I've also added "alias eth0 via-rhine" to /etc/modutils/aliases, not sure if
this is really necessary though.
- Original Message -
From: "Willi Dyck" <[EMAIL PROTECTED]>
To: "debian-list"
Sent: Tuesday, November 07, 2000 5:31 PM
Subject: D-Link Aga
Hi
i did compile the module you hav sent me. but it didn't work, anyway.
then i did something not logical.
in /etc/modules.conf is a line like:
options via-rhine irq=9
and in /etc/modutils/via-rhine:
options via-rhine irq=9
i commented out both and then the card worked!! i was very surprised about
>
> Are you sure you have a 530TX and not a 530TX+
>
> They use different drivers. The TX+ uses the rtl8139 (RealTek) driver.
>
DFE 530TX has two version, version A and version B.
if you use 530TX version A, you can use the drivers included in the
kernel
I use version B. I compiled t
Are you sure you have a 530TX and not a 530TX+
They use different drivers. The TX+ uses the rtl8139 (RealTek) driver.
Willi Dyck <[EMAIL PROTECTED]> wrote:
: Hi Debianers,
: i've posted a similar mail a few weeks ago but didn't get
: a satisfied answer. so i am going to try it again.
: i have
ting it to work (V4 needs drivers other than what's in the
2.2.x tree), so I thought I'd try the D-Link again just for the hell of
it. Loe and behold, it worked, and has been ever since. So, the
problem may not be in your configuration, but the card itself. I still
don't know
Hi Debianers,
i've posted a similar mail a few weeks ago but didn't get
a satisfied answer. so i am going to try it again.
i have a D-Link 530TX nic. i know that it is a via-rhine chip-set.
and i have also seen many poeple using that card on this list. so it
works, somehow. i have compiled the vi
6 matches
Mail list logo
