Re: network card bridging failing on wheezy

2014-11-10 Thread Gary Dale
On 10/11/14 12:50 AM, Christian Seiler wrote: Am 10.11.2014 01:33, schrieb Gary Dale: On 09/11/14 03:30 PM, Christian Seiler wrote: Could you post the contents of your /etc/default/networking? Specifically, it should have either no explicit settings (everything commented out) or the following s

Re: network card bridging failing on wheezy

2014-11-09 Thread Christian Seiler
Am 10.11.2014 01:33, schrieb Gary Dale: > On 09/11/14 03:30 PM, Christian Seiler wrote: >> Could you post the contents of your /etc/default/networking? >> Specifically, it should have either no explicit settings (everything >> commented out) or the following settings (which are default): >> >> CONF

Re: network card bridging failing on wheezy

2014-11-09 Thread Gary Dale
On 09/11/14 03:30 PM, Christian Seiler wrote: Am 09.11.2014 21:13, schrieb Gary Dale: You're right. Here's my default.xml (I only changed the addresses): root@TheLibrarian:/home/garydale# cat /etc/libvirt/qemu/networks/default.xml default Howeve

Re: network card bridging failing on wheezy

2014-11-09 Thread Christian Seiler
Am 09.11.2014 21:13, schrieb Gary Dale: > You're right. Here's my default.xml (I only changed the addresses): > > root@TheLibrarian:/home/garydale# cat /etc/libvirt/qemu/networks/default.xml > >default > > > > > > > > > > However when I removed the link t

Re: network card bridging failing on wheezy

2014-11-09 Thread Gary Dale
On 09/11/14 02:34 PM, Christian Seiler wrote: Am 09.11.2014 19:48, schrieb Gary Dale: This IP seems oddly familiar... Did you recently install libvirt? Because that's the default IP for libvirt's default internal bridged network (virbr0). Normally, that shouldn't interfere with the standard brid

Re: network card bridging failing on wheezy

2014-11-09 Thread Christian Seiler
Am 09.11.2014 19:48, schrieb Gary Dale: >> This IP seems oddly familiar... Did you recently install libvirt? >> Because that's the default IP for libvirt's default internal bridged >> network (virbr0). Normally, that shouldn't interfere with the standard >> bridge (different interface name), but ma

Re: network card bridging failing on wheezy

2014-11-09 Thread Gary Dale
On 09/11/14 05:09 AM, Karl E. Jorgensen wrote: Hi On Sat, Nov 08, 2014 at 05:57:41PM -0500, Gary Dale wrote: For some reason my network card bridging has failed after working properly for many years. My /etc/network/interfaces is: auto lo iface lo inet loopback iface eth0 inet manual auto br0

Re: network card bridging failing on wheezy

2014-11-09 Thread Gary Dale
On 09/11/14 05:27 AM, Christian Seiler wrote: Am 08.11.2014 23:57, schrieb Gary Dale: For some reason my network card bridging has failed after working properly for many years. My /etc/network/interfaces is: auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet static

Re: network card bridging failing on wheezy

2014-11-09 Thread Christian Seiler
Am 08.11.2014 23:57, schrieb Gary Dale: > For some reason my network card bridging has failed after working > properly for many years. > > My /etc/network/interfaces is: > > auto lo > iface lo inet loopback > iface eth0 inet manual > auto br0 > iface br0 inet static > address 192.168.1.

Re: network card bridging failing on wheezy

2014-11-09 Thread Karl E. Jorgensen
Hi On Sat, Nov 08, 2014 at 05:57:41PM -0500, Gary Dale wrote: > For some reason my network card bridging has failed after working > properly for many years. > > My /etc/network/interfaces is: > > auto lo > iface lo inet loopback > iface eth0 inet manual > auto br0 > iface br0 inet static >

network card bridging failing on wheezy

2014-11-08 Thread Gary Dale
For some reason my network card bridging has failed after working properly for many years. My /etc/network/interfaces is: auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet static address 192.168.1.14 netmask 255.255.255.0 broadcast 192.168.1.2