On 9/01/19 6:04 PM, Jude DaShiell wrote:
> lsblk -l -o name,label | sort | script
lsblk -ln -o name,label |sort |
Hello,
I am just wondering why ipv6 gets configured for enp1s0, even though I do not
request that in /etc/network/interfaces (?).
I suspect NetworkManager takes care of that, but I always thought, network
manager does not touch interfaces mentioned in /etc/network/interface?
System is stretch.
Hi!
Since latest upgrades debian boots into initramfs shell:
Gave up Waiting for suspend/resum device
Gave up waiting for root file system device. Gommon problems:
...
ALERT! UUID=c92b... does not exist.
Dropping to a shell!
Looking at devices, none exist: /dev/sda* are all missing.
Looking at
Hi.
On Wed, Jan 09, 2019 at 10:42:27AM +0100, Rainer Dorsch wrote:
> Hello,
>
> I am just wondering why ipv6 gets configured for enp1s0, even though I do not
> request that in /etc/network/interfaces (?).
> 2: enp1s0: mtu 1500 qdisc pfifo_fast state
> UP
> group default qlen 1000
>
On Wed, 9 Jan 2019, Felix Miata wrote:
> Date: Wed, 9 Jan 2019 01:47:24
> From: Felix Miata
> To: debian-user@lists.debian.org
> Subject: Re: Taming the "lsblk" command
> Resent-Date: Wed, 9 Jan 2019 06:47:41 + (UTC)
> Resent-From: debian-user@lists.debian.org
>
> Jude DaShiell composed on 2
Jude DaShiell composed on 2019-01-09 06:48 (UTC-0500):
> Felix Miata wrote:
>> Jude DaShiell composed on 2019-01-09 00:04 (UTC-0500):
>>> lsblk -l -o name,label | sort | script
>> I tried exactly that on Buster multiple times, and always get the following:
>> root@gb250:~# NAME LABEL
>> bash:
Thomas Schweikle wrote:
> Hi!
>
> Since latest upgrades debian boots into initramfs shell:
>
> Gave up Waiting for suspend/resum device
> Gave up waiting for root file system device. Gommon problems:
> ...
>
> ALERT! UUID=c92b... does not exist.
> Dropping to a shell!
>
> Looking at devices, none e
On Wednesday, January 09, 2019 03:01:42 AM Richard Hector wrote:
> On 9/01/19 6:04 PM, Jude DaShiell wrote:
> > lsblk -l -o name,label | sort | script
>
> lsblk -ln -o name,label |sort |
On 2019-01-09, rhkra...@gmail.com wrote:
> On Wednesday, January 09, 2019 03:01:42 AM Richard Hector wrote:
>> On 9/01/19 6:04 PM, Jude DaShiell wrote:
>> > lsblk -l -o name,label | sort | script
>>
>> lsblk -ln -o name,label |sort |
I am looking for software to symmetric-encrypt large numbers of files on
disk (terabytes' worth of data), and would appreciate some advice.
My basic requirements:
- It should be open source and no-cost (though, since I'm asking this
question here, this goes without saying);
- I should be
Hi,
I was using emacs and mercurial from the command line to develop small
scripts in python.
I'm trying KDevelop, and I'd like to use mercurial directly from KDevelop.
It seems to be possible, as said here : https://www.kdevelop.org/features
There's a small * explaining "*Items marked with * m
Hello.
Some time ago I read the kernel 4.19 include support for some Mediatek
802.11ac USB devices. When I saw the kernel 4.19 arrived into
unstable/testing I ordered one of these devices.
The device arrived but it does not work at all. A quick look at the kernel
configuration shows those modules
On Wed 09 Jan 2019 at 13:54:45 (+), Curt wrote:
> On 2019-01-09, rhkra...@gmail.com wrote:
> > On Wednesday, January 09, 2019 03:01:42 AM Richard Hector wrote:
> >> On 9/01/19 6:04 PM, Jude DaShiell wrote:
> >> > lsblk -l -o name,label | sort | script
> >>
> >> lsblk -ln -o name,label |sort |
Am Mittwoch, 9. Januar 2019 schrieb Thomas Schweikle:
> Hi!
>
> Since latest upgrades debian boots into initramfs shell:
>
> Gave up Waiting for suspend/resum device
> Gave up waiting for root file system device. Gommon problems:
> ...
>
> ALERT! UUID=c92b... does not exist.
> Dropping to a shell!
Hello.
Some time ago I read the kernel 4.19 include support for some Mediatek
802.11ac USB devices. When I saw the kernel 4.19 arrived into
unstable/testing I ordered one of these devices.
The device arrived but it does not work at all. A quick look at the
kernel configuration shows those modules
On Wed 09 Jan 2019 at 07:51:31 (-0500), Felix Miata wrote:
> Jude DaShiell composed on 2019-01-09 06:48 (UTC-0500):
>
> > Felix Miata wrote:
>
> >> Jude DaShiell composed on 2019-01-09 00:04 (UTC-0500):
>
> >>> lsblk -l -o name,label | sort | script
>
> >> I tried exactly that on Buster multipl
what works over here:
lsblk -n < /usr/bin/sort
--
Jude DaShiell:
> what works over here:
> lsblk -n < /usr/bin/sort
This command feeds the content of the file /usr/bin/sort into stdin of
lsblk. That does not make sense and I guess lsblk is just ignoring this
input.
J.
--
I enjoy shopping, eating, sex and doing jigsaw puzzles of idealised
landsc
It would if you had entered it backward. Now I'm going to have to do a
typescript for you.
On Wed, 9 Jan 2019, Jochen Spieker wrote:
> Date: Wed, 9 Jan 2019 10:17:50
> From: Jochen Spieker
> To: debian-user@lists.debian.org
> Subject: Re: taming lsblk command
>
> Jude DaShiell:
> > what works ov
On Wed, 9 Jan 2019, Jochen Spieker wrote:
> Date: Wed, 9 Jan 2019 10:17:50
> From: Jochen Spieker
> To: debian-user@lists.debian.org
> Subject: Re: taming lsblk command
>
> Jude DaShiell:
> > what works over here:
> > lsblk -n < /usr/bin/sort
>
> This command feeds the content of the file /usr/bi
On 01/09/2019 08:14 AM, David Wright wrote:
On Wed 09 Jan 2019 at 13:54:45 (+), Curt wrote:
On 2019-01-09, rhkra...@gmail.com wrote:
On Wednesday, January 09, 2019 03:01:42 AM Richard Hector wrote:
On 9/01/19 6:04 PM, Jude DaShiell wrote:
lsblk -l -o name,label | sort | script
lsblk -l
On Wed, Jan 09, 2019 at 10:31:46AM -0500, Jude DaShiell wrote:
> jude[~]$ lsblk -n < /usr/bin/sort
> sda 8:00 111.8G 0 disk
> ??sda1 8:10 111.8G 0 part /
> ??sda2 8:20 32.5M 0 part [SWAP]
> sdb 8:16 0 55.9G 0 disk
> ??sdb1 8:17 055G 0 part
> sr
On Wed, Jan 09, 2019 at 10:31:46AM -0500, Jude DaShiell wrote:
> On Wed, 9 Jan 2019, Jochen Spieker wrote:
>
> > Date: Wed, 9 Jan 2019 10:17:50
> > From: Jochen Spieker
> > To: debian-user@lists.debian.org
> > Subject: Re: taming lsblk command
> >
> > Jude DaShiell:
> > > what works over here:
>
On Jan 09, 2019 at 15:06:57, Sébastien Kalt wrote:
> I'm trying KDevelop, and I'd like to use mercurial directly from KDevelop.
>
> It seems to be possible, as said here : https://www.kdevelop.org/features
>
> There's a small * explaining "Items marked with * might require an extra
> package to
On 2019-01-09 14:14, David Wright wrote:
On Wed 09 Jan 2019 at 13:54:45 (+), Curt wrote:
On 2019-01-09, rhkra...@gmail.com wrote:
> On Wednesday, January 09, 2019 03:01:42 AM Richard Hector wrote:
>> On 9/01/19 6:04 PM, Jude DaShiell wrote:
>> > lsblk -l -o name,label | sort | script
>>
>>
On 09.01.2019 15:20, Stefan Krusche wrote:
> Am Mittwoch, 9. Januar 2019 schrieb Thomas Schweikle:
>> Hi!
>>
>> Since latest upgrades debian boots into initramfs shell:
>>
>> Gave up Waiting for suspend/resum device
>> Gave up waiting for root file system device. Gommon problems:
>> ...
>>
>> ALERT
On 09.01.2019 14:00, songbird wrote:
> Thomas Schweikle wrote:
>> Hi!
>>
>> Since latest upgrades debian boots into initramfs shell:
>>
>> Gave up Waiting for suspend/resum device
>> Gave up waiting for root file system device. Gommon problems:
>> ...
>>
>> ALERT! UUID=c92b... does not exist.
>> Dr
On 2019-01-09, Richard Owlett wrote:
> On 01/09/2019 08:14 AM, David Wright wrote:
>> On Wed 09 Jan 2019 at 13:54:45 (+), Curt wrote:
>>> On 2019-01-09, rhkra...@gmail.com wrote:
On Wednesday, January 09, 2019 03:01:42 AM Richard Hector wrote:
> On 9/01/19 6:04 PM, Jude DaShiell wrot
Miguel A. Vallejo wrote:
> Some time ago I read the kernel 4.19 include support for some Mediatek
> 802.11ac USB devices. When I saw the kernel 4.19 arrived into
> unstable/testing I ordered one of these devices.
>
> The device arrived but it does not work at all. A quick look at the
> kernel con
On Jan 09, 2019 at 16:56:05, Thomas Schweikle wrote:
> On 09.01.2019 14:00, songbird wrote:
> > Thomas Schweikle wrote:
> >>
> >> Since latest upgrades debian boots into initramfs shell:
> >>
> >> Gave up Waiting for suspend/resum device
> >> Gave up waiting for root file system device. Gommon prob
Thomas Schweikle wrote:
> Did you read my post? /dev/sd* are missing, but modules are loaded!
>
you mean modules for the disks?
> Looks like /dev/sd* entries are not created.
is udev OK?
On 1/9/19 6:05 AM, Kynn Jones wrote:
I am looking for software to symmetric-encrypt large numbers of files on
disk (terabytes' worth of data), and would appreciate some advice.
My basic requirements:
- It should be open source and no-cost (though, since I'm asking this
question here, th
On Mon 07 Jan 2019 at 23:51:36 (+), Brian wrote:
> On Mon 07 Jan 2019 at 14:37:30 -0600, David Wright wrote:
> > On Mon 07 Jan 2019 at 18:21:07 (+), Brian wrote:
> > > On Sun 06 Jan 2019 at 18:13:58 -0600, David Wright wrote:
> > >
> > > [...]
> > >
> > > > BTW if this Screenshot method i
On Wed 09 Jan 2019 at 16:13:19 (+), mick crane wrote:
> On 2019-01-09 14:14, David Wright wrote:
> > On Wed 09 Jan 2019 at 13:54:45 (+), Curt wrote:
> > > On 2019-01-09, rhkra...@gmail.com wrote:
> > > > On Wednesday, January 09, 2019 03:01:42 AM Richard Hector wrote:
> > > >> On 9/01/19 6
Thank you for your response. I cannot find anything on how to fix “deref”, so i
can get rid of these log entries. Anyone have an answer on this?
Kelvin
> On Jan 7, 2019, at 2:57 PM, Dan Ritter wrote:
>
> Kelvin Jones wrote:
>> My syslog is being filled up with
>>
>> Jan 7 00:10:06 magpie s
On Wed 09 Jan 2019 at 12:47:42 -0600, David Wright wrote:
> On Mon 07 Jan 2019 at 23:51:36 (+), Brian wrote:
> > On Mon 07 Jan 2019 at 14:37:30 -0600, David Wright wrote:
> > > On Mon 07 Jan 2019 at 18:21:07 (+), Brian wrote:
> > > > On Sun 06 Jan 2019 at 18:13:58 -0600, David Wright wrote
Hello,
I have create a software raid level 1 with mdadm.
One drive is a "classic" HDD.
The 2'nd drive is a SSD with option "write-mostly".
Over the raid I have create and LVM with all the partitions (root,swap
and qemu/KVM VM's).
When I understand mdadm the hole space is marked as used.
So my qu
On Wed, Jan 09, 2019 at 12:45:02PM -0600, David Wright wrote:
But returning to lsblk, I can't figure out why the OP's lsblk -l
appears in such an odd order. Does it differ from that given by
lsblk with no arguments?
I've checked the unsorted order of my /sys/dev/block, which is
essentially rando
Hi Reco,
many thanks, your answer worked well.
Rainer
Am Mittwoch, 9. Januar 2019, 11:23:46 CET schrieb Reco:
> Hi.
>
> On Wed, Jan 09, 2019 at 10:42:27AM +0100, Rainer Dorsch wrote:
> > Hello,
> >
> > I am just wondering why ipv6 gets configured for enp1s0, even though I do
> > not requ
Hi,
I have a system with two network interfaces, connecting to two subnets.
For some reason the default route is going through eth0.3, I would want to
have it through eth0.7.
Is the default route determined by the order in /etc/network/interface of the
interfaces or is there another algorithm
i have stretch, but can't boot it, i think its grub is bad, i want to boot into
it so that i can run grub-install to fix it.
i have wheezy CD, it has rescue option, is it possible to use it to boot
stretch? in early Debian CD, it's possible. Thanks!
On Wed, Jan 09, 2019 at 10:26:51PM +, Long Wind wrote:
>i have stretch, but can't boot it, i think its grub is bad, i want to boot
>into it so that i can run grub-install to fix it.
>i have wheezy CD, it has rescue option, is it possible to use it to boot
>stretch? in early Debi
Le 09/01/2019 à 10:29, Thomas Schweikle a écrit :
Since latest upgrades debian boots into initramfs shell:
(...)
Booting into rescue mode with the very same kernel/initrd works:
Consistently ? AFAIK, the only difference between normal and rescue mode
which may affect the initramfs process i
On 1/9/19, Rainer Dorsch wrote:
> Hi,
>
> I have a system with two network interfaces, connecting to two subnets.
>
> For some reason the default route is going through eth0.3, I would want to
> have it through eth0.7.
further down you've got:
rd@master:~$ ip r
default via 192.168.3.1 dev eno1.3
Kynn Jones writes:
I am looking for software to symmetric-encrypt large numbers of files on disk
(terabytes' worth of data), and would appreciate some advice.
My basic requirements:
• It should be open source and no-cost (though, since I'm asking this
question here, this goes without sayin
Le 09/01/2019 à 22:22, basti a écrit :
I have create a software raid level 1 with mdadm.
One drive is a "classic" HDD.
The 2'nd drive is a SSD with option "write-mostly".
Why did you flag the SSD as write-mostly ? I would have expected the
opposite.
Over the raid I have create and LVM with
Le 09/01/2019 à 23:26, Long Wind a écrit :
i have wheezy CD, it has rescue option, is it possible to use it to boot
stretch?
Not always. Wheezy's kernel and e2fsprogs tools do not support newer
ext4 features such as csum_metadata which are enabled by default on ext4
filesystems created by St
On Fri 04 Jan 2019 at 19:36:42 (-0500), Felix Miata wrote:
> David Wright composed on 2019-01-04 14:27 (UTC-0600):
> > On Fri 04 Jan 2019 at 13:41:33 (-0500), Felix Miata wrote:
> >> David Wright composed on 2019-01-04 10:19 (UTC-0600):
> >> > On Fri 04 Jan 2019 at 04:30:00 (-0500), Felix Miata wro
Thanks, i browse Help of wheezy CD, i don't know what rescue it can do
its advanced option allows you to specify boot option before boot,vmlinuz,
initrd, root=/dev/sda2 ...
(my stretch is installed at sda2)
but initrd on CD is intended for install, not for my purpose
no luck, i may have to find ot
On Wed 09 Jan 2019 at 16:36:16 (-0500), Michael Stone wrote:
> On Wed, Jan 09, 2019 at 12:45:02PM -0600, David Wright wrote:
> > But returning to lsblk, I can't figure out why the OP's lsblk -l
> > appears in such an odd order. Does it differ from that given by
> > lsblk with no arguments?
> >
> >
On 1/9/19 1:22 PM, basti wrote:
Hello, I have create a software raid level 1 with mdadm.
One drive is a "classic" HDD. The 2'nd drive is a SSD with option
"write-mostly".
Over the raid I have create and LVM with all the partitions
(root,swap and qemu/KVM VM's).
When I understand mdadm the
On Wed, 9 Jan 2019 09:05:32 -0500
Kynn Jones wrote:
> I am looking for software to symmetric-encrypt large numbers of files on
> disk (terabytes' worth of data), and would appreciate some advice.
>
> My basic requirements:
>
>- It should be open source and no-cost (though, since I'm asking
Hi.
On Wed, Jan 09, 2019 at 11:09:58PM +0100, Rainer Dorsch wrote:
> Hi,
>
> I have a system with two network interfaces, connecting to two subnets.
>
> For some reason the default route is going through eth0.3, I would want to
> have it through eth0.7.
Both of your VLANs are configur
On 10/01/2019 03:05, Kynn Jones wrote:
The only encryption tool I have used for encrypting files on my hard drive
is gpg2, which I have used for small, interactive encryption tasks
(half-dozen files, at most).
Therefore, my initial attempt was to use gpg2 for this new bulk-encryption
task, but I
Le 10/01/2019 à 01:21, Long Wind a écrit :
Thanks, i browse Help of wheezy CD, i don't know what rescue it can do
its advanced option allows you to specify boot option before boot,vmlinuz,
initrd, root=/dev/sda2 ...
(my stretch is installed at sda2)
but initrd on CD is intended for install, not
Long Wind wrote:
...
> but initrd on CD is intended for install, not for my purpose
> no luck, i may have to find other way
can you download and create a USB stick with the
relevant netinst image on it?
that has a rescue aspect which should be compatible.
songbird
Hello,
This is a General Post about using Debian. But it refers to a thread I
started, when I jumped to a crazy conclusion, based on insufficient testing
before requesting help.
The original thread is here:
https://lists.debian.org/debian-user/2019/01/msg00328.html
I am a Computer Consultant,
57 matches
Mail list logo
