On Wed, 22 Oct 2003 21:18:56 +0100
Richard Kimber <[EMAIL PROTECTED]> wrote:
> On Wed, 22 Oct 2003 19:25:47 +0200
> [EMAIL PROTECTED] (Joachim Fahnenmueller) wrote:
>
> > > > > > $ mount /dev/scd0 /cdrom
> > > > > > mount: /dev/scd0 is not a valid block device
> > >
> > > This may not be the ans
[loonyx | rolf joho] wrote:
hi there
even though i load the ide-scsi module at boottime, i can not mount my
ide-dvd-writer. since i was perfectly able to do that on earlier
installations, i am asking for hints.
problem solved.
apparently one has to compile ide and ide-mod statically into the
On Fri, 24 Oct 2003, [loonyx | rolf joho] wrote:
> > In this case, ide-cd won't probe any drives on /dev/hdc
> >
>
> whyle trying this, i could no longer mount the drive as hdc (of course),
> but the ide-scsi stuff did not work either.
you have to boot the right kernel ..
- if lilo
Alexei Chetroi wrote:
If you can do that, then I think your dvd drive is using ide-cd module.
Please, make sure your /etc/modules.conf contain line like
options ide-cd ignore=hdc
In this case, ide-cd won't probe any drives on /dev/hdc
whyle trying this, i could no longer mount the drive as hdc (
I'm no expert here, but I think the fact that this works means that ide-cd
has got /dev/hdc, which is why ide-scsi doesn't grab it. I think there's
an option to tell ide-cd to explicitly ignore /dev/hdc, but I don't know
what it is.
ap
-
On Thu, Oct 23, 2003 at 12:47:54PM +0200, [loonyx | rolf joho] wrote:
> From: "[loonyx | rolf joho]" <[EMAIL PROTECTED]>
> To: debian-user mailinglist <[EMAIL PROTECTED]>
> Subject: Re: ide-scsi problem on woody
>
> >i bet that this works ( assuming the
i bet that this works ( assuming the kernel has been told by grub/lilo
the hdc=ide-scsi option )
mount -t iso9660 -o ro /dev/hdc /mnt/cdrom
and if it does ... make a link
cd /dev ; ln -s ./hdc cdrom ( for reading cd's )
cd /dev ; ln -s ./hdc cdrw ( for writing )
c ya
al
hi ya rolf
On Wed, 22 Oct 2003, [loonyx | rolf joho] wrote:
> dmesg gives me that:
> Oct 22 23:37:05 looney kernel: hdc: Hewlett-Packard DVD Writer 300,
> ATAPI CD/DVD-ROM drive
> Oct 22 23:37:05 looney kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Oct 22 23:37:05 looney kernel: hdc: ATAPI 40X
Alexei Chetroi wrote:
On Wed, Oct 22, 2003 at 09:28:56AM +0300, Alexei Chetroi wrote:
From: Alexei Chetroi <[EMAIL PROTECTED]>
> lsmod-output:
Module Size Used byNot tainted
nls_iso8859-1 2880 0 (autoclean)
ide-cd 26176 0 (autoclean)
Have you
Andreas Janssen wrote:
Hello
[loonyx | rolf joho] (<[EMAIL PROTECTED]>) wrote:
even though i load the ide-scsi module at boottime, i can not mount my
ide-dvd-writer. since i was perfectly able to do that on earlier
installations, i am asking for hints.
through /etc/modules i successfully load th
Alvin Oga wrote:
hi ya loonyx
if your dvd writer is on /dev/hdc
try using /dev/hdc instead of /dev/scd0
if it works .. link /dev/sg0 to /dev/hdc and fix fstab
also stick a boot (real) cdrom into the dvd drive, and see if it boots the
cdrom to eliminate any hardware/bios/cable issues
c y
[EMAIL PROTECTED] wrote:
Hi Rolf,
does /dev/scd0, /dev/sr0 and /dev/sg0 exist?
any info from dmesg or from /var/log/messages?
-Kev
yes they do exist:
brw-rw1 root cdrom 11, 0 Mar 14 2002 /dev/scd0
lrwxrwxrwx1 root root4 Aug 22 11:08 /dev/sr0 -> scd0
crwSrwS
On Wed, 22 Oct 2003 19:25:47 +0200
[EMAIL PROTECTED] (Joachim Fahnenmueller) wrote:
> > > > > $ mount /dev/scd0 /cdrom
> > > > > mount: /dev/scd0 is not a valid block device
> >
> > This may not be the answer, but I find that if I do
> > cdrecord -scanbus
> > when this happens, and then try the m
On Wed, Oct 22, 2003 at 03:34:52PM +0100, Richard Kimber wrote:
> On Wed, 22 Oct 2003 15:36:21 +0200
> Lukas Ruf <[EMAIL PROTECTED]> wrote:
>
> > > >
> > > > $ mount /dev/scd0 /cdrom
> > > > mount: /dev/scd0 is not a valid block device
>
> This may not be the answer, but I find that if I do
> cdr
> Lukas Ruf <[EMAIL PROTECTED]> [2003-10-22 17:34]:
>
> > Richard Kimber <[EMAIL PROTECTED]> [2003-10-22 17:00]:
> >
>
> > On Wed, 22 Oct 2003 15:36:21 +0200
> > Lukas Ruf <[EMAIL PROTECTED]> wrote:
> >
> > > > >
> > > > > $ mount /dev/scd0 /cdrom
> > > > > mount: /dev/scd0 is not a valid block
Richard,
> Richard Kimber <[EMAIL PROTECTED]> [2003-10-22 17:10]:
>
> On Wed, 22 Oct 2003 15:36:21 +0200
> Lukas Ruf <[EMAIL PROTECTED]> wrote:
>
> > I have been experiencing the same problems on 2.4.22:
>
> Why do you have this set like this?
>
> Reply-To: LIST-Reply <[EMAIL PROTECTED]>
>
>
> Richard Kimber <[EMAIL PROTECTED]> [2003-10-22 17:00]:
>
> On Wed, 22 Oct 2003 15:36:21 +0200
> Lukas Ruf <[EMAIL PROTECTED]> wrote:
>
> > > >
> > > > $ mount /dev/scd0 /cdrom
> > > > mount: /dev/scd0 is not a valid block device
>
> This may not be the answer, but I find that if I do
> cdrecor
On Wed, 22 Oct 2003 15:36:21 +0200
Lukas Ruf <[EMAIL PROTECTED]> wrote:
> I have been experiencing the same problems on 2.4.22:
Why do you have this set like this?
Reply-To: LIST-Reply <[EMAIL PROTECTED]>
It defeats Sylpheed's automatic reply-to-list facility.
- Richard.
--
Richard Kimber
htt
On Wed, 22 Oct 2003 15:36:21 +0200
Lukas Ruf <[EMAIL PROTECTED]> wrote:
> > >
> > > $ mount /dev/scd0 /cdrom
> > > mount: /dev/scd0 is not a valid block device
This may not be the answer, but I find that if I do
cdrecord -scanbus
when this happens, and then try the mount, it works.
Don't ask me w
On Wednesday 22 October 2003 14:54, Andrew Perrin wrote:
> > $ mount /dev/scd0 /cdrom
> > mount: /dev/scd0 is not a valid block device
>
> What if you use /dev/sda ?
$ mount /dev/sda /cdrom
mount: /dev/sda is not a valid block device
--
--- Magnus von Koeller ---
email:[EMAIL PROTECTED]
add
I have been experiencing the same problems on 2.4.22:
> Andrew Perrin <[EMAIL PROTECTED]> [2003-10-22 15:21]:
>
> >
> > $ mount /dev/scd0 /cdrom
> > mount: /dev/scd0 is not a valid block device
>
> What if you use /dev/sda ?
>
uccellina:~# mount -t iso9660 /dev/sda /mnt
mount: /dev/sda is not a
On Wed, 22 Oct 2003, Magnus von Koeller wrote:
> On Wednesday 22 October 2003 12:05, Joachim Fahnenmueller wrote:
> > Good idea. Not only look for error messages but also for _success_
> > messages, at some point it should say that it found the device.
>
> Now, what if it does report success but s
On Wednesday 22 October 2003 12:05, Joachim Fahnenmueller wrote:
> Good idea. Not only look for error messages but also for _success_
> messages, at some point it should say that it found the device.
Now, what if it does report success but still doesn't work:
$ cat /proc/scsi/scsi
Attached device
On Tue, Oct 21, 2003 at 05:02:10PM -0700, Alvin Oga wrote:
>
>
> On Tue, 21 Oct 2003, Joachim Fahnenmueller wrote:
>
> > Hi Rolf,
> >
> > maybe load ide-scsi *before* sr_mod ?
>
> if a module needed to be loaded in the right order,
> it'd complain about missing symbols not yet defined
> when i
On Tue, 21 Oct 2003, [loonyx | rolf joho] wrote:
> hi there
>
> even though i load the ide-scsi module at boottime, i can not mount my
> ide-dvd-writer. since i was perfectly able to do that on earlier
> installations, i am asking for hints.
>
> through /etc/modules i successfully load this:
> s
On Wed, Oct 22, 2003 at 09:28:56AM +0300, Alexei Chetroi wrote:
> From: Alexei Chetroi <[EMAIL PROTECTED]>
> lsmod-output:
> > Module Size Used byNot tainted
> > nls_iso8859-1 2880 0 (autoclean)
> > ide-cd 26176 0 (autoclean)
> Have you tried
On Tue, Oct 21, 2003 at 04:27:04PM +0200, [loonyx | rolf joho] wrote:
> Date: Tue, 21 Oct 2003 16:27:04 +0200
> From: "[loonyx | rolf joho]" <[EMAIL PROTECTED]>
> Subject: ide-scsi problem on woody
>
> even though i load the ide-scsi module at boottime, i can not mo
On Tue, 21 Oct 2003, Joachim Fahnenmueller wrote:
> Hi Rolf,
>
> maybe load ide-scsi *before* sr_mod ?
if a module needed to be loaded in the right order,
it'd complain about missing symbols not yet defined
when its dependency modules needed to be loaded first
manually loading um might show y
Hi Rolf,
maybe load ide-scsi *before* sr_mod ?
Joachim
On Tue, Oct 21, 2003 at 04:27:04PM +0200, [loonyx | rolf joho] wrote:
> hi there
>
> even though i load the ide-scsi module at boottime, i can not mount my
> ide-dvd-writer. since i was perfectly able to do that on earlier
> installations
hi ya loonyx
On Tue, 21 Oct 2003, [loonyx | rolf joho] wrote:
> hi there
>
> even though i load the ide-scsi module at boottime, i can not mount my
> ide-dvd-writer. since i was perfectly able to do that on earlier
> installations, i am asking for hints.
list of modules look good from eyebal
Hello
[loonyx | rolf joho] (<[EMAIL PROTECTED]>) wrote:
> even though i load the ide-scsi module at boottime, i can not mount my
> ide-dvd-writer. since i was perfectly able to do that on earlier
> installations, i am asking for hints.
>
> through /etc/modules i successfully load this:
> sr_mod
hi there
even though i load the ide-scsi module at boottime, i can not mount my
ide-dvd-writer. since i was perfectly able to do that on earlier
installations, i am asking for hints.
through /etc/modules i successfully load this:
sr_mod
ide-scsi
my complete lsmod can be found at the end of the
32 matches
Mail list logo
