
remember, it is ext3 system on
On 1/23/24 7:36 AM, Andy Smith wrote:
ext filesystems do need to be unmounted when shrinking them (they can
grow online, though). When you use the --resizefs (-r) option, LVM asks
you if you wish to unmount. Obviously you cannot do that on a
fiulesystme which is in use, which means you'll need a
On 1/24/24 12:42 AM, Greg Wooledge wrote:
You'll have to unmount it, which generally means you will have to reboot
in single-user mode, or from rescue media, whichever is easier.
If you aren't opposed to setting a root password (some people have *weird*
self-imposed restrictions, seriously), si
On 1/24/24 3:20 AM, Max Nikulin wrote:
On 24/01/2024 06:29, Miroslav Skoric wrote:
# df -h
/dev/mapper/localhost-root 6.2G 4.7G 1.2G 81% /
Taking into account size of kernel packages, I would allocate a few G
more for the root partition.
dpkg -s linux-image-6.1.0-17-amd64 | grep -i
On 1/24/24 11:27 PM, Greg Wooledge wrote:
On Wed, Jan 24, 2024 at 10:43:51PM +0100, Miroslav Skoric wrote:
I do not have root account.
Sure you do. You might not have a root *password* set.
(I use sudo from my user account.) I think I
already tried rescue mode in the past but was not
Hi,
I [partially] upgraded buster to bullseye according to official "Release
Notes for Debian 11 (bullseye), 32-bit PC" (October 4, 2023). I did it
in two sessions as suggested:
"4.4.4 Minimal system upgrade" (# apt upgrade --without-new-pkgs). That
part performed without any issue, and cat
On 1/30/24 1:41 PM, Greg Wooledge wrote:
On Tue, Jan 30, 2024 at 01:19:09PM +0100, Miroslav Skoric wrote:
Unpacking marco-common (1.24.1-3) over (1.20.3-1) ...
.[1mdpkg:.[0m error processing archive
/tmp/apt-dpkg-install-S65GMD/8-marco-common_1.24.1-3_all.deb (--unpack):
trying to overwrite
On 1/30/24 1:40 PM, The Wanderer wrote:
/tmp/apt-dpkg-install-S65GMD/8-marco-common_1.24.1-3_all.deb (--unpack):
trying to overwrite
'/usr/share/themes/Gorilla/metacity-1/metacity-theme-1.xml', which is
also in package gnome-themes-more 0.9.0.deb0.8
Where do you get 'gnome-themes-more' from
On 1/30/24 1:43 PM, Michael Kjörling wrote:
https://www.debian.org/releases/bullseye/amd64/release-notes/ch-upgrading.en.html#file-conflicts
should help.
Sure. Thanks!
Hi!
As I have some Windows software (for ham radio) that does not have
adequate Linux versions, I wanted to install Wine and some related
packages from the bullseye repository (wine, q4wine, winetricks,
playonlinux, etc). By the way, I had Wine with buster earlier, and most
Windows software w
On 2/2/24 9:10 PM, Greg Wooledge wrote:
I am not sure what do you mean by "install that architecture". I have
been using i386 versions of Debian, and I do not plan to reinstall it
now just because the CPU may allow that.
At some point, you will have to make a decision. i386 is going to stop
91 matches
Mail list logo
