At what point is a system beyond repair... or not worth repairing?
PROLOG
---
I had some problems installing debhelper and the result is
I had disk errors--which I managed to fix with "fsck.reiserfs"
I then managed to regenerate "/var/lib/dpkg/available"
(which fixed an earlier problem --
http://
We are using Debian for a linux installation, .. yet there is
NO need to setup a Server and all that
jazz. The only instructions or "How to" guides we have instruct
building a server, networking, etc. [b:47e5d03b6f]All we want is a
Regular WORKSTATION setup.[/b:47e5d03b6f] word processing,
grap
I'm new to this list (and to debian) so please forgive me if this is
not the correct place for this question.
I'm trying to apt-get install cfs on a server i rent from uk2net. the
apt get fails when i'm installing it with the following error:
# apt-get install cfs
Reading Package Lists... Don
Hello
(please don't top post)
Joseph (<[EMAIL PROTECTED]>) wrote:
>>> I must have don't some configuration incorrectly as I can not read
>>> any fonts on the screen.
>>> Ctrl+Alt+1 is showing the same unreadable fonts.
>>
>> F1 gets you from X Window to the console. F7
>> gets you back to X.
>
I was unable to figure out the right combination from the ippl.conf
man page to show me just what all the bytes streaming into my modem
were from, and nothing else.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On (06/03/04 08:29), [EMAIL PROTECTED] wrote:
> We are using Debian for a linux installation, .. yet there is
> NO need to setup a Server and all that
> jazz. The only instructions or "How to" guides we have instruct
> building a server, networking, etc. [b:47e5d03b6f]All we want is a
> Regular WOR
Nick Jacobs wrote:
--- Paul E Condon <[EMAIL PROTECTED]> wrote:
1) Look at http://www.debian.org/doc/
2) The competition at debian.org pretty much kills
the dead tree book market, IMHO.
I agree with (1) but not with (2).
Firstly, I'd pay to get some of the material on
http://www.debian.org/doc/
I suggest create the module kernel-image.last
To upgrade the kernel to the last version.
In apt-get install -kernel last
the apt-get would install the last kernel image for the default system
architecture (i.e. I would detect if it's a i386X architecture and would
download the last kernel modu
Hello Pedro!
On Sat, Mar 06, 2004 at 12:04:34PM +, Pedro M. wrote:
> I suggest create the module kernel-image.last
>
> To upgrade the kernel to the last version.
>
> In apt-get install -kernel last
|$ apt-cache show kernel-image-2.4-386
|[...]
|Description: Linux kernel image for version 2.
Where is the option for usb scanner when compiling your kernel? It
seems that it was forgotten. Yesterday I found out that to use the
scanner I had to boot with the 2.4.22 image, now I am trying to
recompile the image 2.6.3 to add scanner support but I can find only
for microtek, and no generic as
I have had problems using the NVidia Install ever since XFree upgraded
to v4.3.x in unstable. I have tried every combination of tips I have
googled to get the NVidia Installer to work with no success. Now I have
a working system using the debian packages of the nvidia install.
I am using debi
[EMAIL PROTECTED] wrote:
We are using Debian for a linux installation, .. yet there is
NO need to setup a Server and all that
jazz. The only instructions or "How to" guides we have instruct
building a server, networking, etc. [b:47e5d03b6f]All we want is a
Regular WORKSTATION setup.[/b:47e5d03
Hello Debian folks
Installing Debian 3.0r2
I get stuck in xf86config specifying the videoCard.
mainboard ASUS CUSI-FX
SiS 630E AGPset
SiS300 AGP graphics controller
As I read in postings I should choose xserver-sis,
but can't find the right place for doing so.
Both files are present:
/usr/X11R6
ts wrote:
>> Kent West wrote:
>>
ts wrote:
>At first I ventured into debian installation ( via networking)again,
>the embeded LAN chips(RTL8201BL , RTL8101L) of current EPOX-8RDA3G motherboard
>(nforce2 Ultra 400 +MCP chipsets) can't be detected whatever kernel driver
On Fri, Mar 05, 2004 at 11:28:37PM -0800 or thereabouts, Nick Jacobs wrote:
>
> --- Paul E Condon <[EMAIL PROTECTED]> wrote:
>
> > 1) Look at http://www.debian.org/doc/
> > 2) The competition at debian.org pretty much kills
> > the dead tree book market, IMHO.
>
> I agree with (1) but not with (
You are right on. Once I used MAKEDEV I created the three device files for
my RAID array. However I cannot create the /dev/hdm and /dev/hdm device
files. I know I need to use mknod, but I cannot find the major and minor
numbers I need. The whacky version of Debian I used was called Libranet and
You are correct. Thanks. However I am now working on creating /dev/hd0 and
/dev/hdm (MAKEDEV only goes so far up the alphabet). I think mknod is the
answer.
Greg
> -Original Message-
> From: Jamin W. Collins [mailto:[EMAIL PROTECTED]
> Sent: Saturday, March 06, 2004 1:43 AM
> To: [EMAI
Hi all,
I'm going to buy a new computer and I was wondering if there is any
support in the kernel for the new SATA controllers. I'm thinking in
acquiring an Asus P4P8X motherboard with an Intel ICH5 SATA Chipset.
Anyone has experience with this kind of hardware? Does the SATA
technology really tur
I'm still looking for a MUA that I really like. So far, I've tried
KMail, Mozilla Mail and sylpheed-claws.
KMail is right out because it is a pain to get proper GPG handling with
the Aegypten plugins which don't seem to be in debian.
sylpheed-claws is much better but the debian packages are sever
Bonjour,
Lorsque je vais dans le centre de configuration de KDE :
Son & Multimedia -> Notifications du systeme
J'ai un crash de l'appli.
Au lancement du centre de conf., j'ai ce message :
KThemeStyle cache seems corrupt!
Quand je vais dans Notification du systeme la j'ai :
could you tell me how to get my computer off of safe mode you see how little everything is
On Sat, Mar 06, 2004 at 04:35:33PM +0100 or thereabouts, Nicos Gollan wrote:
> I don't like Mozilla mail for *some* reason, it's personal ;-)
Sorry, can't help with your Evolution problem, but have you tried out
Thunderbird? It's based on the Mozilla client, (it only contains the
capbility for
Hi
I have a problem with my machine. If I leave it for some time it seems
that it starts "sleeping" so that neither cron-jobs work nor shutdown
-h
Example: I sat today up a cronjob to start at 15:00. I went at 14:20 and
I came back at 16:12. The machine was locked with xscreensaver. When I
got ba
On Sat, Mar 06, 2004 at 03:03:39PM +, Paulo Silva wrote:
| Hi all,
|
| I'm going to buy a new computer and I was wondering if there is any
| support in the kernel for the new SATA controllers. I'm thinking in
| acquiring an Asus P4P8X motherboard with an Intel ICH5 SATA Chipset.
Supposedly it
Florian Ernst escribió:
Hello Pedro!
On Sat, Mar 06, 2004 at 12:04:34PM +, Pedro M. wrote:
I suggest create the module kernel-image.last
To upgrade the kernel to the last version.
In apt-get install -kernel last
|$ apt-cache show kernel-image-2.4-386
|[...]
|Description: Linux kerne
I run a sarge system using standard kernel-image-k7 and alsa modules. I
have an Audigy sound card which uses the emu10k1 driver. Since moving
to 2.4.24 i get no sound but can't find any error messages anywhere. If
I revert to 2.4.22 everything works OK. Haven't been able to find
anything on
>Date: Fri, 05 Mar 2004 10:55:59 -0600
>From: Kent West <[EMAIL PROTECTED]>
>To: debian-user <[EMAIL PROTECTED]>
>Subject: Re: base system, no x windows yet,HOW?
>Message-id: <[EMAIL PROTECTED]>
>References: <[EMAIL PROTECTED]>
>In-reply-to: <[EMAIL PROTECTED]>
>Content-type: text/plain; charset=us
Bought a VCD, where I am only interested in the sound.
I can play it (xine), but have no good clue how to rip the audio only; to
MP3 on debian.
I tried google, without much success. Also apt-cache search didn't come up
with a convincing entry.
Any idea appreciated !
--
To UNSUBSCRIBE, email to
Your email was not delivered because The attachment(s) your_document.pif sent to "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> was of a type that could not be verified as being safe. Please contact [EMAIL PROTECTED] to arrange for delivery of this attachment type.
s. keeling wrote:
Incoming from Joseph:
How to configure X in Debian.
lists.debian.org is your friend. I _think_ the answer is
"dpkg-reconfigure xfree86", but check that.
I must have don't some configuration incorrectly as I can not read any
fonts on the screen.
Ctrl+Alt+1 is showing
On Sat, Mar 06, 2004 at 03:03:39PM +, Paulo Silva wrote:
| Hi all,
|
| I'm going to buy a new computer and I was wondering if there is any
| support in the kernel for the new SATA controllers. I'm thinking in
| acquiring an Asus P4P8X motherboard with an Intel ICH5 SATA Chipset.
Supposedly it s
Original Message
Subject:Re: rip VCD audio
Date: Sat, 06 Mar 2004 18:33:39 +0100
From: steef <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Organization: zeta
To: Uwe Dippel <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Uwe Dippel wrote:
Bou
On Sat, 2004-03-06 at 09:51, Greg wrote:
> You are right on. Once I used MAKEDEV I created the three device files for
> my RAID array. However I cannot create the /dev/hdm and /dev/hdm device
> files. I know I need to use mknod, but I cannot find the major and minor
> numbers I need. The whacky
On Fri, Mar 05, 2004 at 12:00:34PM +0100, [EMAIL PROTECTED] wrote:
> Hi all.
> I have problems loading the Alsa drivers in kernel 2.6.3 on my debian testing box.
> I get the following error:
> Starting ALSA (unknown version): failed - ALSA modules not installed
> I know i compiled them as modules.
Dear Mr.Kent West,
>ts wrote:
>
>>> Kent West wrote:
>>>
>ts wrote:
>
>>At first I ventured into debian installation ( via networking)again,
>>the embeded LAN chips(RTL8201BL , RTL8101L) of current EPOX-8RDA3G
>>motherboard (nforce2 Ultra 400 +MCP chipsets) can't be det
Should also have said that this applies both in KDE and using mpg123.
Tony Middleton wrote:
I run a sarge system using standard kernel-image-k7 and alsa modules. I
have an Audigy sound card which uses the emu10k1 driver. Since moving
to 2.4.24 i get no sound but can't find any error messages a
Try Thunderbird. If you add the enigmail plugin you get good gpg
support and can have s/mime as well.
Regards
Tony Middleton
Nicos Gollan wrote:
I'm still looking for a MUA that I really like. So far, I've tried
KMail, Mozilla Mail and sylpheed-claws.
KMail is right out because it is a pain to
A. F. Cano wrote:
Hello all,
The quick version: what's the best way to create pdf documents under
woody (3.0 r2)?
But how do you modify pdf documents under woody, specifically the IRS
pdf documents?
What I do now is:
pstoedit -f fig: %d.fig
Edit with xfig.
Then export with border margin = 2
On Sat, Mar 06, 2004 at 07:19:19PM +0800, Katipo wrote:
> Nick Jacobs wrote:
> >--- Paul E Condon <[EMAIL PROTECTED]> wrote:
> >
> >
> >>1) Look at http://www.debian.org/doc/
> >>2) The competition at debian.org pretty much kills
> >>the dead tree book market, IMHO.
> >
> >
> >I agree with (1) but
Hello Pedro!
On Sat, Mar 06, 2004 at 05:32:44PM +, Pedro M. wrote:
> Florian Ernst escribió:
> >On Sat, Mar 06, 2004 at 12:04:34PM +, Pedro M. wrote:
> >>I suggest create the module kernel-image.last
> >>
> >>To upgrade the kernel to the last version.
> >>
> >>In apt-get install -kernel la
Ken Bloom <[EMAIL PROTECTED]> writes:
> I've observed on my machine over the last several months that it
> takes an inordinately long time after I log off of one of my
> machine's virtual consoles before the getty restarts, prints
> /etc/issue and is ready to accept logins again. Occasionally, I g
Hello,
> * Is there some way I can access the laptop HD (2.5" I think,
> don't remember exact specs) ... I need is some hardware so
> that I can mount the HD under linux, and I can take care of
> the rest. (Perferably USB, I'm not familiar with firewire; though
> if I have to
Marty Landman <[EMAIL PROTECTED]> writes:
>
> so I could've just done
>
> %ifdown -a && ifup -a
Yes, that would work. In fact, "ifdown eth0 && ifup eth0" would just
restart the specific interface. The "-a" flag just means all
interfaces flagged with "auto" in "/etc/network/interfaces".
> A fast
受感染附件的收件人：ljf[李俊峰]\收件箱
消息主题：trust me
已隔离了一个或多个附件。
由于下列原因，附件 your_stuff.zip 被隔离：
发现病毒 [EMAIL PROTECTED]
在 your_stuff.txt.scr 中发现病毒 [EMAIL PROTECTED]
<>
Marty Landman <[EMAIL PROTECTED]> writes:
>
> woody:~# more /var/log/kern.log | grep eth0
> Mar 4 09:11:41 woody kernel: eth0: Lite-On 82c168 PNIC rev 33 at
> 0xe400, 00:A0:CC:40:3E:9B, IRQ 11.
[ . . . ]
Oh, I see you found the logs.
Well, obviously the driver didn't write anything relevant to
On Sat, Mar 06, 2004 at 09:05:08AM -0500, Antonio Rodriguez wrote:
> Where is the option for usb scanner when compiling your kernel? It
> seems that it was forgotten. Yesterday I found out that to use the
> scanner I had to boot with the 2.4.22 image, now I am trying to
> recompile the image 2.6.3
On Saturday 06 March 2004 9:35 am, Nicos Gollan wrote:
> I'm still looking for a MUA that I really like. So far, I've tried
> KMail, Mozilla Mail and sylpheed-claws.
>
> KMail is right out because it is a pain to get proper GPG handling with
> the Aegypten plugins which don't seem to be in debian.
On Saturday 06 March 2004 1:28 am, Nick Jacobs wrote:
> Firstly, I'd pay to get some of the material on
> http://www.debian.org/doc/ in the form of a printed,
> bound book; a book is more convenient to read and
> tires the eyes less.
Hehe, thats one reason why I have a laserprinter and a three-hol
I cannot MAKEDEV hmo. I get a "/sbin/MAKEDEV:don't know how to make device
"hmo" Would mknod help here ? I am at the fringes of my Linux knowledge,
so I am learning as I go along. On my Sunblade 100 running Debian Woody as
well as another box running Debian I get the same message. Is there a l
At 02:11 PM 3/6/2004, Kevin Buhr wrote:
Oh, I see you found the logs.
Yes, except your explanation of the relationship between kernel and syslog
is most welcome and educational so thanks, just finished reading it.
BTW am I left to writing my own script if I wanted to grep the syslog for a
certa
On Sun, Mar 07, 2004 at 12:59:48AM +0800, Uwe Dippel wrote:
> Bought a VCD, where I am only interested in the sound.
> I can play it (xine), but have no good clue how to rip the audio only; to
> MP3 on debian.
If you can't find a better alternative, vsound would work.
--
Carl Fink [E
Hello,
I am using a mixture of Stable/Unstable
with kernel 2.6.2 and ALSA support enabled.
Two soundcards SBLive and Delta M-66
The SBLive plays fine. I can use Envy24control
and get sound from the Delta M-66. So, both
soundcards work with ALSA.
When I try to use ecasound2.2 I get the followi
I am running 'woody' with the 4.1.0-16woody1 version of XFree86 on a
fairly new Dell with a "ATI Radeon RV200 QW [Radeon 7500]" video
controller.
For some reason, the board isn't being recognized when I 'startx'.
In particular, this:
(II) ATI unknown chipset (0x5157)
and this:
(WW) ATI
Hallo,
>For some reason, the board isn't being recognized when I 'startx'.
>In particular, this:
>
>(II) ATI unknown chipset (0x5157)
>
>and this:
>
>(WW) ATI: PCI/AGP Mach64 in slot 1:0:0 could not be detected
You could ease up error detection by providing the complete /var/log/
XFree86.
Philippe Marzouk wrote:
On Sat, Mar 06, 2004 at 09:05:08AM -0500, Antonio Rodriguez wrote:
Where is the option for usb scanner when compiling your kernel? It
seems that it was forgotten. Yesterday I found out that to use the
scanner I had to boot with the 2.4.22 image, now I am trying to
recomp
Here's what I show now, with a 6GB hd on my Woody box:
woody:~# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda1 1035660327876655176 34% /
woody:~# more /etc/fstab
# /etc/fstab: static file system information.
#
#
/dev/hd
Tony Middleton wrote:
I run a sarge system using standard kernel-image-k7 and alsa modules.
I have an Audigy sound card which uses the emu10k1 driver. Since
moving to 2.4.24 i get no sound but can't find any error messages
anywhere. If I revert to 2.4.22 everything works OK. Haven't been
a
Nicos Gollan wrote:
I'm still looking for a MUA that I really like. So far, I've tried
KMail, Mozilla Mail and sylpheed-claws.
apt-get install mozilla-thunderbird.
I just switched from sylpheed-claws, which I really liked, but you're
right, - too buggy. Past versions have actually been better.
I d
On Fri, Mar 05, 2004 at 11:28:37PM -0800, Nick Jacobs wrote:
> --- Paul E Condon <[EMAIL PROTECTED]> wrote:
>
> > 1) Look at http://www.debian.org/doc/
> > 2) The competition at debian.org pretty much kills
> > the dead tree book market, IMHO.
>
> I agree with (1) but not with (2).
> Firstly, I'd
js> You could ease up error detection by providing the complete /var/log/
js> XFree86.0.log and /etc/X11/XF86Config(-4).
Good idea!
The files are attached below. I manually edited XF86Config-4 some, so
I hope it isn't in too bad of shape! ;-)
> /lib/modules/2.4.18-bf2.4/kernel/drivers
On Sun, 07 Mar 2004 00:59 +0800, Uwe Dippel wrote:
> Bought a VCD, where I am only interested in the sound.
> I can play it (xine), but have no good clue how to rip the audio only; to
> MP3 on debian.
> I tried google, without much success. Also apt-cache search didn't come up
> with a convincing
Hallo,
>So this looks like other than the first GB on my hard drive I've screwed up
>the rest of it. What should I do at this point to get use of the rest of
>the space on my hd? I don't care about any data anywhere except for /dev/
hda1.
different options:
1) mount the other filesystems somwhe
On Sat, Mar 06, 2004 at 09:32:48PM +0100, Kenneth Macdonald Karlsen wrote:
> Philippe Marzouk wrote:
>
> >On Sat, Mar 06, 2004 at 09:05:08AM -0500, Antonio Rodriguez wrote:
> >
> >
> >>Where is the option for usb scanner when compiling your kernel? It
> >>seems that it was forgotten. Yesterday I
Hallo,
> js> You could ease up error detection by providing the complete /var/log/
> js> XFree86.0.log and /etc/X11/XF86Config(-4).
>
>Good idea!
>
>The files are attached below. I manually edited XF86Config-4 some, so
>I hope it isn't in too bad of shape! ;-)
I'm not a XFree professional, but
Hello all,
I'm having a very mysterious connectivity issue with one of my new
debian boxes, and was wondering if anyone has see this sort of problem
before...
The long and the short of the problem is that this machine goes 'dead
to the world' randomly... Can't SSH to it, can't POP, can't
On Sat, 2004-03-06 at 01:48, Andreas Janssen wrote:
> Hello
>
> (please don't top post)
I hope I didn't top post this time.
[snip]
> Kind of dificult to edit the file if you can't read the letters on the
> screen. It is somehow possible to make lilo ask you (I think some key
> combination was n
I'm trying to mount and access floppy, it would seem so simple (as
instructions are everywhere) but I still have a problem and the worse is
I don't know why it is not working.
My /etc/fstab has entry:
/dev/fd0 /mnt/floppy msdos defaults 1 2
I've tried as well:
/dev/fd0 /mnt/floppy vfat user,noaut
There's never a good reason to mount a floppy IMO. Just use the
mtools.
--
Carl Fink [EMAIL PROTECTED]
Jabootu's Minister of Proofreading
http://www.jabootu.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello all,
I'm using Sylpheed-0.9.7 on Sarge. Before posting I did do some googling, but
of no luck.
How do we decrypt an encrypted email message in Sylpheed. I mean, there's no option I
see that asks for "Enter your passphrase".
rrs
- --
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 11:47 am, Kenneth Jacker wrote:
> js> You could ease up error detection by providing the complete
> /var/log/ js> XFree86.0.log and /etc/X11/XF86Config(-4).
>
> Good idea!
>
> The files are attached below. I manually edited
Nathan Malmberg wrote:
On Fri, Mar 05, 2004 at 12:00:34PM +0100, [EMAIL PROTECTED] wrote:
Hi all.
I have problems loading the Alsa drivers in kernel 2.6.3 on my debian testing box.
I get the following error:
Starting ALSA (unknown version): failed - ALSA modules not installed
I know i compiled
On Sun, Feb 29, 2004 at 05:37:28PM -0800, Ross Boylan wrote:
> I just built a custom kernel and modules, and got a bunch of errors
> about unresolved symbols errors from depmod:
>
> # dpkg -i alsa-modules-2.4.24advncdfs_1.0.2c-2+rb.2_i386.deb
> i2c-2.4.24advncdfs_2.8.1-1+rb.2_i386.deb
> lm-senso
I have no problem recieving debian-user.
As of 2 months ago, I have been unable to send email
to debian-user. I am using an alternate account to see
if this account works. my friend said that
mail.pipeline.com may be the problem. It may be on an
RBL. It may be because it uses round-robin. Any info
Kevin Mark wrote:
I have no problem recieving debian-user.
As of 2 months ago, I have been unable to send email
to debian-user. I am using an alternate account to see
if this account works. my friend said that
mail.pipeline.com may be the problem. It may be on an
RBL. It may be because it uses roun
Changed command to
ecasound -i alsa,default -o test.mp3
and now I can record and playback.
Lance
>
> Hello,
>
> I am using a mixture of Stable/Unstable
> with kernel 2.6.2 and ALSA support enabled.
>
> Two soundcards SBLive and Delta M-66
>
> The SBLive plays fine. I can use Envy24co
What am I not getting?
http://slashdot.org/article.pl?sid=04/03/06/1436223&mode=nested
http://www.ati.com/support/drivers/linux/radeon-linux.html
The release date for 3.7.0 on the ATI site is 3/2/04.
But the fglrx-4.3.0-*_3.7.0-3_i386.deb .debs I downloaded from:
http://xoomer.virgilio.it/flavi
On Sat, Mar 06, 2004 at 02:21:32PM -0800, Number Six wrote:
> Why does ATI claim they are just now released, and what does Slashdot
> think so as well?
Oh, and the upshot of the Slashdot post is these are the first OFFICIAL
ATI drivers for XFree 4.3.0 --- but that's not true. I swear my memory
Florian Ernst escribió:
Hello Pedro!
On Sat, Mar 06, 2004 at 05:32:44PM +, Pedro M. wrote:
Florian Ernst escribió:
On Sat, Mar 06, 2004 at 12:04:34PM +, Pedro M. wrote:
I suggest create the module kernel-image.last
To upgrade the kernel to the last version.
In apt-get ins
On Sat, Mar 06, 2004 at 05:38:52PM -0500, Nick Lidakis wrote:
> Number Six wrote:
> >Why does ATI claim they are just now released, and what does Slashdot
> >think so as well?
> >
Thanks for the excellent information, adding the list back in as they
would also like to know. One thing I just not
On Sat, Mar 06, 2004 at 03:03:58PM -0800, Number Six wrote:
> I'm pretty sure "xv" used to work on my 9700 but now I've switched to a
> 9800XT. I'll probably have to search the forums for spomething this
> specific but do you have any insight about xv support? in 9800? in the
> latest drivers
On Thu, 26 Feb 2004, Faheem Mitha wrote:
>
> Dear People,
>
> I just started a job at Duke. I've been told to put together a machine
> quote for my office. I want to run Debian on it. I tried to persuade my
> employer to use Monarch, but was told I have to use Dell.
>
> I'm not sure of the best
--- Begin Message ---
Number Six wrote:
What am I not getting?
http://slashdot.org/article.pl?sid=04/03/06/1436223&mode=nested
http://www.ati.com/support/drivers/linux/radeon-linux.html
The release date for 3.7.0 on the ATI site is 3/2/04.
But the fglrx-4.3.0-*_3.7.0-3_i386.deb .debs I download
Dear Customer,
Thank you for writing to us. This auto-acknowledgement confirms the receipt of your
email.
If you have raised a query, we will get back to you shortly. If you are an existing
customer, and have not mentioned your Customer Identification Number or account number
in your e-mail,
Number Six wrote:
On Sat, Mar 06, 2004 at 05:38:52PM -0500, Nick Lidakis wrote:
Thanks for the excellent information, adding the list back in as they
would also like to know. One thing I just noticed is mplayer is using
the "x11" -vo device even though in debconf I specified "xv".
My Mpl
I've recently upgraded to KDE 3.2 (I'm running sid); after applications like
mozilla-firefox have huge menu fonts if I run them from KDE. If I run from
KDE gnome-font-properties, then all the gtk2 apps get the right font size for
the menus.
Anybody got the same problem?
Regards,
Toshiro.
Nue
It seems that since the beginning of time, Xemacs never performed
syntax highlightin automatically when a file is loaded. On one of my
machines, however, it is now doing just that. I have always had
syntax highlighting in my initialization file.
Does anyone know what I did right on that machine?
On Sat, 2004-03-06 at 14:24, Greg wrote:
> I cannot MAKEDEV hmo. I get a "/sbin/MAKEDEV:don't know how to make device
> "hmo" Would mknod help here ? I am at the fringes of my Linux knowledge,
> so I am learning as I go along. On my Sunblade 100 running Debian Woody as
> well as another box run
Hello Pedro!
On Sat, Mar 06, 2004 at 11:49:47PM +, Pedro M. wrote:
> Florian Ernst escribió:
> >|[EMAIL PROTECTED]:~$ apt-cache search kernel-image-2.4- | wc -l
> >|7
> >
> >Not that much, at least in my eyes. YMMV.
> >
> try apt-cache search kernel-image* ;)
Yes, certainly, but that's someth
Florian Ernst escribió:
Hello Pedro!
On Sat, Mar 06, 2004 at 11:49:47PM +, Pedro M. wrote:
Florian Ernst escribió:
|[EMAIL PROTECTED]:~$ apt-cache search kernel-image-2.4- | wc -l
|7
Not that much, at least in my eyes. YMMV.
try apt-cache search kernel-image* ;)
Yes, cert
On Sat, Mar 06, 2004 at 02:21:32PM -0800, Number Six wrote:
>> Why does ATI claim they are just now released, and what does Slashdot
>> think so as well?
Oh, and the upshot of the Slashdot post is these are the first OFFICIAL
ATI drivers for XFree 4.3.0 --- but that's not true. I swear my memory
Good catch, but the mistake was in the email. I did type MAKEDEV hdo and
MAKEDEV hdm on my pc and still no joy .. I really *wish* I had just typed a
typo ...
I *think* that linux has a limit of 255 devices and perhaps I have reached
my limit. I will try deleting some of them and see.
Greg
> --
On Sat, Mar 06, 2004 at 07:22:14PM -0500, Greg wrote:
> Good catch, but the mistake was in the email. I did type MAKEDEV hdo and
> MAKEDEV hdm on my pc and still no joy .. I really *wish* I had just typed a
> typo ...
>
> I *think* that linux has a limit of 255 devices and perhaps I have reached
Hello Pedro!
On Sun, Mar 07, 2004 at 01:12:36AM +, Pedro M. wrote:
> Florian Ernst escribió:
> >This exists already for kernel patchlevels, just as mentioned above.
> >
> >You want to extend this to minor and major kernel versions, which I
> >think is risky and a misfeature.
> >
> minor+minor+
On Sat, Mar 06, 2004 at 02:25:23PM -0700, Joseph wrote:
> I'm trying to mount and access floppy, it would seem so simple (as
> instructions are everywhere) but I still have a problem and the worse is
> I don't know why it is not working.
>
> My /etc/fstab has entry:
> /dev/fd0 /mnt/floppy msdos de
On Fri, 2004-03-05 at 08:10, Karol Czachorowski wrote:
> On Thu, 4 Mar 2004 18:33:36 -0800
> Paul Johnson <[EMAIL PROTECTED]> wrote:
>
> > Unless you're doing something CPU intensive that can take advantage of
> > special CPU instructions, you will waste hours upon hours recompiling
> > the world
> I get a mess a message:
> mount: wrong fs type, bad options, bad superblock on /dev/fd0
Three options spring to my mind,
1) You've problems with autoloading the vfat/fat driver module or not compiled
it at all. Try loading vfat prior to mounting the floppy.
2) Your disk is not vfat (or regular
Hello,
Apologies if not closely related to mailing list; not sure where else to ask
for help -- need some help w/ Hardware
I've used both Gentoo (yay emerge!) & Debian (yay apt-get!) at one time or
another; I hope you'll not flame me for my somewhat offtopic post on account
of that.
If you respo
TongKe Xue <[EMAIL PROTECTED]> writes:
>
> * Is there some way I can access the laptop HD (2.5" I think,
> don't remember exact specs) ... I need is some hardware so
> that I can mount the HD under linux, and I can take care of
> the rest. (Perferably USB, I'm not familiar with
Thanks ! I had just looked at man MAKEDEV (if all else fails look at the
instructions !) and noticed that MAKEDEV will only make devices from hda to
hdl - which would put a serious dent in my fileserver building efforts.
Once again, thanks.
Greg
> -Original Message-
> From: Colin Watson
http://www.sunbeamtech.com/new/products/el/el%20series-el%20badge.htm
Frys carries the Sunbeam tech "EL-Case badge" case light products.
They do not carry the Osama Bin Laden logo, but you can see it on the
back of the "ordinary" images as a choice.
I compained to Frys to at least modify the pac
1 - 100 of 123 matches
Mail list logo
