Hi,
I am using Kernel 2.4.22 with ALSA. Alsa is working fine so far with KDE,
but it can't get it working with enemy territory.
I get the following error message (from et console output):
[..]
--- sound initialization ---
/dev/dsp: Input/output error
Could not mmap /dev/dsp
Hi,
I believe to have a prism wlan card in my notebook and while digging around
what to do I came to the conclusion that I need a module, which is in
linx-wlan-ng?!
It is a kernel module and part of the official debian distro, isn't it? My
expectation had been to see this turn up in menuc
On a sidebar ... When logging into KDE I do hear sound, but it sounds like it
is played to loud (which it isn't). I believe it is a driver/settings issue
as it was working fine with the other os.
Mariano
On Wednesday 29 October 2003 22:43, Mariano Kamp wrote:
> Hi,
>
> I a
Hi Mark,
thanks for taking the time ...
> > I believe to have a prism wlan card in my notebook and while digging
> > around what to do I came to the conclusion that I need a module, which is
> > in linx-wlan-ng?!
> no, you don't need linux-wlan-ng for this. The stock orinoco_cs driver
> work
Hi Mark,
> > > no, you don't need linux-wlan-ng for this. The stock orinoco_cs driver
> > > works just fine in my laptop.
> > Ok, I get it working without encryption, but not with encryption. Did you
> > get this working with WEP128?
> using which module? the stock orinoco_cs module? Sorry, I do
> On Sat, Sep 06, 2003 at 11:16:02PM +0200, Mariano Kamp wrote:
> > Silly me. After running xhost .. even those last problems vanished...
>
> xhost is great...if you don't mind anybody else being able to read
> your screen and what you're typing remotely without your kno
Hi,
when copying from one ide disk to another ide disk on the the same controller
the whole systems stalls. I am running 2.4.19 on unstable.
When renicing the copying processes it works ok, but I am not sure if that
is the solution. And if that is, how would I do this efficiently. Looking a
Jacob,
thanks for your detailed answer - it works now.
On Tuesday 09 September 2003 05:12, Jacob Anawalt wrote:
> When you ssh with X11 forwarding, and the remote system at least has
> xbase-clients installed (the local would have a full X11 system) there
> should not be a need to use xhost. I
> I've noticed similar effects here. Kernel 2.4.20, but only 1 disk.
> If something pushes the disk hard then most thigns, including xmms
> (which is streaming, not using the disk), becomes unresponsive until
> the heavy disk usage subsides. (I had figured old hardware had
> something to do with
On Monday 08 September 2003 23:13, Geordie Birch wrote:
> Mariano Kamp <[EMAIL PROTECTED]> [08 Sep 2003 22:09 +0200]:
> > when copying from one ide disk to another ide disk on the the same
> > controller the whole systems stalls. I am running 2.4.19 on unstable.
> &
On Tuesday 09 September 2003 03:16, Shyamal Prasad wrote:
> "Mariano" == Mariano Kamp <[EMAIL PROTECTED]> writes:
>
> Mariano> Hi, when copying from one ide disk to another ide disk on
> Mariano> the the same controller the whole systems stalls. I a
> > when copying from one ide disk to another ide disk on the the same
> > controller the whole systems stalls. I am running 2.4.19 on unstable.
>
> Wow. I have the same situation, (can't give you the specs, other than
> to say the primary is a 16GB drive of 1999 era, and the secondary is a
> 40GB
Hi,
a couple of words about my boxes set up at home. I have one box, rock,
connected to a dsl-router on one interface, outside interface, and the remaining
boxes on another interface, inside interface. On rock I use
shorewall/iptables for NAT and blocking all incoming tcp/ip connections. So far
Hi,
a couple of words about my boxes set up at home. I have one box, rock,
connected to a dsl-router on one interface, outside interface, and the
remaining
boxes on another interface, inside interface. On rock I use
shorewall/iptables for NAT and blocking all incoming tcp/ip connections. So
fa
next?
Mariano
On Sat, 2002-09-14 at 05:25, Jaye Inabnit ke6sls wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Friday 13 September 2002 02:18 pm, Mariano Kamp wrote:
> > Ok, problem is I cannot login at all, because the machine is booting up
> > and then c
Hi,
using Gnome with woody it always launches a couple of programs I
recently used (like xemacs, xterm etc.). It also does launch more
instances every time I login.
I greped through all directories starting with a dot for xterm and
xemacs, but haven't found anything. Where is stored what I r
Thanx.It is working now.
I didn't expect to find the solution in the menus ;-)
Anyway, I am still puzzled that my grep didn't return anything.
Mariano
On Sun, 2002-10-27 at 18:06, iain d broadfoot wrote:
> Mariano Kamp wrote:
> > Hi,
> >
> > using Gnome
Hi,
did I get it right that there is no tool available at installation
time to partitionate a hard drive?
---
Another question. I have a box with SuSE left and want to upgrade it
to debian. The box has now two hds and I want to keep the second drive
for the time beeing and after the new sy
Jamin,
thanks for your help.
> > What do I need to do to get the drive formated and to install a
> > journaled file system?
>
> Use a boot kernel that supports the file system you're after. The bf2.4
> kernel supports ext3.
Ok, but I don't intend to format a second drive during the installat
Hi,
a couple of hours ago I used to have a SuSE 8.1, Kernel 2.4.18, system
with an ide and scsi drive. The system used to boot from the scsi drive.
During this morning I wanted to _upgrade_ the system to debian.
Therefore I started the woody installation from cdrom and partitioned
the hd wit
SE I was just used to use it.
Anyway, thanks very much for your detailed answer. I've learned a lot
here.
Mariano
On Fri, 2002-11-01 at 22:29, Seneca wrote:
> On Fri, Nov 01, 2002 at 03:11:57PM +0100, Mariano Kamp wrote:
> > a couple of hours ago I used to have a SuSE 8.1, Ke
Hi Alan,
ok, it's good to hear that it would be possible to use ReiserFS out of
the box. Still I am wondering which problem I did hit then?
In the posting of Seneca he quoted the explanation regarding the lilo
error messages. As far as I understood there is a serious problem with
my hard disk
Hi,
no need to further look at the problem. I am now using the ide drive
as my primary drive and that seems to work. Its just amazing that it did
work before with SuSE also using LILO
Anyway ... thx very much for your help.
Mariano
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
wit
Hi Thomas,
I am using the Sony Access Point and the Sony card. The card works
fine with Linux (PCWA-C100, Orinoco Driver), but the access point can
only be configured from windows which stinks. Both, but especially the
access point, is pretty expensive and I wouldn't go for it again. I
remeber h
> ATM, woody == stable, so if that's the contents of your sources.list,
> you are running woody. If you want to track woody exclusively, you can
> change all references of stable to woody, but this will not upgrade you
> automatically when sarge becomes stable (although I think we won't have
> to
Hi,
I've got a couple of .bin files, which I believe are svcds, aren't they? I
can play them with kplayer, but it is horrible as the sound is skipping. Xine
on the other hand won't play them and reports that it couldn't find a demux?!
Any chance to play these files without skipping? Would
Sebastian, Klaus,
> b) Install vcdimager, and abuse vcdxrip:
>
> vcdxrip -p --nosegments --nofiles -o /dev/null -b
Thanks, that works great.
Cheers,
Mariano
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I remember stumbling over an article some time ago. It was on, I believe,
slashdot referring to an assembly project with the goal of turning a linux
box with a tv card into some sophisticated vcr, with electronic programm
guide and also the ability to stream videos and to record from the
Hi,
k3b was working fine until July or something.
Currently, when I try to burn a file (data cd), and want to select the drive
to use there are no devices to chose from.
I ran kb3 setup and it detects my devices properly, but when relaunching k3b
it still doesn't remeber them anymore.
Hi,
first of all thanks to all people responding.
> Was it MythTV? I stumbled on it once too. Looks pretty cool. I'd try it
> if I was into watching TV.
> http://www.mythtv.org/
Freevo and mythtv look both very cool. I haven't been able to dig up a in
depth comparison, but used the below me
te module block-major-34
Aug 31 17:49:08 black modprobe: modprobe: Can't locate module block-major-34
==> /var/log/syslog <==
[..]
(same as in daemon.log)
Mariano
On Saturday 30 August 2003 23:07, Henning Moll wrote:
> On Saturday 30 August 2003 19:11, Mariano Kamp wrote:
> >
Hi,
I have two boxes, one with X (black) and one without (rock). I want to run
an X Application on rock, but always get the message that it is not possible
to connect to the remote xserver.
What I do is the following:
[EMAIL PROTECTED]:~$ ssh -X rock
The authenticity of host 'rock (192.1
Last login: Sat Sep 6 18:17:49 2003 from black
rock:~# echo $DISPLAY
rock:~#
Do you know what part SSH2 plays here? I am always doing the config changes
in /etc/ssh not in /etc/ssh2.
Cheers,
Mariano
On Saturday 06 September 2003 17:41, you wrote:
> Le Samedi 6 Septembre 2003 17:30, Mari
Hi Colin, Ismael,
thanks very much for the help ... I can see progress now.
> I bet you don't have xbase-clients installed on the remote system.
Yeah, the settings of the DISPLAY variable works fine now.
rock:~# xterm
Xlib: connection to "localhost:10.0" refused by server
Xlib: Invalid MIT-MAG
Silly me. After running xhost .. even those last problems vanished...
On Saturday 06 September 2003 18:28, Mariano Kamp wrote:
> Hi Christophe,
>
> thanks for taking the time.
>
> I double checked the syntax with the man pages and I believe I already
> set it up this way .
Hi,
I accidently have chosen german as the installer language which also
turned out to be the language of my system now. How can I revert to
english?
Cheers,
Mariano
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
a process called ksoftirqd_CPU0 is eating up my cpu ... I recently
returned from apm suspend and now this process eats 95% of my cpu. Oddly
enough I am not able to kill it with kill -9 pid.
Any idea what this process does?
Mariano
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Hi Nicolas,
> > a process called ksoftirqd_CPU0 is eating up my cpu ... I recently
> > returned from apm suspend and now this process eats 95% of my cpu. Oddly
> > enough I am not able to kill it with kill -9 pid.
> It's not odd at all. See below. As to the high CPU usage, it would
> appear tha
Hi,
My googling hasn't been a success so far. It's tough to find the right
keywords ;-(
Can anybody point me out to a howto or a relevant posting about
aquiring/compiling/installing 2.5.69? Or with the right search terms? ;-)
Cheers,
Mariano
--
To UNSUBSCRIBE, email to [EMAIL PROTECT
Hi there,
I am running unstable (and the latest xserver from unstable and the nv bin
module) and haven't restarted my xserver for a couple of days. Today I
dist-upgraded (as I did before) and also restarted mit xserver. Unfortunately
X is not working anymore. Meanwhile I pinned it down to the
Nicos,
thanks for taking the time ...
> I tried on testing, and it worked quite fine with the regular make-kpkg
> routine. You'll have to install the proper module handling utilities (I
> don't know what the name was, but it's listed in the kernel doc and
> available as a debian package).
Hmmh.
Ok, I missed libqt-dev Now I am looking to solve
--->>>
make[1]: Entering directory `/usr/src/kernel-source-2.5.69'
/usr/bin/make -f scripts/Makefile.build obj=scripts
/usr/bin/make -f scripts/Makefile.build obj=scripts/kconfig
scripts/kconfig/qconf
g++ -Wp,-MD,scripts/kconfig/.qconf.o.d
Ok found g++ stupid me ...
Now I get:
scripts/kconfig/qconf.cc: In destructor `virtual ConfigItem::~ConfigItem()':
scripts/kconfig/qconf.cc:291: error: non-lvalue in unary `&'
And that doesn't tell me anything ...
google told me that:
http://groups.google.de/groups?q=/qconf.cc:+In+destructo
Hi,
this is a know bug in unstable for the time being.
http://debianplanet.org/node.php?id=966#comment
On Saturday 14 June 2003 13:44, Mariano Kamp wrote:
> Hi there,
>
> I am running unstable (and the latest xserver from unstable and the nv
> bin module) and haven't res
Hi,
I am using eclipse (http://eclipse.org) to access a cvs repository by
using ext:. The problem is that it asks for the ssh password on the
command line. Anything I can do to pass it in automatically?
The short help of ssh looks like this:
mkamp@hamlet:~$ ssh
Usage: ssh [options] host [com
2 02:36 pm, the fabulous Mariano Kamp wrote:
>
> > I am not too much into ssh. How would it be possible to use an ssh
> > key? I just have control over the client side. The server side is
> > sourceforge.net.
>
> Ah, well I don't know much about sourceforge but thi
o 2.1 M4. Any of this changes or some
change at sourceforge cut me off.
Mariano
On Wed, 2002-12-25 at 21:28, David Goodenough wrote:
> On Wednesday 25 December 2002 17:38, Mariano Kamp wrote:
> > Hi,
> >
> > I am using eclipse (http://eclipse.org) to access a cvs repository by
&
t;
> > >
> > >
> > >
> > > --
> > > To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
> >
> >
> >
> > :wq!
> > ---
> > Robert L. Harris | PGP Key ID: FC96D405
> >
> > DISCLAIMER:
> > These are MY OPINIONS ALONE. I speak for no-one else.
> > FYI:
> > perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
> >
>
--
Mariano Kamp <[EMAIL PROTECTED]>
JLOGIC
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I am not sure how to describe this problem properly. Basically my machine hangs
every now and then. Sometimes it takes 20 minutes, sometimes five and it is also
sometimes running for 60 minutes until it hangs.
Hangs means, I cannot do anything anymore. At least CTRL+ALT+DEL/BS and CTRL+AL
Hi,
I use a Sony VAIO PCG-8A6M, GRX316G and wondering how I can tell if
ACPI is setup and working?
I read that it is possible to burn my laptop if ACPI is not activated.
Is that true?
Mariano
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Cont
Hi,
when using the internal mouse on the am machine it sometimes works,
but most of the time it just moves a bit and when I am at the end of the
touchpad lift my finger and lower it at the begin of the touchpad the
cursor returns to the lower left corner?!
Any idea about that?
Mariano
--
I found out that the machine is still pingable after X hangs.
Mariano
On Mon, 2002-09-02 at 21:28, Mariano Kamp wrote:
> Hi,
>
> I am not sure how to describe this problem properly. Basically my machine hangs
>every now and then. Sometimes it takes 20 minutes, sometimes five an
On Mon, 2002-09-02 at 19:45, Jaye Inabnit ke6sls wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Monday 02 September 2002 12:28 pm, Mariano Kamp wrote:
> > Hi,
> >
> > I am not sure how to describe this problem properly. Basically my machin
Hi,
I installed woody and after booting the machine x hangs the whole
machine (at least numlock doesn't work anymore). Is there anyway to
interrupt the startup procedure to prevent x from starting?
I am also wondering what the reason for that is? Issuing startx by
hand does work.
Does an
Hi,
I tried gtk-demo from gtk2 with woody. Unfortunately I get the message
"Couldn't load font "Sans 10" falling back to "Sans 10" two times and
then "All font failbacks failed!!!" ... Any idea how to solve this?
I've seen some messages about something similar, but it didn't seem to
be relat
Hi,
I still haven't given up yet to compile my own kernel, but I am nearly
there. Meanhwile I removed the kernel and the kernel source packages and
installed them again. But even from the scratch without changing
anything I get a kernel panic from my compiled kernel. Aren't the
default settings
ssages if the kernel panics and halts?
>
> If you need more specific help, provide more specifics on your process
> and StepByStep results.
>
> Mariano Kamp wrote:
> > Hi,
> >
> > I still haven't given up yet to compile my own kernel, but I am nearly
> > th
On Sat, 2002-09-28 at 14:00, Klaus Imgrund wrote:
> On 28 Sep 2002 15:43:48 +0200
> Did you ever try the old fashioned way?
>
> cd /usr/src/linux-x.x.x
> make menuconfig
> make dep && make clean bzImage modules modules_install
> mv /boot/kernelimage /boot/kernelimage.orig
> cp /usr/src/linux-x.x
Which one is "kernelimage"? I found one called bzImage, size ~500K.
should I copy it to /boot/vmlinuz-2.4.18? on my system /vmlinuz points
to /boot/vmlinuz-2.4.18 and /vmlinuz is configured in lilo.conf.
Mariano
On Sat, 2002-09-28 at 16:24, Mariano Kamp wrote:
> On Sat, 2002-0
If the below describe assumption was true then it didn't work out. I
have the same problem.
Mariano
On Sat, 2002-09-28 at 16:33, Mariano Kamp wrote:
> Which one is "kernelimage"? I found one called bzImage, size ~500K.
> should I copy it to /boot/vmlinuz-2.4.18? on my s
ote:
> apt-get kernel-package
> read the readme in /usr/share/docs/kernel-package
> follow the instructions
>
> Mariano Kamp wrote:
> > If the below describe assumption was true then it didn't work out. I
> > have the same problem.
> >
> > Mariano
&g
something up
myself first.
Great! Thank you.
Mariano
ps. I used your aliases..
On Fri, 2002-09-06 at 21:55, Hubert Chan wrote:
> >>>>> "Mariano" == Mariano Kamp <[EMAIL PROTECTED]> writes:
>
> Mariano> Hi, I tried gtk-demo from gtk2 with woody. Unfortun
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I noticed since a couple of releases that the fonts used in gnome are much
more readable (to me) than the ones installed by default with kde.
Any idea, why that is? Can I use the gnome fonts with kde?
Cheers,
Mariano
- --
Get public key fr
Hi,
I am stuck with the woody installer. It doesn't have a current rhine driver
(see next posting). I tried with an alpha version of the new installer, but
it always fails after discovering usb. This also happens with the new
net-installer.
When trying to download the beta from debian.org
Hi,
I bought one of the "cheap" PCs from a german discounter. I am wondering if
anybody has been able to install Debian on it? Any pointers would be nice.
www.linux-hardware.de wasn't helpful.
Allmost all the components are unknown when looking at the /proc/pci
output. This is interest
On Friday 05 December 2003 23:22, Paul E Condon wrote:
> On Fri, Dec 05, 2003 at 11:07:24PM +0100, Mariano Kamp wrote:
> > Hi,
> >
> > I bought one of the "cheap" PCs from a german discounter. I am
> > wondering if anybody has been able to install Debian
On Friday 05 December 2003 23:29, Leandro GuimarÃes Faria Corsetti Dutra
wrote:
> Em Fri, 05 Dec 2003 23:07:24 +0100, Mariano Kamp escreveu:
> > I bought one of the "cheap" PCs from a german discounter. I am wondering
> > if
> > anybody has been able to install D
Hi Kent,
On Saturday 06 December 2003 00:19, Kent West wrote:
> Mariano Kamp wrote:
> > On Friday 05 December 2003 23:29, Leandro GuimarÃes Faria Corsetti Dutra
> >
> > wrote:
> >>Em Fri, 05 Dec 2003 23:07:24 +0100, Mariano Kamp escreveu:
> >>>I b
Hi Richard,
Richard Lyons <[EMAIL PROTECTED]> wrote:
>[··]
>
>My experience with Knoppix was excellent. I used it on two systems
>(laptop and desktop) and both are now mostly unstable - only bit of
>knoppix obviously remaining being the X splashscreen. It certainly
>solved some hardware is
On Saturday 06 December 2003 01:30, Joey Hess wrote:
> lloyd wrote:
> > the links on gluck to the debian-installer beta are broken - where can i
> > get the i386 iso's?
>
> http://www.mmweg.rwth-aachen.de/~sebastian.ley/d-i/
Great... The new installer is just wonderful. It solved my problems mentio
> > Yes, in theory it should work on Debian when it works on Knoppix,
> That is only true to a degree. Klaus Knopper has a lot of very good
> scripts to do hardware detection instead of the usual startup from
> /etc/init.d
> When you do a hd install from Knoppix, you do not get those scripts.
>
On Saturday 06 December 2003 06:30, Karsten M. Self wrote:
> More significantly: get a Knoppix disk. Use it to identify the HW on
> the system. The 'lshw' command is useful, as is my own system-info
> script:
>
> http://twiki.iwethey.org/Main/LinuxSystemInfoScript
>
Meanwhile I got my hands
On Saturday 06 December 2003 14:45, Jonathan Dowland wrote:
> On Fri, Dec 05, 2003 at 11:07:24PM +0100, Mariano Kamp wrote:
> > I bought one of the "cheap" PCs from a german discounter. I am
> > wondering if anybody has been able to install Debian on it? Any p
Hi,
I am trying to compile 2.6.0-test9 on i386/debian/unstable.
When running:
make-kpkg --revision=medion3g --config=menuconfig clean kernel_image
That's what I get:
[..] (copied by hand)
install -p -o root -g root -m 644 conf.vars debian/tmp-image/usr/share/doc/
kernel-image-2.6
On Saturday 06 December 2003 23:10, Markku Kellberg wrote:
> lör 2003-12-06 klockan 18.25 skrev Mariano Kamp:
> > [..] (copied by hand)
> > install -p -o root -g root -m 644 conf.vars
> > debian/tmp-image/usr/share/doc/ kernel-image-2.6.0-test9/conf.vars
> > install:
On Sunday 07 December 2003 02:46, king kong wrote:
[ .. ]
> Oh, and don't get me go into the installer. It just
> plain
> sucks (Yeah, shoot me, I said it!). For god sake, we
> are almost passed half of the first decaded of the 21
> century, and we still can't have a good installer that
> recognize
On Saturday 06 December 2003 13:18, Mihai P. B. Stiucan wrote:
> There would be an ideea to install it from scratch , but I'm not so
> experimented to keep track of the files by myself.
>
> I will be very happy if I will succed to do a debian based system with
> XFree86 4.0.1 at least, and KDE 3.1
On Sunday 07 December 2003 08:35, Markku Kellberg wrote:
> lör 2003-12-06 klockan 23.47 skrev Mariano Kamp:
> > On Saturday 06 December 2003 23:10, Markku Kellberg wrote:
> > > lör 2003-12-06 klockan 18.25 skrev Mariano Kamp:
> > > > [..] (copied by hand)
> &g
On Sunday 07 December 2003 12:07, Mariano Kamp wrote:
> On Sunday 07 December 2003 08:35, Markku Kellberg wrote:
> > lör 2003-12-06 klockan 23.47 skrev Mariano Kamp:
> > > On Saturday 06 December 2003 23:10, Markku Kellberg wrote:
> > > > lör 2003-12-06 kl
On Sunday 07 December 2003 16:28, Mariano Kamp wrote:
> On Sunday 07 December 2003 12:07, Mariano Kamp wrote:
> > On Sunday 07 December 2003 08:35, Markku Kellberg wrote:
> > > lör 2003-12-06 klockan 23.47 skrev Mariano Kamp:
> > > > On Saturday 06 December 200
Hi,
I just installed 2.6 and to my surprise it came up nicely on first try. When
trying to install modules though, modconf didn't show any? Is there another
tool to be used.
I've also seen this bug:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=192232
Would that mean that there is no
Hi,
I have an ATI Radeon 9800 XL card and want to use it with debian/unstable
Kernel 2.6.
From what my googling turned up so far I would need XFree 4.3?
In unstable I "only" found XFree 4.1. On apt-get.org I found XFree 4.3 for
woody. Would I be able to use it? Any other place I can go
Roberto Sanchez <[EMAIL PROTECTED]> wrote:
__
>I know this has been discussed to death already. But what is holding up
>XFree86 4.3 from making it into unstable? I have been using 4.3 from
>experimental for a few months, but 4.3 was released almost a year ago
>and 4.4 will probably be ou
On Sunday 07 December 2003 21:11, Roberto Sanchez wrote:
> Mariano Kamp wrote:
> > Hi,
> >
> > I have an ATI Radeon 9800 XL card and want to use it with
> > debian/unstable Kernel 2.6.
> >
> > From what my googling turned up so far I would need XFree 4.
Hi,
I recently bought an Apple pb and now I realize with horror that d-u
is not the right place for my questions anymore ;-) At least not for the
pb related ones.
Anyway, any good suggestion for a good list on OS X related stuff?
Cheers,
Mariano
--
To UNSUBSCRIBE, email to [EMAIL PROTECT
Hi,
I am running an instance of cyrus for myself. Problem is, I can
create and remove folders below INBOX, but I am not able to remove
folders I've created on the same level as INBOX.
Any idea?
Is there any admin gui?
I stumbled over this problem as the IMAP support for folders with
Hi Henrique,
thanks for taking the time.
On Saturday, Dec 27, 2003, at 11:45 Europe/Berlin, Henrique de Moraes
Holschuh wrote:
On Sat, 27 Dec 2003, Mariano Kamp wrote:
create and remove folders below INBOX, but I am not able to remove
folders I've created on the same level as INBOX.
Di
Hi,
since a couple of weeks I have the above described problem. My monitor shows
that I run with 1024x768. The funny thing is that this resolution is nowhere
to be found in my XF86Config-4 (see attached file).
I assumed that this was part of the problem with the gcc bug, but meanwhile
I
dist-upgrade.
I also applied the tip regarding the mouse.
Once again, thx,
Mariano
On Monday 07 July 2003 11:18, Florian Ernst wrote:
> Hello Mariano!
>
> Mariano Kamp wrote:
> > since a couple of weeks I have the above described problem. My
> > monitor shows
> &g
89 matches
Mail list logo
