Hello
I create encrypted backups on blu-ray discs for some years now with a bash
script, but now I encountered a problem mounting some of these discs (but not
all of them - in fact, my last backups consist of two discs each, and I cannot
mount the first one but I can mount the second one for each
On Montag, 4. Juli 2022 19:51:57 CEST Thomas Schmitt wrote:
> Hi,
>
> B.M. wrote that dmesg reports:
> > UDF-fs: warning (device dm-10): udf_load_vrs: No VRS found
>
> That's a very early stage of UDF recognition.
> Given that you were able to copy files into that UDF
> > file "$IMGFILE"
> > LUKS encrypted file, ver 2 [, , sha256] UUID:
> > 835847ff-2cb3-4c6d-aa04-d3b79010a2d3
> So it did not stay unencrypted by mistake.
> (I assume this is one of the unreadable images.)
It looks like this for both, the readable and the unreadable discs.
> > mount -t udf -o no
> > > A UDF filesystem image is supposed to bear at its start 32 KiB of zeros.
>
> B.M. wrote:
> > This is indeed the case:
> > [...]
> > For a readable disk, this look like you said: Only zeros.
>
> So it looks like at least a part of the problem is decrypti
> No
> cryptsetup luksClose /dev/mapper/BDbackup
> between remove and burn ?
To be honest, I cannot say for sure, so maybe yes. But: what would be the
implication? The fs inside is already unmounted, is cryptsetup luksClose
modifying anything within the image?
> Andy Polyakov decided to format
> Good questions. Make some experiments. :))
> At least the manual intervention is a good suspect because it occurs exactly
> when you get undecryptable images.
Will do later.
> I see in your script:
>
> umount /mnt/BDbackup
> cryptsetup luksClose /dev/mapper/BDbackup
> losetup -d $IM
een done.
Best,
Bernd
On Montag, 11. Juli 2022 10:10:51 CEST you wrote:
> Hi,
>
> B.M. wrote:
> > Do I understand correctly, you say that this Pioneer drive doesn't work
> > well with Verbatim BD-RE, i.e. their rewriteable BDs.
>
> Yes. The problem is with the hig
Hi
I'm encountering a somehow strange problem:
A user logs into another computer via xrdp, starting either KDE Plasma or
GNOME3. Then she wants to connect to a vpn (openvpn) by clicking on Tray Icon
-> Networks -> -> Connect (in case of KDE) or -> VPN Off
-> Connect (in case of Gnome).
If it's
nmcli con up doesn't work either: nothing happens except the three
dots where the VPN icon is shown and after 90 seconds a timeout message
appears in the terminal window; so exactly the same behaviour :-(
Bernd
On Monday, August 8, 2022 3:03:17 PM CEST Harald Dunkel wrote:
> Hi BM
>
> if your V
assword in the VPN config file at /etc/
NetworkManager/system-connections/..., followed by a
service network-manager restart
but it didn't work:
...
[vpn]
...
password-flags=0
...
[vpn-secrets]
password=PASSWORD
Any ideas?
Thank you.
Best,
Bernd
On Tuesday, August 9, 2022 11:09:44 AM
Hi,
I'm going to buy a Dell Precision 3570 laptop in the next couple of weeks.
Since it's a Build Your Own device, I can order it with Ubuntu 20.04 LTS pre-
installed instead of paying for an never used Win 11 :-)
Since all our other computers are happily running Debian, I'd like to replace
this
ll computers without any
OS installed (at least here in Switzerland)...)
Have a nice day,
Bernd
PS: Please add me CC since I'm currently not subscribed to this list.
Thanks.
On Mon, 2022-11-28 at 10:04 +0100, B.M. wrote:
> Hi,
>
> I'm going to buy a Dell Precision 3570 laptop in the
On Fri, 2022-12-16 at 18:12 +0100, B.M. wrote:
> Hi,
>
> The new laptop just arrived and I had a first look what the people
> did
> at Dell or Canonical:
>
> After switching it on the first time, I was asked to enter
> / configure
> WLAN, username, password, hostname,
Hi,
I've got a brand new Dell Precision 3570 Laptop with Ubuntu 20.04 LTS pre-
installed. After figuring out recovery partition and tools, I installed Debian
Testing (Bookworm) side-by-side (since using a live medium doesn't really work
because it's based on Stable which isn't supporting the keybo
Dear all,
Comparing power consumption with powertop for a brand new Dell laptop I found
out that Debian is consuming about 6 Watts while Ubuntu is consuming 3 Watts
(idle). Comparing configs I just found out that lspci -vv reports ASPM enabled
6 x for Ubuntu and 4 x for Debian. The differences are
On Mittwoch, 21. Dezember 2022 18:37:20 CET you wrote:
> Dear all,
>
> Comparing power consumption with powertop for a brand new Dell laptop I
> found out that Debian is consuming about 6 Watts while Ubuntu is consuming
> 3 Watts (idle). Comparing configs I just found out that lspci -vv reports
> A
Dear all,
I have a problem with a program that once works well and once has a problem,
depending on the way I start it.
If I start kdenlive (video editing) by clicking on a file in dolphin, it works
as expected, i.e. it can play music files as well as video clips including
video and audio.
If
Hi,
I've just upgraded two installations from jessie to stretch. Both have digikam
installed. First installation runs digikam without any problem. But on the
second one I've a shared library error:
Digikam: error while loading shared libraries: libgphoto2_port.so.10: cannot
open shared object
Dear all,
not a Debian specific question, but I hope to get an answer here...
I try to use inotifywait in a bash script to block until a file in a directory
gets changed. Then the script should continue. That's working well unless the
path I hand over to inotifywait contains spaces.
I already
Dear all,
thank you for your inputs - indeed, I had to add "eval" to my script to get it
working.
Best,
Bernd
On Samstag, 2. Dezember 2017 17:10:10 CET you wrote:
> Dear all,
>
> not a Debian specific question, but I hope to get an answer here...
>
> I try to use inotifywait in a bash script
Hi,
I configured my system such that some users are in group sudo, but they are
asked for the root password instead of just their user password by creating a
file within /etc/sudoers.d/ with the line:
Defaults rootpw
This is working just fine, but for graphical applications it doesn't work: e.g
On Thu, 2023-04-06 at 11:04 -0400, Jeffrey Walton wrote:
> On Thu, Apr 6, 2023 at 8:36 AM B.M. wrote:
> >
> > I configured my system such that some users are in group sudo, but
> > they are
> > asked for the root password instead of just their user password by
> >
Dear all,
I just dist-upgraded my Raspberry Pi from buster to bookworm, and while
ssh -Y...
worked like a charm in before the update and I could start any X11 program
over ssh, it doesn't work anymore since then. Executing
ssh -Y -C -l myUser otherHostname.local -v
I get
...
debug1: Requestin
On Montag, 7. August 2023 15:19:49 CEST you wrote:
> Dear all,
>
> I just dist-upgraded my Raspberry Pi from buster to bookworm, and while
>
> ssh -Y...
>
> worked like a charm in before the update and I could start any X11 program
> over ssh, it doesn't work anymore since then. Executing
>
> ssh -
On Montag, 7. August 2023 16:33:26 CEST you wrote:
> On Montag, 7. August 2023 15:19:49 CEST you wrote:
> > Dear all,
> >
> > I just dist-upgraded my Raspberry Pi from buster to bookworm, and while
> >
> > ssh -Y...
> >
> > worked like a charm in before the update and I could start any X11 program
Hi,
I have a small server (Raspberry Pi 4 in fact) and since a couple of weeks it
repeatedly hangs after some days until I reboot it (after months of uptime
without any problem - but I changed a few things in the meantime, so maybe
load is now higher than before).
At least after installing watchd
On Montag, 28. Oktober 2024 15:21:02 CET Dan Ritter wrote:
> B.M. wrote:
> > Hi,
> >
> > I have a small server (Raspberry Pi 4 in fact) and since a couple of weeks
> > it repeatedly hangs after some days until I reboot it (after months of
> > uptime without any pro
27 matches
Mail list logo
