Hi,
> Mind saying what module, exactly and where you got it from?
Sorry, I have a broadcom 4311 rev 1 and from an old install I was
using the ndiswrapper module, I've switched to b43 from the debian/
testing repository (I'm gently switching from unstable to testing).
Antonio Diaz,
Maybe could you
On Monday 04 August 2008 23:57, Antegallya wrote:
> Hi,
>
> > Could be a problem with the network adapter or the module. Try a
> > different adapter in the box?
>
> for me using an alternative module solved the problem.
Mind saying what module, exactly and where you got it from?
--
Shachar Or |
Hi,
> Could be a problem with the network adapter or the module. Try a
> different adapter in the box?
for me using an alternative module solved the problem.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Monday 04 August 2008 22:25, Antonio Diaz wrote:
> Ok, I should have written a bit more. Maybe these points are helpful:
>
> * I've also installed Windows XP on my laptop and it works fine so I'm
> sure that the problem has to do with my linux configuration.
>
> * I've tested different kernel
Ok, I should have written a bit more. Maybe these points are helpful:
* I've also installed Windows XP on my laptop and it works fine so I'm
sure that the problem has to do with my linux configuration.
* I've tested different kernel versions (three of them).
* "dmesg" seems to say that the in
Hi,
I'm using Debian Sid too, and I have the same problem but for me it
is on wlan0 interface and I don't have any problem with eth0.
The problem appears on several wireless access points with or without
encryption, strangely, on some access points it "works better" than on
others (another machine
On Monday 04 August 2008 00:56, Antonio Diaz wrote:
>Hi
>
>I'm using Debian Sid (kernel 2.6.26). I need to configure the eth0 so
> it uses the dhcp. In my case the "dhclient" never gets response at boot
> time. Later, I have to restart the service "/etc/init.d/networking" to
> get a IP. Som
Hi
I'm using Debian Sid (kernel 2.6.26). I need to configure the eth0 so
it uses the dhcp. In my case the "dhclient" never gets response at boot
time. Later, I have to restart the service "/etc/init.d/networking" to
get a IP. Sometimes I've also problems at this point. I don't not why
bu
8 matches
Mail list logo
