Hi,
I would like to get apt source code via VCS(git,bzr,svn...). I do not
find the repository of apt.
I have cloned aptitude
repository(git://git.debian.org/aptitude/aptitude.git) and am reading
the code. I find it refers to apt class. I would like to look into apt
code.
Is there a repot of apt?
I
I'm not yet check my server because user still access it in office hour.
Tonight i'm checking my BIOS, thank you for advice about data recovery, i
have rebuild recovery server using bacula backup system and now running in
my production system. If i'm still have problem, i post my problem again,
i'm
On 05/13/2011 02:53 AM, Stan Hoeppner wrote:
On 5/12/2011 5:19 AM, Rainer Dorsch wrote:
Hello,
I added an SSD in my system and moved the root filesystem to the SSD
(which
includes now also most of /home in my system). I spin down the
regular hard
disks and the system is a lot more quiet than
Markus Neviadomski wrote:
of the broken disk to a new disk. On the new one, you can run fsck
without pain or use one of the recovery tools on ultimate boot cd.
dd is your friend:
dd if=/dev/sdxx of=disk.image bs=250M
I always had good luck using that tool to recover bad disks and/or
transfer
On Thu, May 12, 2011 at 3:52 PM, shawn wilson wrote:
> grrr, for the list :)
>
>
> -- Forwarded message --
> From: shawn wilson
> Date: Thu, May 12, 2011 at 3:52 AM
> Subject: Re: dpkg died.
> To: Magicloud Magiclouds
>
>
> On Thu, May 12, 2011 at 3:41 AM, Magicloud Magiclouds
>
Hello,
On Fri, May 13, 2011 at 03:29:45PM +0800, Edmond Halley wrote:
> I would like to get apt source code via VCS(git,bzr,svn...). I do not
> find the repository of apt. [...]
> Is there a repot of apt?
Your first stop for checking something like this would be
http://packages.qa.debian.org/
whi
Hi,
I'd like to try out gnome3. So I had a laptop for a installation of
debian testing.
Then I installed xorg from testing branch. With '# startx', I had
the xterm window. But when I exited, the console turned into
framebuffer mode. /proc/fb shows interdrmfb.
What happened? Did the stage with
Am 13.05.2011 09:46, schrieb Jeroen van Aart:
> Markus Neviadomski wrote:
>> of the broken disk to a new disk. On the new one, you can run fsck
>> without pain or use one of the recovery tools on ultimate boot cd.
>
> dd is your friend:
> dd if=/dev/sdxx of=disk.image bs=250M
>
> I always had good
On Fri, May 13, 2011 at 09:57 +0200, Florian Ernst wrote:
> Hello,
>
> On Fri, May 13, 2011 at 03:29:45PM +0800, Edmond Halley wrote:
> > I would like to get apt source code via VCS(git,bzr,svn...). I do not
> > find the repository of apt. [...]
>
> Your first stop for checking something like thi
I''m sorry i have using dd for long time ago, my data not corrupted just why
my server like "sleep"..thanks for your advise..:-)
On Fri, May 13, 2011 at 3:11 PM, Markus Neviadomski
wrote:
> Am 13.05.2011 09:46, schrieb Jeroen van Aart:
> > Markus Neviadomski wrote:
> >> of the broken disk to a new
---
|Bсе для ЧАCТHОГО ПРEДПPИНИМАТЕЛЯ. Bсe возможныe схeмы c 1.04.2011
|
|Пpoвeрки ПPЕДПPИНИМАТЕЛЯ - мexанизмы Нaлoгового кoдекса,
|
|рeгулирующие дeйствия пpeдпринимателя в cлуч
Chuyên bat động sản khu vực Vân Trì, Cổ Loa…..Huyện Đông Anh và Sóc Sơn.
Tư vấn đầu tư bất động sản, uy tín, thành công, LH: anh Lượng - DT:
01634121222..
Tôi có thể tiên đoán giá bất động sản biến động chính xác vào cuối năm nay,
tôi sẽ nói lý do cho bạn biết khi bạn gọi tôi.
Chúc đầu tư thành
On 5/13/2011 2:38 AM, Doug wrote:
> According to some information on the various lists, you should *not* run
> swap on
> a SSD, because the SSD has a limited number of read/write cycles, and
> swap uses
> them up way too quickly.
That's pure FUD. Read the following soup to nuts:
http://www.stora
Stan Hoeppner wrote:
On 5/12/2011 5:19 AM, Rainer Dorsch wrote:
Hello,
I added an SSD in my system and moved the root filesystem to the SSD
(which
includes now also most of /home in my system). I spin down the
regular hard
disks and the system is a lot more quiet than before :-)
Sometimes t
I try to connect two pc hosts with serial ports with a null modem cable.
I assumed starting kermit on both ends, setting line, speed etc. to
suitable values would allow me to see what I type on the other end. But
no such luck.
I admit it is 9 years since I last used serial ports for anything,
Dne, 13. 05. 2011 11:58:43 je Aldyth Maharsha napisal(a):
I''m sorry i have using dd for long time ago, my data not corrupted
You said you had a "partition error" in your original post?
just why my server like "sleep"..thanks for your advise..:-)
Like others have said, it's probably a setti
On 2011-05-13 02:29, Michael Selinger wrote:
Hello,
I'm interested in trying out Debian's OS. I downloaded from your
website, which
took a half hour even with a high speed cable connection. I then sent it
on to my
E-drive, to burn it onto a disc. After 17 mins., I forced a
shutdown...log message
On 20110513_065059, Stan Hoeppner wrote:
> On 5/13/2011 2:38 AM, Doug wrote:
>
> > According to some information on the various lists, you should *not* run
> > swap on
> > a SSD, because the SSD has a limited number of read/write cycles, and
> > swap uses
> > them up way too quickly.
>
> That's
Dne, 13. 05. 2011 03:14:28 je Chris napisal(a):
Make sure you are burning as an iso image and not just burning the
actual file to the media
Sent from my BlackBerry®
-Original Message-
From: Michael Selinger
Date: Thu, 12 May 2011 17:29:58
To:
Subject: Download onto CD failed to burn
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi, can you give this a try?
http://code.google.com/p/fglrx-squeeze/downloads/detail?name=11-5-0panayk1_amd64.tar.bz2&can=2&q=#makechanges
- --
Best regards,
Panayiotis Karabassis
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (GNU/Linux)
On Thu, 12 May 2011 14:20:43 +0200, Elias Diem wrote:
> I installed Debian 6 on my HP Pavilion Netbook. Unfortunately the WiFi
> Card is not working. I plan to install a driver manually but don't know
> which driver to grab.
>
> lspci -vv tells me
>
> 02:00.0 Network controller: RaLink Device 5
On 20110513_154337, Klistvud wrote:
> Dne, 13. 05. 2011 03:14:28 je Chris napisal(a):
> >Make sure you are burning as an iso image and not just burning the
> >actual file to the media
> >Sent from my BlackBerry®
> >
> >-Original Message-
> >From: Michael Selinger
> >Date: Thu, 12 May 2011
On Thu, 12 May 2011 21:02:47 +0100, Brad Rogers wrote:
> On Thu, 12 May 2011 22:30:49 +0300
> Rares Aioanei wrote:
>
> Hello Rares,
>
>> I couldn't fathom where to report this , so I'm hoping that here it
>> will meet the appropriate eyes. On http://wiki.debian.org/IRC
> {etc}
>
> It's a *wiki
# aticonfig --initial
aticonfig: No supported adapters detected
the same issue pop up.
P.S Installation log:
NOTE: the fglrx driver is not yet configued.
Please consider /usr/bin/aticonfig to create a
working xorg.conf configuration.
For example, 'sudo aticonfig --initial' should
be sufficient fo
Just wonder: How to examine it?
Thanks
On Fri, May 13, 2011 at 10:33 PM, lina wrote:
> # aticonfig --initial
> aticonfig: No supported adapters detected
>
> the same issue pop up.
>
> P.S Installation log:
> NOTE: the fglrx driver is not yet configued.
> Please consider /usr/bin/aticonfig to cre
On Thu, 12 May 2011 16:10:45 -0700, Robert Holtzman wrote:
> On Wed, May 11, 2011 at 08:30:49PM +, Camale�n wrote:
>> On Wed, 11 May 2011 11:55:48 -0700, Jeroen van Aart wrote:
>>
>> > Lisi wrote:
>> >> It is list policy not to send private replies to list mail. And I
>> >> thought that it w
On Thu, 12 May 2011 16:57:53 -0700, Robert Holtzman wrote:
> On Thu, May 12, 2011 at 09:59:42AM +, Camale�n wrote:
>
> .snip
>>
>> I'm fine if someone asks me off-list about anything (I reply almost all
>> of them) but something that is being discussed in a public
Further report:
also something like this: (the newly installed graphic driver does not
support openGL)
freeglut : OpenGL GLX extension not supported by display ':0.0'
ERROR) The X server does not support the OpenGL GLX extension. Exiting ...
Info) Unable to create OpenGL window.
Thanks,
On
Hi,
How can I get a copy (sample) of the xorg.conf for the fglrx driver?
Thanks ahead,
--
Best Regards,
lina
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/ban
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 05/13/2011 06:11 PM, lina wrote:
> also something like this: (the newly installed graphic driver does not
> support openGL)
Is this an issue only for the 11-5 driver, not 11-3? Then I probably
packaged it wrongly, please revert to 11-3.
Or it coul
On Thu, 12 May 2011 12:55:28 -0700, Peter Bonucci wrote:
> On Thursday, May 12, 2011 04:38:18 am Camaleón wrote:
>> I don't like that error :-/
>>
>> ***
>> 25 : Disk read error
>> This error is returned if there is a disk read error when trying to
>> probe or read data from a particular disk.
On Friday 13 May 2011 15:43:43 Camaleón wrote:
> On Thu, 12 May 2011 16:57:53 -0700, Robert Holtzman wrote:
> > On Thu, May 12, 2011 at 09:59:42AM +, Camale�n wrote:
> >
> > .snip
> >
> >> I'm fine if someone asks me off-list about anything (I reply almost all
> >> o
Serial ports can be pretty opaque.
Do you know if both serial ports were enabled in your BIOS? Can you find out
if the relevant ports appear enabled in the system logs?
Do you have any hardware diagnostic tools? i.e. one of those LED-based serial
port monitors?
Do you have flow control (RTS/
On Fri, May 13, 2011 at 11:23 PM, Panayiotis Karabassis
wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 05/13/2011 06:11 PM, lina wrote:
>> also something like this: (the newly installed graphic driver does not
>> support openGL)
>
> Is this an issue only for the 11-5 driver, not 1
On 2011-05-13 17:18, lina wrote:
Hi,
How can I get a copy (sample) of the xorg.conf for the fglrx driver?
Thanks ahead,
Hi,
you can look at $ man xorg.conf and here are examples
http://wiki.debian.org/ATIProprietary
--
Bye,
Goran Dobosevic
Hrvatski: www.dobosevic.com
English: www.dobosev
On Fri 13 May 2011 at 23:18:26 +0800, lina wrote:
> Hi,
>
> How can I get a copy (sample) of the xorg.conf for the fglrx driver?
http://wiki.debian.org/ATIProprietary
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...
On Fri 13 May 2011 at 08:26:07 -0600, Paul E Condon wrote:
> Even smaller than netinst, is the businesscard CD image. It is under
> 50MB long. It also is worth saving because it will continue to
> download and install the most recent version even after future updates
> of Squeeze make the current
I sometime get error messages like the one below; it usually repeats. When
this happens, I can not mount a usb thumb drive. The only way that I have
found to correct this condition is to reboot. Does anyone have an idea as to
what is going on, or how to investigate further?
-Chris
[65040.3
On Mi, 11 mai 11, 12:05:01, Rainer Dorsch wrote:
>
> I tested three setups:
>
> 1) Setup: rootflags and UUID fstab entry (the one I had before):
> Result: no configured options for root filesystem
>
> rd@blackbox:~$ cat /proc/cmdline
> BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686-bigmem
> root=UUID=
On Thu, 12 May 2011 17:29:58 -0700, Michael Selinger wrote:
> I'm interested in trying out Debian's OS. I downloaded from your
> website, which
> took a half hour even with a high speed cable connection. I then sent
> it on to my E-drive, to burn it onto a disc. After 17 mins., I forced a
>
Tapio,
From: Tapio Lehtonen
Date: Fri, 13 May 2011 16:04:30 +0300
> I try to connect two pc hosts with serial ports with a null modem cable.
PPP over a null modem and through modems and telephone lines have worked
here for years. Configurations here.
http://carnot.yi.org/NetworksPage.ht
On 20110513_171551, Brian wrote:
> On Fri 13 May 2011 at 08:26:07 -0600, Paul E Condon wrote:
>
> > Even smaller than netinst, is the businesscard CD image. It is under
> > 50MB long. It also is worth saving because it will continue to
> > download and install the most recent version even after fu
On Vi, 13 mai 11, 07:44:23, Lisi wrote:
>
> Once you have edited your sources list, you will need to update your apt
> database with these repositories, but you will need to get rid of the Squeeze
> data first, but I have never edited the apt datbase and that don't know how
> to do it.
Simply
On Fri, 13 May 2011 16:04:30 +0300, Tapio Lehtonen wrote:
> I try to connect two pc hosts with serial ports with a null modem cable.
> I assumed starting kermit on both ends, setting line, speed etc. to
> suitable values would allow me to see what I type on the other end. But
> no such luck.
(...
Did not check BIOS for port settings, I supposed ports are enabled since
dmesg and setserial show the port.
root@phb:~# dmesg | grep -i tty
[0.00] console [tty0] enabled
[1.072850] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[1.073628] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4)
Looks like a kernel bug:
https://bugzilla.kernel.org/show_bug.cgi?id=13316
Regards,
Burhan
On Fri, May 13, 2011 at 12:49 PM, Christopher Judd wrote:
> I sometime get error messages like the one below; it usually repeats. When
> this happens, I can not mount a usb thumb drive. The only way tha
On Fri, May 13, 2011 at 12:48 PM, Tapio Lehtonen
wrote:
Did not check BIOS for port settings, I supposed ports are enabled since
> dmesg and setserial show the port.
>
> root@phb:~# dmesg | grep -i tty
> [0.00] console [tty0] enabled
> [1.072850] serial8250: ttyS0 at I/O 0x3f8 (irq =
On Fri, 13 May 2011 16:00:45 +0800, Magicloud Magiclouds wrote:
> I'd like to try out gnome3.
Good luck :-P
> So I had a laptop for a installation of
> debian testing.
> Then I installed xorg from testing branch. With '# startx', I had
> the xterm window. But when I exited, the console turn
On Fri 13 May 2011 at 10:56:59 -0600, Paul E Condon wrote:
> I guess I'm a wimp. I can't find 'mini.iso' when I google 'mini.iso debian'.
> What is a URL that will lead me to it?
One place:
http://d-i.debian.org/daily-images/i386/daily/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.de
Michael Selinger wrote:
Hello,
I'm interested in trying out Debian's OS. I downloaded from your
website, which
took a half hour even with a high speed cable connection. I then sent
it on to my
E-drive, to burn it onto a disc. After 17 mins., I forced a
shutdown...log message
"Burn failed
From: peasth...@shaw.ca
Date: Fri, 13 May 2011 09:57:26 -0800
> May 13 08:56:14 dalton pppd[2046]: but I couldn't find any suitable secret
> (password) for it to use to do so.
>
> Previously, PPP would refer to /etc/passwd but seems to have forgotten that.
In setting up the fresh machine I pu
On Thu, 12 May 2011 22:35:39 +0530, Damu R wrote:
> I am having a HP EliteBook 6930p laptop with Intel Ultimate N WiFi Link
> 5300. Though the card supports master mode I am not able to set it to
> run in master mode. Is there anyway I can enable this mode?
(...)
Which driver/module are you usi
Paul E Condon wrote:
On 20110513_065059, Stan Hoeppner wrote:
On 5/13/2011 2:38 AM, Doug wrote:
According to some information on the various lists, you should *not* run
swap on
a SSD, because the SSD has a limited number of read/write cycles, and
swap uses
them up way too quickly.
That's pure
after rebooting, I am in big trouble now. I can't enter into the
system. so I can't remove the copied one.
nothing I can do, all those function keys can't enter the command line.
Hi,
when grub start go to line that end with "(recovery mode)"
Something like:
Debian GNU/Linux, with Linux 2.6.38
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 05/13/2011 06:40 PM, lina wrote:
> after rebooting, I am in big trouble now. I can't enter into the
> system. so I can't remove the copied one.
>
> nothing I can do, all those function keys can't enter the command line.
No cause for worry.
During
On Fri, 13 May 2011 12:49:01 -0400, Christopher Judd wrote:
> I sometime get error messages like the one below; it usually repeats.
> When this happens, I can not mount a usb thumb drive. The only way that
> I have found to correct this condition is to reboot. Does anyone have
> an idea as to w
On Friday 13 May 2011 15:07:26 Camaleón wrote:
> On Fri, 13 May 2011 12:49:01 -0400, Christopher Judd wrote:
> > I sometime get error messages like the one below; it usually repeats.
> > When this happens, I can not mount a usb thumb drive. The only way that
> > I have found to correct this condi
Hi,
As I recalled, I had learnt about this problem. Well, I forgot how
to resolve it
With Debian Testing branch, newly installed xorg, when startx, the
keyboard/mouse lost their function at all. By this I mean,
click/move/any key press does not work at all.
Any idea?
--
竹密岂妨流水过
山高哪阻野云飞
>> I am having a HP EliteBook 6930p laptop with Intel Ultimate N WiFi Link
>> 5300. Though the card supports master mode I am not able to set it to
>> run in master mode. Is there anyway I can enable this mode?
>
>(...)
>Which driver/module are you using?
I am using iwlagn driver. As per the wi
Bob McConnell:
>
> Before we go any further, lets get a couple of things sorted out.
> What type of SSD (Solid State Drive) are you all talking about here?
>
> If it contains Flash memory,
What else do you have in mind?
> then yes, there is a limit to the
> number of ERASE cycles each sector ca
After a recent upgrade, sound stopped working on my testing box.
For example, trying to play a .wav file, one would see the following:
bates@symplectic:$ play *.wav
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
play FAIL formats: can't open output file `default': snd_pcm_open
Am Freitag, 13. Mai 2011 schrieb Larry Bates:
> After a recent upgrade, sound stopped working on my testing box.
>
> For example, trying to play a .wav file, one would see the following:
>
> bates@symplectic:$ play *.wav
> ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
> play F
On 20110513_220818, Jochen Schulz wrote:
> Bob McConnell:
> >
> > Before we go any further, lets get a couple of things sorted out.
> > What type of SSD (Solid State Drive) are you all talking about here?
> >
> > If it contains Flash memory,
>
> What else do you have in mind?
>
> > then yes, th
On Friday 13 May 2011 18:00:14 Andrei Popescu wrote:
> On Vi, 13 mai 11, 07:44:23, Lisi wrote:
> > Once you have edited your sources list, you will need to update your apt
> > database with these repositories, but you will need to get rid of the
> > Squeeze data first, but I have never edited the a
Hello teddi...@tmo.blackberry.net,
Am 2011-05-11 12:43:29, hacktest Du folgendes herunter:
>
> I try to ignore threads like these, but here's a few thoughts...
>
> This list receives a good 100 messages any given day, and your complaining
> about a couple bogus messages that make it through?
>
Hello Camaleón,
Am 2011-05-11 20:30:49, hacktest Du folgendes herunter:
> As a rule of thumb I always *reply* to the list and *resend* to the list
> all the messages I receive, unless:
>
> 1/ I know beforehand the person is replying me and can easily see the
> user wants to go private.
1+
> 2
On Friday 13 May 2011 22:52:17 Michelle Konzack wrote:
> What are you talking about? You mail make no sense to me...
>
> Please learn to reply correctly
TeddyB's email is fine, and perfectly comprehensible. Presumably you find it
difficult because you are not a native speaker. (Incidentally, i
Magicloud Magiclouds, 14.05.2011 tarihinde şöyle yazmış:
> Hi,
> As I recalled, I had learnt about this problem. Well, I forgot how
> to resolve it
> With Debian Testing branch, newly installed xorg, when startx, the
> keyboard/mouse lost their function at all. By this I mean,
> click/move/
I tried to use reportbug to report a bug (wishlist) in approx. I
didn't succeed because first i got a segmentation fault and on second
try i got floating point exception. My computer is running Squeeze
i386 and so far as I know the installation is totally unexceptional
result of using businesscar
On 5/13/2011 1:34 PM, Bob McConnell wrote:
> Before we go any further, lets get a couple of things sorted out. What
> type of SSD (Solid State Drive) are you all talking about here?
>
> If it contains Flash memory, then yes, there is a limit to the number of
> ERASE cycles each sector can do. How
For hopefully my last remark on this thread, I urge that anybody's decision
(to whom to reply) err rather on the side of courtesy than on its dismissal.
Otherwise, for starters, your message will reduce to the power you feel in
being untrustworthy.
--
To UNSUBSCRIBE, email to debian-user-requ...
On 5/13/2011 4:21 PM, Paul E Condon wrote:
> This seems like hi-jacking my sub-thread. I asked a question of Stan
> Hoeppner because I was puzzled about the status of the technology
> behind the techy-buzzword SSD. The unstated purpose of asking was to
> get some clarity, for me, as to what he was
Dne, 14. 05. 2011 01:10:18 je Paul E Condon napisal(a):
I tried to use reportbug to report a bug (wishlist) in approx. I
didn't succeed because first i got a segmentation fault and on second
try i got floating point exception. My computer is running Squeeze
i386 and so far as I know the install
On Wed, May 11, 2011 at 06:41:24PM -0800, peasth...@shaw.ca wrote:
> From: Chris Davies
> Date: Wed, 11 May 2011 21:10:29 +0100
> > My favourite software SIP client is twinkle.
>
> Yes, Twinkle keeps configurations and contact lists in plain text
> and is economical with resources.
>
Twinkle i
Thanks all,
It works.
The Xorg.0.log.old is empty.
lina
On Sat, May 14, 2011 at 2:41 AM, Panayiotis Karabassis wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 05/13/2011 06:40 PM, lina wrote:
>> after rebooting, I am in big trouble now. I can't enter into the
>> system. so I ca
Hi,
I am experiencing major network problems after the upgrade.
Rebooting solves the problem for a short while - after 5
minutes, or so, network will be lost.
Based on searches in the internet I pasted below some info that
I understand might help to resolve the problem.
Please help.
Thanks,
It
I used this simple xorg.conf this time, it still showed me nothing.
Section "Device"
Identifier "ATI"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
the Xorg.0.log something like:
Kernel command line: BOOT_IMAGE=/vmli
Swift Linux 0.1.0 is now available at http://www.swiftlinux.org and based on
the new antiX Linux M11. There are two plain vanilla editions (Diet Swift
Linux and Regular Swift Linux) and four special editions (Taylor Swift Linux,
iCarly Swift Linux, Magnum P.I. Swift Linux, and NASCAR Swift Linu
On 20110513_192743, Stan Hoeppner wrote:
> On 5/13/2011 4:21 PM, Paul E Condon wrote:
>
> > This seems like hi-jacking my sub-thread. I asked a question of Stan
> > Hoeppner because I was puzzled about the status of the technology
> > behind the techy-buzzword SSD. The unstated purpose of asking w
One of my operating systems (a version of Debian Squeeze) is now
refusing to boot. It just shows a black screen with the 2 words GRUB
GRUB in the top left hand corner. I wonder if anyone has seen this
sort of behaviour before?
More background: I have multiple operating systems on my PC which can
b
Question 1 ) How I can get know about the hardware configuration ? Is there
any method which can list down my hardware (not all) for which i am suppose
to install proprietary drivers.. In ubuntu, it displayed ATI/AMD FGLRX kind
of thing which got automatically installed. Ubuntu automatically make w
On Fri, 13 May 2011 17:10:18 -0600, Paul E Condon wrote:
> I tried to use reportbug to report a bug (wishlist) in approx. I didn't
> succeed because first i got a segmentation fault and on second try i got
> floating point exception. My computer is running Squeeze i386 and so
> far as I know the
82 matches
Mail list logo
