On Fri 13 Aug 2021 at 06:29:52 -0400, Polyna-Maude Racicot-Summerside wrote:
> Hi,
>
> On 2021-08-13 6:12 a.m., Brian wrote:
> > On Thu 12 Aug 2021 at 18:56:58 -0400, Polyna-Maude Racicot-Summerside wrote:
> >
> >> Hi,
> >>
> >> On 2021-08-12 6:2
ugin -g
>
> It installs files in /usr/share/hplip/scan/plugins/.
>
> After that:
>
> scanimage -h -d 'hpaio:/net/DeskJet_2700_series?ip=10.0.1.17'
>
> worked, as did actual scanning and Gimp's GUI.
>
> I am not very satisfied with the use of a binary plugin, but at least it
> works.
Did I not recommend sane-airscan earlier in this thread? If not
apt install sane-airscan
Non-free plugins dispensed with at a stroke. Uninstall HPLIP while
you are at it. It is completely unneeded.
--
Brian.
On Fri 13 Aug 2021 at 15:26:03 +0200, Nicolas George wrote:
> Brian (12021-08-13):
> > Did you read the Release Notes for Bullseye? (No advice on cat controls,
> > though :) ).
>
> Enough to upgrade, but I do not know what it has to do with connecting a
> printer to an O
ssive, but it does not matter.
In Debian 11 we have freed ourselves from reliance on non-free vendor
drivers and plugins for printing and scanning. Nicolas George has
demonstrated that with the installation of his new printer.
--
Brian.
Wasting bits and bandwidth since 1994.
(Signature inspired by a grateful user's comment).
On Thu 27 Jan 2022 at 08:21:49 +, Tixy wrote:
> On Wed, 2022-01-26 at 19:26 +0000, Brian wrote:
> > On Wed 26 Jan 2022 at 10:42:38 -0600, David Wright wrote:
> >
> > [Snipping]
> >
> > > I've worked this way for 15 years and, unlike Gene, I'm
be a compiled native
> executable file).
Technically correct, but Curt's response was good enough for Richard
Owlett to make progress. Richard Owlett is very unlikely to be using
a 64-bit kernel with 32-bit userspace.
--
Brian.
day activities,
such as the reading of electronic mail, because even a small mistake can
result in disaster. You should create a normal user account to use for
those day-to-day tasks.
The OP's requirements are very nurky. Whatever he wants can be done from
the installer.
--
Brian.
n.org/debian-devel/2022/01/msg00172.html
https://engineering.fb.com/2020/03/18/production-engineering/ntp-service/
--
Brian.
t on my system).
>
> Instead, the ntp and systemd-timesyncd *packages* now appear to have
>
> Provides: time-daemon
>
> which might make them mutually exclusive.
It does. Installation of chrony or ntp removeds the traditional
systemd-timesyncd package.
--
Brian.
dd. I mean a full, upgradable,
> installation.
> If so, can anybody point me at a how-2 or othe dox.
Start the installer. Plug the pendrive/hard disk in. Partition the
device. Install.
--
Brian.~
rally prefer)?
> >
> > I admit Brave is often a bit touchy about accessing pages where it suspects
> > security threats.
>
> This is Firefox's captive portal [1] detection [2].
>
> Cheers
>
> [1] Had I a say in it, I'd reserve a very special place in Hell
>for those.
Could the process to replace them on, say, public transport be outlined?
--
Brian.
On Sun 13 Feb 2022 at 16:02:53 +0100, to...@tuxteam.de wrote:
> On Sun, Feb 13, 2022 at 02:41:31PM +0100, Linux-Fan wrote:
> > Brian writes:
> >
> > > On Sat 12 Feb 2022 at 21:07:10 +0100, to...@tuxteam.de wrote:
> >
> > [...]
> >
> > >
On Mon 14 Feb 2022 at 06:28:26 +0100, to...@tuxteam.de wrote:
> On Sun, Feb 13, 2022 at 08:47:54PM +0000, Brian wrote:
>
> [...]
>
> > Interesting.
> >
> > Captive portals provide free connectivity. What's the problem?
>
> No. They provide captive conn
> > > openssl-dev
>
> [...]
>
> > This is part of the reason why you keep having problems, I suspect.
>
> OTOH... everyone of us "keeps having problems". Ain't that an adequate
> description of "life"?
>
> :-)
Indeed. But most users do not make a somg and a dance out of their
problems with Debian. :)
--
Brian.
e technical situation is that you have buggered up something. Go back
to GO. Do not collect 200 GBP :).
--
Brian.
ortunately,
the present political and economic situation obliges us to charge
1,000 GBP for a cup of coffe.
This package includes a free copy of Debian 11.
Brian.
ipp._tcp
avahi-browse -rt _uscan._tcp
driverless
4. avahi-browse is in the avahi-utils package.
--
Brian.
pport AirPrint (https://support.apple.com/en-us/HT201311), so
> driverless printing (actually a universal driver) should work.
>
> This wiki page has some instructions:
> https://wiki.debian.org/CUPSDriverlessPrinting . It's a bit confusing,
> though.
Please pinpoint the source(s) of confusion.
--
Brian.
On Thu 24 Feb 2022 at 14:39:55 -0500, gene heskett wrote:
> On Thursday, February 24, 2022 1:08:26 PM EST Brian wrote:
> > On Wed 23 Feb 2022 at 18:44:37 -0500, gene heskett wrote:
> >
> > [...[
> >
> > > With all the crash and burn sessions I've had wi
e such as
> /etc/network/interfaces.d/wlan0 on newer Debian versions): "
>
> What should I put in the file called wlan0? Said wiki does not provide
> examples.
You do not want just anyone to read /etc/network/interfaces?
chmod 600 /etc/network/interfaces
--
Brian.
On Mon 28 Feb 2022 at 21:17:25 +0100, Stella Ashburne wrote:
> Dearie,
>
> > Sent: Tuesday, March 01, 2022 at 4:08 AM
> > From: "Brian"
> > To: debian-user@lists.debian.org
> > Subject: Re: What should I put inside the file called wlan0?
> >
&g
e is always in a safe environment?
> In typical domestic settings, the wifi password is on a post-it near the
> access point, safe from neighbors but convenient for guests.
My guests' eyes glaze over when they are given a 63 character random
passphrase to type in :). Then they put me to the trouble of mailing
to them.
--
Brian.
rk when the code is onscreen and/or printed on
paper?
--
Brian.
> to your computer, she typically has more valuable things to look
> for.
/e/n/i may contain PSKs for networks other than the home network;
friens, relatives, work etc. A user, having been trusted with them,
may see it as an obligation not to make *them* easily accessible.
--
Brian.
On Tue 01 Mar 2022 at 15:25:52 +0100, Stella Ashburne wrote:
> Dearie
>
> > Sent: Tuesday, March 01, 2022 at 8:13 PM
> > From: "Brian"
> > To: debian-user@lists.debian.org
> > Subject: Re: What should I put inside the file called wlan0?
> >
>
> # The loopback network interface
> auto lo
> iface lo inet loopback
>
> # The primary network interface
> #allow-hotplug enp2s0
> #iface enp6s0 inet static
> # address 192.168.1.77/24
> # gateway 192.168.1.1
> # dns-* options are implemented by the resolvconf package, if installed
> # dns-nameservers 1.1.1.1 8.8.8.
(Nothing to do with your question but these two lines are superfluous:
auto lo
iface lo inet loopback).
--
Brian.
when no device is plugged in or an incorrect device is found.
I haven't any idea how this fits in with having udisks on the system or
remounting a disk rw, or even how it fits your objectives.
--
Brian.
I put inside the file called wlan0?
> >
> > If you only have one interface then it probably doesn't make much
> > difference whether you leave it in interfaces or move it to
> > interfaces.d/
> >
> Thank for your clarification.
So, having been given extensive advice in this thread - what is your
plan of action?
--
Brian.
On Thu 03 Mar 2022 at 19:38:07 +0100, Stella Ashburne wrote:
[Snip]
> Did you mean to tell me that the following lines can be omitted from both
> /etc/network/interfaces AND /etc/network/interfaces.d/brian ?
>
> # The loopback network interface
> auto lo
> iface lo inet loo
On Thu 03 Mar 2022 at 19:51:02 +0100, Stella Ashburne wrote:
> Mon cheri
>
> > Sent: Friday, March 04, 2022 at 2:43 AM
> > From: "Brian"
> > To: debian-user@lists.debian.org
> > Subject: Re: What should I put inside the file called wlan0?
> >
. And I have not found how to turn off line wrap in kmail in
> kde5. It was in the composer tool bar in the old tde version.
Don't worry too much. It is not a CUPS issue.
--
Brian.
On Fri 04 Mar 2022 at 21:20:29 +0100, to...@tuxteam.de wrote:
> On Fri, Mar 04, 2022 at 11:39:36AM -0800, Charlie Gibbs wrote:
>
> [...]
>
> > Yours for a Google-free world...
>
> +1
Please don't be silly :).
--
Brain.
ss" is on for your account
> Because less secure apps can make your account more
> vulnerable, Google will automatically turn this setting
> off **if it’s not being used**.
The empasis is mine.
There isn't any indication that the setting is beimg removed. Panic
over?
--
Brian.
On Sun 06 Mar 2022 at 11:54:28 +1300, Ash Joubert wrote:
> On 06/03/2022 02:26, Brian wrote:
> > On Fri 04 Mar 2022 at 10:59:45 -0500, Marc Auslander wrote:
> > > Google has now said they are pulling the plug on userid/password
> > > authentication for apps.
> >
ople doing their jobs.
I came across Disroot (disroot.org) the other day. Looks interesting
and worth considering.
> We do not wish for Disroot to become one centralized entity but
> rather a part of a larger community - one node out of many. We
> hope others will be inspired to create more projects with similar
> intentions.
--
Brian.
mselves to investigate the conssequences *prior* to committing to
the action. Involving a communuty in the aftermath is little short
of thoughtlessness and lack of preparation.
What is demonstrated is not a "dependency bug" but an unwillingness
to learn from the past and plan for the future.
--
Brian.
2. apt-get --no-install-recommends install mate-desktop-environment
You have a DVD with that on?
> 3. apt-get install xinit
> 4. apt-get --no-install-recommends install xorg gparted synaptic pluma
xinit, xorg, gparted and synaptic are on DVD-1.
--
Brian.
On Tue 08 Mar 2022 at 15:11:28 -0600, Richard Owlett wrote:
> On 03/08/2022 12:49 PM, Brian wrote:
> > On Tue 08 Mar 2022 at 07:11:51 -0600, Richard Owlett wrote:
> >
> > > As I have a very low data cap and wish to avoid some "recommended"
> > > com
motely.
The short answer is that you use the network-console udeb. To do that,
I preseed wirh
d-i anna/choose_modules string network-console
I boot with a netinst using hd-media and pressed from a file.
--
Brian.
On Wed 09 Mar 2022 at 17:08:21 +0100, Christian Britz wrote:
>
>
> On 2022-03-09 16:53 UTC+0100, Christian Britz wrote:
> >
> >
> > On 2022-03-09 16:50 UTC+0100, Brian wrote:
> >> The short answer is that you use the network-console udeb. To do that,
>
t; and "reader". Testing the
offerings striles me as fun.
"feature complete"? Judge for yourself.
--
Brian.
On Sat 12 Mar 2022 at 22:41:14 +0100, Steve Keller wrote:
> On Debian stretch I have installed the cvs2cl package. In buster
> and bullseye it seems to be missing. Very sad :(
Imdeed. It is very sad that
https://tracker.debian.org/pkg/cvs2cl
is not available to you.
--
Brian.
On Sun 13 Mar 2022 at 20:05:45 -0500, David Wright wrote:
> On Wed 09 Mar 2022 at 16:18:08 (+), Brian wrote:
> >
> > Sorry, I do not know anything about UEFI and the installer. I will,
> > however, guide you through the steps to use preseeding and get a
> > netwo
bit of fun.
--
Brian.
iwd provides pretty much a superset of the
> functionality of wpa-supplicant (more specifically the extra feature is
> DHCP client).
Specifically, I do not know. The executables are 3,272,960 and
448,364 (iwd).
--
Brian.
9…abdcef0123456789…abdcef0123456789
> Passphrase=yoursecretpassphrase
> #
However, brian (who is not in the netdev group) can do
iwctl known-networks YourSSID forget
and /var/lib/iwd/YourSSID.psk is deleted.
This user can also successfully execute
iwctl station wlan0 connect YourSSID
to
On Thu 17 Mar 2022 at 23:39:39 -0500, David Wright wrote:
> On Thu 17 Mar 2022 at 14:50:06 (+), Brian wrote:
> > On Sun 13 Mar 2022 at 20:04:06 -0500, David Wright wrote:
> >
> > [...]
> >
> > > By the end of all this, the link should be working, and a
On Thu 17 Mar 2022 at 23:40:28 -0500, David Wright wrote:
> On Wed 16 Mar 2022 at 22:40:07 (+), Brian wrote:
[...]
> > OTOH, the Debian iwd package
> > does not provide any integration with ifupdown
>
> Does iwd need ifupdown at all? It seems to be able to configure t
command line. My choice is ignored by iwd. Why does
it not want an interface to be renamed by systemd/udev?
--
Brian.
On Fri 18 Mar 2022 at 20:57:38 +, Brian wrote:
> On Sun 13 Mar 2022 at 20:04:06 -0500, David Wright wrote:
>
> [...]
>
> > Install iwd, and resolvconf if necessary. You may then need to reboot
> > if the wifi interface has already been renamed by the kernel, ie if
&
On Sat 19 Mar 2022 at 10:15:45 -0500, David Wright wrote:
> On Fri 18 Mar 2022 at 20:57:38 (+), Brian wrote:
> > On Sun 13 Mar 2022 at 20:04:06 -0500, David Wright wrote:
> >
> > [...]
> >
> > > Install iwd, and resolvconf if necessary. You may t
On Sat 19 Mar 2022 at 10:12:54 -0500, Nicholas Geovanis wrote:
> On Sat, Mar 19, 2022 at 7:33 AM Brian wrote:
>
> > On Fri 18 Mar 2022 at 20:57:38 +, Brian wrote:
> >
> > > On Sun 13 Mar 2022 at 20:04:06 -0500, David Wright wrote:
> > >
> > > [.
7:36:04 -0700 (PDT)
Not bad going, if you ask me.
--
Brian.
On Tue 22 Mar 2022 at 23:06:08 -0500, David Wright wrote:
> On Sat 19 Mar 2022 at 10:18:49 (+1100), Charlie wrote:
> > On Fri, 18 Mar 2022 14:32:40 +0000 Brian wrote:
> >
> > > Regarding the installer: at present it provides an /e/n/i with wpa-*
> > > lines. Cha
used by Powerline devices (ethernet through the mains power).)
wicd-cli and wicd-curses are in experimental. A quick test here
indicates either should install on bullseye.
--
Brian.
ion? A minute? An hour?
We are not a dumping ground for random questions about software
that is not in Debian. Or is it? If it is, tell us about it.
--
Brian.
noted that there has
never been a well-documneted case of dd, cat or cp failing. I doubt
the OP will provide substantial reproducible evidence, whatever
"worked" meant.
--
Brian.
assign a name to each interface based on
>its MAC address, or some other identifying characteristic.
That's good advice, but are MAC addresses memorable?
--
Brian.
On Wed 30 Mar 2022 at 14:39:33 -0400, Greg Wooledge wrote:
> On Wed, Mar 30, 2022 at 07:18:07PM +0100, Brian wrote:
> > On Wed 30 Mar 2022 at 13:32:53 -0400, Greg Wooledge wrote:
> > > Yes. You've now seen direct evidence of the lie. I guess I won't need
> > &g
On Wed 30 Mar 2022 at 21:50:53 +0200, to...@tuxteam.de wrote:
> On Wed, Mar 30, 2022 at 07:18:07PM +0100, Brian wrote:
> > On Wed 30 Mar 2022 at 13:32:53 -0400, Greg Wooledge wrote:
> >
> > > On Wed, Mar 30, 2022 at 05:35:12PM +0200, basti wrote:
> > > >
On Thu 31 Mar 2022 at 07:28:47 +0200, to...@tuxteam.de wrote:
[...]]
> Since then, I learnt that I like to relax call my interfaces
> "eth0" and "wlan0".
>
> Can we still be friends?
Of course! After all, we are both playing in the same game.
--
Brian.
r
> case letters and one or more numerals. Some sites require 'special'
> characters (%#~$, etc) to be used, some limit their use.
Indeed, all of this happens, usually without any explanation whatsoever.
For whose benefit are such requirements constructured?
--
Brian.
On Sun 03 Apr 2022 at 19:45:47 +, Andrew M.A. Cater wrote:
> On Sun, Apr 03, 2022 at 08:25:46PM +0100, Brian wrote:
> > On Sun 03 Apr 2022 at 20:10:14 +0100, Brad Rogers wrote:
> >
> > > On Sun, 3 Apr 2022 21:31:34 +0300
> > > PanosGR wrote:
> > >
rplexing and outside my experience.
--
Brian.
file. I do not know why the OP
thinks it has some importance in Debian's standard X framework. I do not
think any DEbian documentation places any emphasis on it. The only files
of importance to the framework are ~/.xsession and ~/.xsessionrc.
--
Brian.
On Tue 05 Apr 2022 at 14:00:03 -0400, Greg Wooledge wrote:
> On Tue, Apr 05, 2022 at 06:39:45PM +0100, Brian wrote:
> > On Tue 05 Apr 2022 at 12:51:03 -0400, Greg Wooledge wrote:
> >
> > > On Tue, Apr 05, 2022 at 12:17:14PM -0400, Noah Sombrero wrote:
> > > >
are living in cloud-cuckoo land. Debian X does not use ~/.xprofile.
Got it?
The Debian X setup has not changed significantly in the past twenty
years. Fit that into your world view!
--
Brian.
On Tue 05 Apr 2022 at 15:43:02 -0400, Noah Sombrero wrote:
> On Tue, 05 Apr 2022 21:20:01 +0200, Brian
> wrote:
>
> >On Tue 05 Apr 2022 at 14:23:48 -0400, Noah Sombrero wrote:
> >
> >> On Tue, 05 Apr 2022 20:10:01 +0200, Greg Wooledge
> >> wrote:
>
ou got it!
Now contact you highly paid sys admins to ask them to add a "Location"
field to whatever the server/printer is advertising.
--
Brian.
>
On Fri 08 Apr 2022 at 17:59:10 +0100, Tixy wrote:
> On Fri, 2022-04-08 at 12:10 -0400, Greg Wooledge wrote:
> > Unfortunately, I was not able to find ANY way to determine the IP
> > addresses of the autodetected printers that were presented to me.
>
> If I go to http://localhost:631/printers/ and
general search:
> # avahi-browse -avr
> and explore the results
avahi-browse -rt _ipp._tcp
is better.
This also gives the location of a printer if a highly paid sys admin
can be arsed to supply it.
--
Brian.
On Fri 08 Apr 2022 at 15:22:58 -0400, Greg Wooledge wrote:
> On Fri, Apr 08, 2022 at 08:08:22PM +0100, Brian wrote:
> > On Fri 08 Apr 2022 at 12:10:37 -0400, Greg Wooledge wrote:
> > > How is one *supposed* to figure out which autodetected printer is the
> > > correc
On Fri 08 Apr 2022 at 16:20:54 -0400, The Wanderer wrote:
> On 2022-04-08 at 15:52, Brian wrote:
>
> > On Fri 08 Apr 2022 at 15:22:58 -0400, Greg Wooledge wrote:
> >
> >> On Fri, Apr 08, 2022 at 08:08:22PM +0100, Brian wrote:
>
> >>> Now contact you h
On Fri 08 Apr 2022 at 21:07:18 +0100, Tixy wrote:
> On Fri, 2022-04-08 at 20:18 +0100, Brian wrote:
> > On Fri 08 Apr 2022 at 17:59:10 +0100, Tixy wrote:
> >
> > > On Fri, 2022-04-08 at 12:10 -0400, Greg Wooledge wrote:
> > > > Unfortunately, I was not able
On Sat 09 Apr 2022 at 08:33:31 +0200, to...@tuxteam.de wrote:
> On Fri, Apr 08, 2022 at 08:52:26PM +0100, Brian wrote:
>
> [...]
>
> > You didn't like my bus analogy, did you?
>
> I did like it. Nevertheless, I thought something's missing:
In general, an
On Fri 08 Apr 2022 at 19:45:41 -0400, The Wanderer wrote:
> (This is probably both overly long and overly repetitive, among possibly
> other undesirable things, but I'm running short on time.)
So I hope you do not mind if I do not reply to every point you make.
> On 2022-04-08 a
On Fri 08 Apr 2022 at 19:57:53 -0500, David Wright wrote:
> On Fri 08 Apr 2022 at 23:44:29 (+0100), Brian wrote:
> > On Fri 08 Apr 2022 at 16:20:54 -0400, The Wanderer wrote:
>
> > > What I understood Greg as asking about is how to get CUPS to *tell* you
> > > what
m.
This leaves two Canons and three HPs. What make is the printer in the
room? Canon? Still don't want to guess? Then
avahi-browse -rt _ipp._tcp | grep -B 2 "10.76.172.100"
Another 10/10 fot the printing system and the tools it uses.
Of course, knowing the queue name in advance would be more desirable and
lead to less frustration.
--
Brian.
ocate package. Or, you can edit
> /etc/cron.daily/mlocate and comment out the cron entry. That would
> leave the package installed, but you would need to keep the database
> updated manually.
Or replace mlocate with plocate, which is reckoned to be better than
mlocate.
--
Brian.
On Sat 09 Apr 2022 at 18:18:31 +0100, Brad Rogers wrote:
> On Sat, 9 Apr 2022 17:50:03 +0100
> Brian wrote:
>
> Hello Brian,
>
> >Or replace mlocate with plocate, which is reckoned to be better than
>
> mlocate is a transitional package in Debian. It installs plo
On Sat 09 Apr 2022 at 20:21:12 -0400, The Wanderer wrote:
> On 2022-04-09 at 07:56, Brian wrote:
>
> > On Fri 08 Apr 2022 at 19:45:41 -0400, The Wanderer wrote:
> >
> >> (This is probably both overly long and overly repetitive, among
> >> possibly other undes
e on port 9100. Check with
nmap 10.76.172.100
It would be unusual for the service not to be offered because it
dates from the dawn of time and is very simple to implement. There
isn't any reliance on avahi-daemon (just TCP/IP) and it works with
non-ipp printers.
Execute
/usr/lib/cups/backend/snmp
The output should include an IP address and a printer make and model.
Thanks to The Wanderer for sparking this thought.
--
Brian.
tising.
So, I do not understand "...has nothing to do with...".
--
Brian.
th it.
>
> Tomas just found, and I have now edited /etc/default/avahi-daemon to
> officialy shut it off, ditto for brytty, leaving a killed orca spewing 20
I do not think AVAHI_DAEMON_DETECT_LOCAL does what you think it does.
It applies to detection of *unicast* dns servers.
--
Brian.
On Sun 10 Apr 2022 at 09:19:43 -0400, gene heskett wrote:
> On Sunday, 10 April 2022 08:40:29 EDT Brian wrote:
> > /usr/lib/cups/backend/snmp
> The only machine I have here that has that file installed, an rpi4, does
> not expose the printers address, only:
> pi@rpi4:~ $ s
On Sun 10 Apr 2022 at 10:05:09 -0400, The Wanderer wrote:
> On 2022-04-10 at 09:54, Brian wrote:
>
> > The snmp backend is not installed in the location I gave but has
> > to be moved there. Do either
> >
> > mv /usr/lib/cups/backend-available/snmp /usr/lib
On Sun 10 Apr 2022 at 09:31:59 -0400, gene heskett wrote:
> On Sunday, 10 April 2022 08:54:07 EDT Brian wrote:
> > On Sun 10 Apr 2022 at 05:46:35 -0400, gene heskett wrote:
> >
> > [...]
> >
> > > This, FWIW, has nothing to do with cups and printer sh
On Sun 10 Apr 2022 at 15:40:28 +0200, to...@tuxteam.de wrote:
> On Sun, Apr 10, 2022 at 01:40:29PM +0100, Brian wrote:
>
> [...]
>
> > Many printers provide an snmp (Simple Network Management Protocol)
> > service on port 9100. Check with
> >
> > nmap 1
On Sun 10 Apr 2022 at 08:52:09 -0400, The Wanderer wrote:
> On 2022-04-10 at 08:38, Brian wrote:
[...]
> > The CUPS web interface is not designed to show the IP address but to
> > display the URI.
>
> This, I think, is exactly the detail that's being complained
On Sun 10 Apr 2022 at 20:39:15 +0200, to...@tuxteam.de wrote:
> On Sun, Apr 10, 2022 at 06:47:36PM +0100, Brian wrote:
> > On Sun 10 Apr 2022 at 15:40:28 +0200, to...@tuxteam.de wrote:
> >
> > > On Sun, Apr 10, 2022 at 01:40:29PM +0100, Brian wrote:
> > >
On Sun 10 Apr 2022 at 21:29:30 +0200, to...@tuxteam.de wrote:
> On Sun, Apr 10, 2022 at 08:19:52PM +0100, Brian wrote:
>
> [...]
>
> > > forbidden of trying to do network scans, but the sysadmin wants to
> > > know. I can't blame him (I'm on speaking t
y to convey to you that
> my workplace's network DOES NOT work like what you see on yours.
>
> Looking at the stuff that I pasted here, how am I supposed to know whether
> this corresponds to the physical printer with IP address 10.76.172.100?
A third way forward:
"implicitclass://Canon_LBP351dn_f9_7a_4a_/" is the URI for this printer.
Canon_LBP351dn_f9_7a_4a_ is the printer's Service Name.
avahi-resolve -n Canon_LBP351dn_f9_7a_4a_.local
should give the IP address of the host.
--
Brian.
On Mon 11 Apr 2022 at 11:53:38 -0400, Greg Wooledge wrote:
> On Mon, Apr 11, 2022 at 03:40:12PM +0100, Brian wrote:
> > A third way forward:
> >
> > "implicitclass://Canon_LBP351dn_f9_7a_4a_/" is the URI for this printer.
> > Canon_LBP351dn_f9
On Mon 11 Apr 2022 at 13:04:12 -0400, Greg Wooledge wrote:
> On Mon, Apr 11, 2022 at 05:47:07PM +0100, Brian wrote:
> > What does
> >
> >avahi-browse -rt _ipp._tcp | grep -B3 port
> >
> > give for this device?
>
> = eno1 IPv4 Canon LBP351dn (f9:7a:4
On Mon 11 Apr 2022 at 13:55:03 -0400, Greg Wooledge wrote:
> On Mon, Apr 11, 2022 at 06:47:59PM +0100, Brian wrote:
> > BTW. I am interested in how using /usr/lib/cups/backend/snmp went.
> > Its drawback is that not all printers provide an snmp service.
>
> wooledg:~$ /usr/
On Sat 16 Apr 2022 at 08:50:22 -0500, Richard Owlett wrote:
> A goal of the Debian installer is to create a system that can be used by
> *ALL* people to use for *ANY* possible purpose.
This is your gloss. The goal of d-i is to install Debian. That is its
only goal.
> I find the resulting system
to do the process
> in the paragraph above. 'Bout time I brushed up on batch file prep ;}
I take it you want to replace (on /dev/sda5) with something like
(on LABEL). How about this?
e2label will enable matching /dev/sda5 and other devices
with a LABEL. Then a script to seach and replace (on /dev/sdaN)
with the corresponding LABEL.
The script could be run from update-grub and update-grub diverted.
This looks like automatic to me.
--
Brian.
nder.
What do have in /etc/mailname?
--
Brian.
t and work well: it will almost
> certainly be required if you are installing over a WiFi connection.
I am aware that this ISO has non-free packages for a wireless
connection and that any needed will be used and installed by
d-i. However, what about micorode packages, firmware-intel-sound,
bluez-firmwarem and dahdi-firmware? At which stage(s) of an
installation does d-i become aware of them?
--
Brian.
On Mon 25 Apr 2022 at 17:24:29 +, Andrew M.A. Cater wrote:
> On Mon, Apr 25, 2022 at 06:15:40PM +0100, Brian wrote:
> > On Mon 25 Apr 2022 at 16:59:57 +, Andrew M.A. Cater wrote:
> >
>
401 - 500 of 10006 matches
Mail list logo
