Greetings-
Upgrading to 2.4.18 today, I seem to have broken my openAFS client
configuration. Using *either* version (the one from testing on debian.org
or 1.2.4 from openafs.org) of openafs-modules-source, when I do make-kpkg
modules_image the make fails thus:
../afs/../afs/../rx/../rx/rx_kmutex
No, I don't think you're right. Hubs are effectively passive, so they
don't "count" as a termination point (IIRC). Switches -- or, for that
matter, repeaters -- do, since they are active devices.
ap
--
Andrew J Perrin - http://w
I use jpilot and have been very happy with it. I'm a little old-fashioned
so my desktop is fvwm2, not gnome or kde, and jpilot is a nice,
stand-alone, reliable interface to the palm.
--
Andrew J Perrin - http://www.unc.edu/~aperri
fine.
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Mon, 10 Jun 2002, Andrew Perrin wrote:
> Greetings-
>
> Upgrading to 2.4.18 today, I see
I'd like to upgrade my home machine's kernel to 2.4.18, but I'm not too
excited about moving from ipchains to iptables. (This machine acts as a
router from the home network [on eth0] and our DSL service [eth1].) So, a
few questions:
- How easy or hard is it to migrate an ipchains ruleset to iptab
Has anyone got one of these working? It's a CoStar LabelWriter XL, a
serial label printer. Theoretically a driver called pbm2lwxl is supposed
to drive it, but I get no results whatsoever. If anyone's got one going
I'd appreciate a hand.
-
This is a followup to yesterday's attempt to get a CoStar Labelwriter XL
working under linux.
I plugged the thing into a windows laptop and it printed fine, so the
problem is not in the printer.
If I start statserial, point it at /dev/ttyS1, and plug/unplug the printer
from the computer, the CTS/
1.) Don't both with linking to linux. Just:
cd /usr/src/kernel-source-2.4.18
make menuconfig
make-kpkg
2.) Don't use --revision to note the kernel version; make-kpkg will do
that for you. Use --revision if you want to tag it to specific config
options you've used. I generally do:
make-kpkg --rev
On Mon, 17 Jun 2002, Francisco Fialho wrote:
> is there any command I can use to see what kernel I'm using?!
uname -a
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
PROTECTED] * andrew_perrin (at) unc.edu
On Mon, 17 Jun 2002, Francisco Fialho wrote:
> Andrew Perrin wrote:
>
> >On Mon, 17 Jun 2002, Francisco Fialho wrote:
> >
> >>is there any command I can use to see what kernel I'm using?!
> >>
> >
> >uname -a
8-.deb
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Mon, 17 Jun 2002, Francisco Fialho wrote:
> Andrew Perrin wrote:
>
> >Yes. You need to
Here's what I do:
apt-get install kernel-source-2.4.18
cd /usr/src/kernel-source-2.4.18
make menuconfig
(select/deselect for your needs)
make-kpkg --revision ofc1.x binary
cd /usr/src
dpkg -i kernel-image-2.4.18_ofc1.x_i386.deb
reboot
-
On Mon, 17 Jun 2002, Francisco Fialho wrote:
> >>Try:
> >>
> >>ls -l /usr/src/kernel*deb
> >
[snip]
> I ran an find / -name kernel-image*.*
> and there was no result ( I ran make-kpkg twice) :-)
>
> any clue?!
>
The clue is: follow directions! What is the output of:
ls /usr/src/kernel*deb
Well, after lots of e-mails, phone calls, and tests, I'm giving up (at
least for now) on getting this CoStar LabelWriter XL working on my IBM
NetVista running Debian Woody. I'm sending this message mostly for the
archives, in case anyone runs across a similar scenario in the future, but
if anyone
On Thu, 20 Jun 2002, Paul E Condon wrote:
[snip]
> Also here, the tarball must be untarred, which I figured out myself, and
>
Sorry - forgot that step!
> there must be a softlink
> /usr/src/linux that points to
> /usr/src/kernel-sources-2.4.18,
> which was pointed out to me by Griz Inabnit
>
Yes, it's possible. I think you need to do something like this:
- Install the new hard drive.
- Boot to your old hard drive.
- Partition the new hard drive as desired, including the partitions you
need for replacing the old drive.
- Make the necessary filesystems.
- Use tar (or something else) to
in (at) unc.edu
On Fri, 21 Jun 2002, Paul E Condon wrote:
> On Fri, Jun 21, 2002 at 08:59:32AM -0400, Andrew Perrin wrote:
> > On Thu, 20 Jun 2002, Paul E Condon wrote:
> >
> > [snip]
> >
> > > Also here, the tarball must be untarred, which I figured out m
This is an old issue, but it's started to bug me again.
On my home machine (used to be potato 2.2.19pre17, it's now woody 2.4.18),
ipmasq and openafs-client don't start up correctly from /etc/init.d. The
scripts are there, and appear to be linked correctly, but the following
happens:
- With ipma
u/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On 9 Jun 2002, Kevin - The Alchemist - Sonney wrote:
> On Sun, 2002-06-09 at 20:38, Andrew Perrin wrote:
> > Has anyone used one of these storage "keys" (e.
On Wed, 26 Jun 2002, René Seindal wrote:
>
> Run netscape as "netscape --no-remote"
[snip]
> Since mozilla in some ways is netscape5, netscape and mozilla use the
> same protocol to communicate with an already running browser. There is
> no other way around than the above.
>
Not true! If you
I had a nasty morning this morning.
I had bought a cheap PCI serial card to try to diagnose and/or fix the
problem documented in:
http://www.trilug.org/pipermail/trilug/Week-of-Mon-20020617/008541.html
Somehow, when I installed it, something happened to the network card -
probably related to a h
The "new" LILO (22.2) doesn't seem to allow that - I can only select from
a menu. Have I missed something?
Anyway, booting single doesn't help by itself, because openAFS still tried
to load when coming up in single-user mode. I'll try the init=/bin/sh
trick next time.
Thanks to all.
On Sat, 29 Jun 2002, Colin Watson wrote:
> On Sat, Jun 29, 2002 at 04:21:21AM -0500, Alex Malinovich wrote:
> ... Be sure to
> print enough spaces to completely overwrite the previous text if what
> you're printing is shorter
printf() is your friend for this issue.
--
A report and a request for advice:
After doing some research, I decided to buy an iRiver T30 for use as a
small digital voice recorder for meetings, interviews, and so on. It's a
very cool little device and the sound quality is also amazing.
However, as far as I can tell, it doesn't work at all u
On Fri, 16 Sep 2005, J French wrote:
> Hello,
> We are setting up Debian Linux on a new server for a PostGreSQL database. In
> the past, on FreeBSD, I used the dump utility with the live filesystem
> (snapshot) switch to backup the running database. Does dump on linux support
> live filesystem bac
On Sun, 13 Nov 2005, Carl Johnson wrote:
> [snip]
> I have similar problems, and I know it isn't used by the buffers and
> cache as others have already suggested.
How, pray tell, do you know this?
ap
--
Andrew J Perrin - http:/
Greetings-
I use a TV-in card that is driven by the bttv module. Under kernel 2.4.x
it worked fine; now, under 2.6.x, the video works fine but the audio is a
constant "buzz". Perhaps more interesting, muting the audio makes the buzz
stop, which suggests perhaps that the audio decoder is set wr
On Tue, 6 Dec 2005, Richard Lyons wrote:
The problem is that installed software sometimes refuses to run, giving
'file not found', in spite of the fact that the file in question will ls
normally, permissions are ok, etc, and I can even cat the file. This
happens only with certain files, for ex
On Tue, 6 Dec 2005, Richard Lyons wrote:
On Tuesday, 6 December 2005 at 1:11:32 +, Andrew Perrin wrote:
On Tue, 6 Dec 2005, Richard Lyons wrote:
The problem is that installed software sometimes refuses to run, giving
'file not found', in spite of the fact that the file i
On Tue, 6 Dec 2005, Richard Lyons wrote:
On Tuesday, 6 December 2005 at 12:00:24 +0100, Almut Behrens wrote:
On Tue, Dec 06, 2005 at 08:41:46AM +, Richard Lyons wrote:
[...]
$ ./qcad
bash: ./qcad: No such file or directory
[...]
Maybe it's missing some vital library or somesuc
#3210, Chapel Hill, NC 27599-3210 USA
On Tue, 6 Dec 2005, Richard Lyons wrote:
On Tuesday, 6 December 2005 at 14:20:08 +, Andrew Perrin wrote:
On Tue, 6 Dec 2005, Richard Lyons wrote:
tiramisu:/opt/qcad-2.1.0.0-rc1-1-prof.linux.lcpp5.x86# ldd ./qcad
/usr/bin/ldd: line 171: /lib/ld
On Tue, 6 Dec 2005, Rakotomandimby Mihamina wrote:
Hi,
I have an HP 2200C USB scanner. I am running "unstable" I installed sane
and xsane. When I turn the scanner on, sane-find-scanner finds it when
launched as root. The problem is when I launch xsane as root, I find the
scanner and may scan
On Wed, 7 Dec 2005, Rakotomandimby Mihamina wrote:
On Tue, 2005-12-06 at 22:22 +, Andrew Perrin wrote:
means it can be found at:
/proc/bus/usb/001/004
Does that mean that changing the ownership of this device will be
definitive? I would like to know how to do so.
Yes, changing
On Tue, 6 Dec 2005, Brian C wrote:
Hi,
/dev/hda is the Debian Sarge system, w/ 3 partitions.
/dev/hdb is a new slightly larger drive w/ no partitions.
/dev/hda may have a bad block or two, and so the plan is to clone it to the
new drive, remove the old drive, move new drive to /dev/hda (prima
On Wed, 7 Dec 2005, Hugo Vanwoerkom wrote:
cd /old-partition-mount ; tar cf - . | (cd /mnt/tmp ; tar xf -)
What does the dot do?
current directory
--
Andrew J Perrin - andrew_perrin (at) unc.edu - http://www.unc.edu/~aperr
501 - 535 of 535 matches
Mail list logo
