Hi,
Debian Wheeze onwards comes with a default installation of Dovecot 2. An
upgrade from Squeeze to Wheezy would upgrade Dovecot 1.2 -> 2.2.
When I upgrade a Squeeze server to Wheezy, how could I keep Dovecot 1.2? Could
I by Pinning the package?
Many thanks, Soph.
P.S I have pos
On Wed, Jul 15, 2015 at 7:01 PM, Martin G. McCormick
wrote:
> Javier Barroso writes:
>> There is a page on the wiki [1] where give you details about cs4236
>> devices on Debian (and why they were excluded from Distribution. I'm
>> not sure if cs4236B is included. I hope it work too,
>
> I
Javier Barroso writes:
> There is a page on the wiki [1] where give you details about cs4236
> devices on Debian (and why they were excluded from Distribution. I'm
> not sure if cs4236B is included. I hope it work too,
I looked there and didn't see any documentation stating
that the 423X s
Dan Ritter writes:
> A cheap USB audio device is probably a good bet. For example,
>
> http://www.newegg.com/Product/Product.aspx?Item=N82E16812186035&cm_re=usb_audio-_-12-186-035-_-Product
>
> is an $8 USB device that I can verify works with Debian and Mac
> OS X.
That is a very good suggestion
Hello, keeping you on cc, sorry if you don't want,
On Tue, Jul 14, 2015 at 5:49 PM, Martin G. McCormick
wrote:
> The system in question is a Dell Dimension 600-MHZ
> Pentium from way back in 2000. The BIOS date is October 10 of
> 1999. The sound chip set is a CS4236 on the mother board an
On Tue, Jul 14, 2015 at 10:49:25AM -0500, Martin G. McCormick wrote:
> This old Dell is not ready for the recycling center as
> it has a gigabyte of RAM and can still do lots of useful work so
> I hope there is a way to get audio working again.
A cheap USB audio device is probably a good bet
The system in question is a Dell Dimension 600-MHZ
Pentium from way back in 2000. The BIOS date is October 10 of
1999. The sound chip set is a CS4236 on the mother board and
it's always been touchy about working. You can count on the
sound dying after any significant upgrade but once you ge
Bernhard Frühmesser wrote:
> First the service xdm is now started long before other services (like dhcp,
> clamd, dansguardian...) are started.
> Before the upgrade xdm was the last service that was started which was ok.
Sounds like you are now using the parallel boot whereas before it was
the ser
On Mi, 10 dec 14, 16:19:12, Bernhard Frühmesser wrote:
> Hi,
>
> After upgrading from Sqeeze to Wheezy i have two problems with starting up
> services while booting.
>
> First the service xdm is now started long before other services (like dhcp,
> clamd, dansguardian...) are started.
And why is
Hi,
After upgrading from Sqeeze to Wheezy i have two problems with starting
up services while booting.
First the service xdm is now started long before other services (like
dhcp, clamd, dansguardian...) are started.
Before the upgrade xdm was the last service that was started which was ok.
On 20130725_133320, Thierry Chatelet wrote:
> The Friday 19 July 2013 14:17:05, Thierry Chatelet wrote :
> > Hi list,
> > I upgraded my daughter laptop from squeeze to wheezy. It was working fine
> > under squeeze. Now it's overheating, and it shuts down after about 5
> > minutes.If I run it with
The Friday 19 July 2013 14:17:05, Thierry Chatelet wrote :
> Hi list,
> I upgraded my daughter laptop from squeeze to wheezy. It was working fine
> under squeeze. Now it's overheating, and it shuts down after about 5
> minutes.If I run it with a squeeze live CD everything is OK. I look with
> goog
On Fri 19 Jul 2013 at 15:44:12 +0200, Thierry Chatelet wrote:
> Was not installed, I installed it.
> /proc/cpuinfo show gives permission denied, even when I am root
> Now what will cpufrequtils do?
Advocates and prospective users of cpufrequtils may benefit from reading
the threads starting a
On Fri, 2013-07-19 at 15:44 +0200, Thierry Chatelet wrote:
> Now what will cpufrequtils do?
CPU frequency scaling. If your computer rests and the CPU governor is
set to "performance", than the CPU anyway will be used at maximal clock.
If it's set to another governor e.g. "ondemand", than the CPU w
On Fri, Jul 19, 2013 at 02:44:12PM +0100, Thierry Chatelet wrote:
> The Friday 19 July 2013 14:47:08, Virgo Pärna wrote :
> > On Fri, 19 Jul 2013 14:17:05 +0200, Thierry Chatelet
> wrote:
> > > I upgraded my daughter laptop from squeeze to wheezy. It was working
> > > fine
> > >
> > > under sq
The Friday 19 July 2013 14:47:08, Virgo Pärna wrote :
> On Fri, 19 Jul 2013 14:17:05 +0200, Thierry Chatelet
wrote:
> > I upgraded my daughter laptop from squeeze to wheezy. It was working
> > fine
> >
> > under squeeze. Now it's overheating, and it shuts down after about 5
>
> Is cpufreq
On Fri, 19 Jul 2013 14:17:05 +0200, Thierry Chatelet wrote:
> I upgraded my daughter laptop from squeeze to wheezy. It was working fine
> under squeeze. Now it's overheating, and it shuts down after about 5
>
Is cpufrequtils installed? What does /proc/cpuinfo show?
--
Virgo Pärna
virgo.
The Friday 19 July 2013 14:17:05, Thierry Chatelet wrote :
> Hi list,
> I upgraded my daughter laptop from squeeze to wheezy. It was working fine
> under squeeze. Now it's overheating, and it shuts down after about 5
> minutes.If I run it with a squeeze live CD everything is OK. I look with
> goog
Hi list,
I upgraded my daughter laptop from squeeze to wheezy. It was working fine
under squeeze. Now it's overheating, and it shuts down after about 5
minutes.If I run it with a squeeze live CD everything is OK. I look with
google and I found overheat problems with wheezy, but only after hiber
Your suggestion WORKED!
I was able to remove enough of the NVIDIA cruft so that apt-get would
install gdm3. My desktop environment is now working, thanks to your
suggestion.
THANK YOU!
--
View this message in context:
http://debian.2.n7.nabble.com/gdm-broken-after-upgrade-from-squeeze-to
E: Sub-process /usr/bin/dpkg returned an error code (1)
--
View this message in context:
http://debian.2.n7.nabble.com/gdm-broken-after-upgrade-from-squeeze-to-wheezy-tp2970296p2970450.html
Sent from the Debian User mailing list archive at Nabble.com.
Hi,
I found a similar bug-report here:
:
http://debian.2.n7.nabble.com/gdm-broken-after-upgrade-from-squeeze-to-wheezy-tp2970296p2970458.html
Sent from the Debian User mailing list archive at Nabble.com.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Conta
rror code (1)
--
View this message in context:
http://debian.2.n7.nabble.com/gdm-broken-after-upgrade-from-squeeze-to-wheezy-tp2970296p2970450.html
Sent from the Debian User mailing list archive at Nabble.com.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of
e-from-squeeze-to-wheezy-tp2970296.html
Sent from the Debian User mailing list archive at Nabble.com.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1370729239867
Hi,
try
apt-get remove libmyodbc
apt-get dist-upgrade
It worked for me. It's the old thread, but maybe someone will have the
same problem.
Regards,
Adam
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debia
rlwbonsai, 6.05.2013:
> I attempted to upgrade my Averatec 3200 laptop from Squeeze to
> Wheezy on 5/5/13. The laptop has an AMD Athlon 486 processor
> and Unichrome graphics. The only non-Debian software
> installed on this machine is Mozilla Firefox. This laptop has
> successfully run Sarge,
Thanks. The Gnome terminal is now usable in XFCE. Can't check
rxvt because trying to start rxvt crashes X. Trying to start it
a second time, after logging in from the first crash, crashed
the system. I like rxvt from past experience but it seems not
to be an option in Wheezy. I really, really
> Gnome-session-fallback is installed. Classic Gnome is in the
> login menu. My comments relate to that.
>
> Not sure what you mean by 'default profile'. My guess
> is ~/.bashrc since I don't have a ~/.profile. I think the
> relevant section of ~/.bashrc is:
>
> # enable color support of ls a
Gnome-session-fallback is installed. Classic Gnome is in the
login menu. My comments relate to that.
Not sure what you mean by 'default profile'. My guess
is ~/.bashrc since I don't have a ~/.profile. I think the
relevant section of ~/.bashrc is:
# enable color support of ls and also add hand
This is my sources.list
#
# deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot
i386 Binary-1 ( 20060314)]/ etch main
#deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot
i386 Binary-1 (20060314)]/ etch main #deb
http://mirrors.kernel.org/debian squeeze main contrib #deb-
> -Gnome 3 will not run. Default Gnome is very limited in this
> machine.
Make sure Gnome's "Classic" mode (AKA, fallback mode) is installed. There is a
package for that. Consider installing MATE instead (Google for it.) They
recently released a new version which runs very smoothly. MATE is a
On Mon, May 06, 2013 at 09:14:39AM -0400, rlwbonsai wrote:
> I attempted to upgrade my Averatec 3200 laptop from Squeeze to
> Wheezy on 5/5/13. The laptop has an AMD Athlon 486 processor
> and Unichrome graphics. The only non-Debian software
> installed on this machine is Mozilla Firefox. This l
I attempted to upgrade my Averatec 3200 laptop from Squeeze to
Wheezy on 5/5/13. The laptop has an AMD Athlon 486 processor
and Unichrome graphics. The only non-Debian software
installed on this machine is Mozilla Firefox. This laptop has
successfully run Sarge, Etch, Lenny and Squeeze and was
s
On Tue, 04 Dec 2012 10:40:02 +0100
Jon Dowland wrote:
> I can't see the relevance of any of these for the problem at hand.
OK, suggest something of relevance for the problem specifically, like a better
less
'default' set of values for the /etc/apt/apt.conf file, explaining why.
I was suggestin
On Sun, Dec 02, 2012 at 08:35:51PM -0500, Charles Kroeger wrote:
> hummm...I don't know but I care nothing for these code words squeeze wheezy
> sid
> etc. I prefer good 'ol stable testing unstable experimental.
They both serve their own purposes. The code names continue to point
at the same rel
On Mon, 3 Dec 2012, Charles Kroeger wrote:
http://www.debian.org/devel/debian-installer/
I downloaded yesterday
debian-testing-i386-DVD-1.iso,
but it seems better to use the recommended beta4 release.
debian-wheezy-DI-b4-i386-DVD-1.iso
I just remark that the file name is now de
On Mon, 03 Dec 2012 10:10:02 +0100
Pierre Frenkiel wrote:
> As I already said, I'll spend less time installing Wheezy from the iso image
This just in:
http://www.debian.org/devel/debian-installer/
your troubles are over.
--
CK
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.o
On Sun, 2 Dec 2012, Charles Kroeger wrote:
hummm...I don't know but I care nothing for these code words squeeze wheezy sid
etc. I prefer good 'ol stable testing unstable experimental.
I don't understand. Presently, squeeze and stable are synonyms, but
squeeze will mean squeeze forever, an
Pierre Frenkiel wrote:
> Tom H wrote:
> >What's the output of "apt-cache policy"?
> ==> apt-cache policy
The problem is that your report, although I am sure is accurate,
is of conflicting information. It doesn't make sense. I am sure it
is what you are seeing. Don't get me wrong. But the con
On Sun, 02 Dec 2012 11:20:01 +0100
Pierre Frenkiel wrote:
> When I run
> # apt-get install
> I get "1763 ackages not upgraded"
hummm...I don't know but I care nothing for these code words squeeze wheezy sid
etc. I prefer good 'ol stable testing unstable experimental.
>today, I tried to
On Sun, 2 Dec 2012, Andrei POPESCU wrote:
apt-listbugs is making problems you could uninstall or disable it.
I was so sure that it was a required package that I didn't try that.
Removing it actually worked, but there are still so many dependencies
problems that I'll abandon, and install
On Du, 02 dec 12, 16:30:10, Pierre Frenkiel wrote:
> E: Sub-process /usr/sbin/apt-listbugs apt || exit 10 returned an
> error code (10)
> E: Failure running script /usr/sbin/apt-listbugs apt || exit 10
apt-listbugs is making problems you could uninstall or disable it.
> This time, I'm r
On Mon, 3 Dec 2012, Chris Bannister wrote:
What I'd do is: (as root)
apt-get update
apt-get install linux-image-3.2.0-4-686-pae udev grub apt dpkg
that failed with the same dependencies problem, but what worked was:
# apt-get install linux-image-3.2.0-4-686-pae
# apt-get install grub
On Sun, Dec 2, 2012 at 6:54 AM, Chris Bannister
wrote:
>
> apt-get update
> apt-get install linux-image-3.2.0-4-686-pae udev grub apt dpkg
I'd start with just the kernel and udev, possibly separately.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscr
On Sun, Dec 2, 2012 at 5:47 AM, Pierre Frenkiel
wrote:
> On Sun, 2 Dec 2012, Chris Bannister wrote:
>>
>> What is output of:
>>
>> apt-cache policy udev
>
>
>udev:
> Installed: 164-3
> Candidate: 175-7
> Version table:
> 175-7 0
>500 http://ftp.fr.debian.org/
[OOps, looks like I've jumped in when Bob's already helping. Feel free
to wait and see what Bob suggests, although I can't see any problem with
trying the following]
On Sun, Dec 02, 2012 at 11:47:46AM +0100, Pierre Frenkiel wrote:
> On Sun, 2 Dec 2012, Chris Bannister wrote:
>
> >What is output
On Sun, 2 Dec 2012, Chris Bannister wrote:
What is output of:
apt-cache policy udev
udev:
Installed: 164-3
Candidate: 175-7
Version table:
175-7 0
500 http://ftp.fr.debian.org/debian/ wheezy/main i386 Packages
*** 164-3 0
100 /var/lib/dpkg/s
On Sun, Dec 02, 2012 at 09:42:15AM +0100, Pierre Frenkiel wrote:
>
> hi Charles,
> thanks for your suggestions, but alas none worked in my case.
What is output of:
apt-cache policy udev
uname -a
apt-get -f install
--
"If you're not careful, the newspapers will have you hating the people
w
thanks Bob for your detailed reply
On Sat, 1 Dec 2012, Bob Proulx wrote:
Also check /etc/apt/sources.list.d/* for any additional files that are
contributing to the list. Ensure that there are none.
I had actually removed them
What was the reason for the reboot? Did you lose power? You
On Sat, 1 Dec 2012, Charles Kroeger wrote:
Try this:
#dpkg --configure -a
--
CK
p.s. this is an old one:
#apt-get -o Debug::pkgProblemResolver=yes dist-upgrade
hi Charles,
thanks for your suggestions, but alas none worked in my case.
best regards,
--
Pierre Frenkiel
--
To UNSUBSCRI
Pierre Frenkiel wrote:
> today, I tried to upgrade from squeeze to wheezzy:
Okay.
> - in source.list, I only left:
> deb http://ftp.fr.debian.org/debian/ wheezy main contrib non-free
Okay. Don't completely forget about security upgrades. But okay to
upgrade without to keep thing simple. B
On Sat, 01 Dec 2012 20:00:02 +0100
Pierre Frenkiel wrote:
> Is there a way to fix this dependency problem? I found nothing
> useful (at least for me) via Google, or debian forums.
Try this:
#dpkg --configure -a
--
CK
p.s. this is an old one:
#apt-get -o Debug::pkgProblemResolver=yes dist-u
On Sat, 1 Dec 2012, Tom H wrote:
The versions that apt's trying to install are squeeze ones.
not exactly: "5.1.6-1 is to be installed", curiously actually means:
"5.1.6-1 is installed"
What's the output of "apt-cache policy"?
==> apt-cache policy
Package files:
On Sat, Dec 1, 2012 at 1:14 PM, Pierre Frenkiel
wrote:
>
> today, I tried to upgrade from squeeze to wheezzy:
> - in source.list, I only left:
> deb http://ftp.fr.debian.org/debian/ wheezy main contrib non-free
>
> - then, apt-get update ; apt-get upgrade
> up to now, no problem, a lot of pa
hi,
today, I tried to upgrade from squeeze to wheezzy:
- in source.list, I only left:
deb http://ftp.fr.debian.org/debian/ wheezy main contrib non-free
- then, apt-get update ; apt-get upgrade
up to now, no problem, a lot of packages were upgraded
- but after reboot,running "apt-get dist-up
55 matches
Mail list logo